• Tuberculosis and Respiratory Diseases
• /
• v.43 no.5
• /
• pp.728-735
• /
• 1996

Background : Recognition and ingestion of opsonized microorganisms by neutrophils induces the burst of oxidative metabolic activity. Products of the respiratory burst activity provide powerful oxygen dependent killing mechanism. Measurement of respiratory burst activity has been a major indicator of the functional capacity of neutrophils. We determined the respiratory burst activity of neutrophils in patients with pneumonia and observed the changes during the clinical course of pneumonia. Methods: The EDTA blood was drawn from 24 normal controls and same numbers of pneumonia patients. The respiratory burst activity(with the production of $H_2O_2$ which changes nonfluorescent DCF-DA to green fluorescent DCF) in the non-stimulated state and the stimulated state with fMLP and PMA of neutrophils was measured by flowcytometry at day 1, 3, 5, 7 and 9 of admission. Results: The respiratory burst activity of neutrophils was mildly increased by stimulation with fMLP. But there was no statistical significance between normal control and patients with pneumonia. The respiratory burst activity of neutrophils was markedly increased by stimulation with PMA in both groups. There was a significant difference in response to PMA between normal control and patients with pneumonia. The production of hydrogen peroxide from neutrophils was decreased during early course of pneumonia and it was recuperated gradually to normal level in 9 days. Conclusion : Hydrogen peroxide production from neutrophils was suppressed during early course of pneumonia and restored after treatment. It is suggested that the production of oxygen radical in response to PMA stimulation from each neutrophils is decreased rather than increased during the early course of pneumonia.

• Korean Journal of Acupuncture
• /
• v.35 no.4
• /
• pp.166-173
• /
• 2018

Objectives : Woogakseungmatang is a prescription medication mainly used to treat facial paralysis in Korean medicine. The purpose of this study is to investigate the effects of Woogakseungmatang on anti-inflammation and anti-oxidation. Methods : Woogakseungmatang was extracted using hot water. Cytotoxicity was assessed using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide(MTT) method; nitric oxide(NO) production and Prostaglandin $E_2$ ($PGE_2$) production in RAW cells treated with Woogakseungmatang were investigated; and the cytokine changes associated with inflammation were examined. The antioxidant capacity of Woogakseungmatang was measured using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) method. Results : RAW cells treated with Woogakseungmatang showed 90% cell viability at a $100-{\mu}g/ml$ concentration. NO production was decreased by 15% at a $100-{\mu}g/ml$ concentration. $PGE_2$ production was decreased by 18% at a $100-{\mu}g/ml$ concentration. Interleukin $1{\beta}$ ($IL-1{\beta}$), interleukin 6(IL-6), and tumor necrosis factor-${\alpha}$ ($TNF-{\alpha}$) were significantly reduced at $100{\mu}g/ml$ compared with those in the control group. The DPPH free radical scavenging capability was more than 50% at $100{\mu}g/ml$. Conclusions : Woogakseungmatang showed only a slight anti - inflammatory effect at $100{\mu}g/ml$ and it was difficult to confirm the concentration-dependent anti-inflammatory effect. Therefore, this study means to confirm the potential anti-inflammatory effects of Woogakseungmatang. Based on this research, more systematic and diverse studies should be conducted.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.258-263
• /
• 2023

In this study, conductive polymers and the enzyme tyrosinase (Tyr) were deposited on the surface of a screen printed carbon electrode (SPCE), which can be fabricated as a disposable sensor chip, and applied to the detection of bisphenol F (BPF), an endocrine disruptor with proven links to male diseases and thyroid disorders, using electrochemical methods. On the surface of the SPCE working electrode, which was negatively charged by oxygen plasma treatment, a positively charged conductive polymer, poly(diallyldimethyl ammonium chloride) (PDDA), a negatively charged polymer compound, poly(sodium 4-styrenesulfonate) (PSS), and another layer of PDDA were layered by electrostatic attraction in the order of PDDA, PSS, and finally PDDA. Then, a layer of Tyr, which was negatively charged due to pH adjustment to 7.0, was added to create a PDDA-PSS-PDDA-Tyr sensor for BPF. When the electrode sensor is exposed to a BPF solution, which is the substrate and target analyte, 4,4'-methylenebis(cyclohexa-3,5-diene-1,2-dione) is generated by an oxidation reaction with the Tyr enzyme on the electrode surface. The reduction process of the product at 0.1 V (vs. Ag/AgCl) generating 4,4'-methylenebis(benzene-1,2-diol) was measured using cyclic and differential pulse voltammetries, resulting in a change in the peak current with respect to the concentration of BPF. In addition, we compared the detection performance of BPF using an ionic liquid electrolyte as an alternative to phosphate-buffered saline, which has been used in many previous sensing studies. Furthermore, the selectivity of bisphenol S, which acts as an interfering substance with a similar structure to BPF, was investigated. Finally, we demonstrated the practical applicability of the sensor by applying it to analyze the concentration of BPF in real samples prepared in the laboratory.

• Economic and Environmental Geology
• /
• v.35 no.5
• /
• pp.379-393
• /
• 2002

Within the Boseong-Jangheung area of Korea, five hydrothermal gold (-silver) quartz vein deposits occur. They have the characteristic features as follows: the relatively gold-rich nature of e1ectrurns; the absence of Ag-Sb( -As) sulfosalt mineral; the massive and simple mineralogy of veins. They suggest that gold mineralization in this area is correlated with late Jurassic to Early Cretaceous, mesothermal-type gold deposits in Korea. Fluid inclusion data show that fluid inclusions in stage I quartz of the mine area homogenize over a wide temperature range of 200$^{\circ}$ to 460$^{\circ}$C with salinities of 0.0 to 13.8 equiv. wt. % NaCI. The homogenization temperature of fluid inclusions in stage II calcite of the mine area ranges from 150$^{\circ}$ to 254$^{\circ}$C with salinities of 1.2 to 7.9 equiv. wt. % NaCI. This indicates a cooling of the hydrothermal fluid with time towards the waning of hydrothermal activity. Evidence of fluid boiling including CO2 effervescence indicates that pressures during entrapment of auriferous fluids in this area range up to 770 bars. Calculated sulfur isotope composition of auriferous fluids in this mine area (${\delta}^34S$_{{\Sigma}S}$$\textperthousand$) indicates an igneous source of sulfur in auriferous hydrothermal fluids. Within the Sobaegsan Massif, two representative mesothermal-type gold mine areas (Youngdong and Boseong-Jangheung areas) occur. The ${\delta}^34S values of sulfide minerals from Youngdong area range from -6.6 to 2.3$\textperthousand$ (average=-1.4$\textperthousand$, N=66), and those from BoseongJangheung area range from -0.7 to 3.6$\textperthousand$ (average=1.6$\textperthousand$, N=39). These i)34S values of both areas are comparatively lower than those of most Korean metallic ore deposits (3 to 7TEX>$\textperthousand$). And, within the Sobaegsan Massif, the ${\delta}^34S values of Youngdong area are lower than those of Boseong-Jangheung area. It is inferred that the difference of ${\delta}^34S values within the Sobaegsan Massif can be caused by either of the following mechanisms: (1) the presence of at least two distinct reservoirs (both igneous, with ${\delta}^34S values of < -6 $\textperthousand$ and 2$\pm$2 %0) for Jurassic mesothermal-type gold deposits in both areas; (2) different degrees of the mixing (assimilation) of 32S-enriched sulfur (possibly sulfur in Precambrian pelitic basement rocks) during the generation and/or subsequent ascent of magma; and/or (3) different degrees of the oxidation of an H2S-rich, magmatically derived sulfur source ${\delta}^34S = 2$\pm$2$\textperthousand$) during the ascent to mineralization sites. According to the observed differences in ore mineralogy (especially, iron-bearing ore minerals) and fluid inclusions of quartz from the mesothermal-type deposits in both areas, we conclude that pyrrhotite-rich, mesothermal-type deposits in the Youngdong area formed from higher temperatures and more reducing fluids than did pyrite(-arsenopyrite)-rich mesothermal-type deposits in the Boseong-Jangheung area. Therefore, we prefer the third mechanism than others because the ${\delta}^34S values of the Precambrian gneisses and Paleozoic sedimentary rocks occurring in both areas were not known to the present. In future, in order to elucidate the provenance of ore sulfur more systematically, we need to determine ${\delta}^34S values of the Precambrian metamorphic rocks and Paleozoic sedimentary rocks consisting the basement of the Korean Peninsula including the Sobaegsan Massif.

• Economic and Environmental Geology
• /
• v.34 no.6
• /
• pp.507-522
• /
• 2001

At the Tongyeong mine, quartz, rhodochrosite (kutnahorite), muscovite, illite, pyrite, galena, chalcopyrite. sphalerite, acanthite, and hessite are the principal vein minerals. They were deposited under epithermal conditions in two stages. Ore mineral assemblages and associated gangue phases in stage can be clearly divided into two general associations: an early cycle (band) that appeared with introduction of most of the sulfides and electrum, and a later cycle in which base metal and carbonate-bearing assemblages (mostly rhodochrosite) became dominant. Tellurides and some electrum occur as small rounded grains within subhedral-to euhedral pyrite or anhedral galena in stageII. Sulfide mineralization is zoned from pyrite to galena and sphalerite. We have used computer modeling to simulate formation of four stages of vein genesis. The reaction of a single fluid with andesite host rock at 28$0^{\circ}C$, isobaric cooling of a single fluid from 26$0^{\circ}C$ to 12$0^{\circ}C$, and boiling and mixing of a fluid with both decreasing pressure and temperature were studied using the CHILLER program. Calculations show that the precipitation of alteration minerals is due to fluid-andesite interaction as temperature drops. Speciation calculations confirm that the hydrothermal fluids with moderately high salinities and pH 5.7 (acid), were capable of transporting significant quantities of base metals. The abundance of gold in fluid depends critically on the ratio of total base metals and iron to sulfide in the aqueous phase because gold is transported as an Au(HS)$_2$- complex, which is sensitive to sulfide activity. Modeling results for Tongyeong mineralization show strong influence of shallow hydrogenic processes such as boiling and fluid mixing. The variable handing in stageII mineralization is best explained by maltiple boilings of hydrothermal fluid followed by lateral mixing of the fluid with overlying diluted, steam-heated ground water. The degree of similarity of calculated mineral assemblages and observed electrum composition and field relationships shows the utility of the numerical simulation method in identifying chemical processes that accompany boiling and mixing in Te-bearing Au-Ag system. This has been applied in models to narrow the search area for epithermal ores.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.169-175
• /
• 2018

This study deals with a process for the recovery of hydrogen isotopes from methane ($CQ_4$) and water ($Q_2O$) containing tritium in the nuclear fusion exhaust gas (Q is Hydrogen, Deuterium, Tritium). Steam Methane Reforming and Water Gas Shift reactions are used to convert $CQ_4$ and $Q_2O$ to $Q_2$ and the produced $Q_2$ is recovered by the subsequent Pd membrane. In this study, one circulation loop consisting of catalytic reactor, Pd membrane, and circulation pump was applied to recover H components from $CH_4$ and $H_2O$, one of $CQ_4$ and $Q_2O$. The conversion of $CH_4$ and $H_2O$ was measured by varying the catalytic reaction temperature and the circulating flow rate. $CH_4$ conversion was 99% or more at the catalytic reaction temperature of $650^{\circ}C$ and the circulating flow rate of 2.0 L/min. $H_2O$ conversion was 96% or more at the catalytic reaction temperature of $375^{\circ}C$ and the circulating flow rate of 1.8 L/min. In addition, the amount of $CQ_4$ generated by Korean Demonstration Fusion Power Plant (K-DEMO) in the future was predicted. Then, the treatment process for the $CQ_4$ was proposed and HAZOP (hazard and operability) analysis was conducted to identify the risk factors and operation problems of the process.

• Economic and Environmental Geology
• /
• v.8 no.1
• /
• pp.1-23
• /
• 1975

The subject of this study deals with phase relations between stannite ($Cu_2FeSnS_4$) and sphalerite (${\beta}-ZnS$)/wurtzite (${\alpha}-ZnS$). The phase relations were systematically investigated from liquidus temperature to $400^{\circ}C$ under controlled conditions. ${\beta}-stannite$ (tetragonal) is stable up to $706{\pm}5^{\circ}C$, where it inverts to a high-temperature polymorph ${\alpha}-stannite$ (cubic) melting congruently at $867{\pm}5^{\circ}C$. Sphalerite (cubic, ${\beta}-ZnS$) inverts at $1013{\pm}3^{\circ}C$ to wurtzite, which is the hexagonal hightemperature polymorph of ZnS. Between ${\alpha}-stannite$ and sphalerite a complete solid solution series exists above approximately $870^{\circ}C$ up to solidus temperature. The melting temperature of ${\alpha}-stannite$ rises towards sphalerite and reaches a maximum at $1074{\pm}3^{\circ}C$, which is the peritectic with the composition of 91 wt. % sphalerite and 9 wt. % ${\alpha}-stannite$. At this temperature, wurtzite takes only 5wt. % ${\alpha}-stannite$ in solid solution which decreases with increasing temperature. The inverson temperature of ${\alpha}/{\beta}-stannite$ is lowered with increasing amounts of sphalerite in solid solution down to $614{\pm}7^{\circ}C$, which is the eutectoid with the composition of 13 wt. % sphalerite and 87 wt. % ${\alpha}-stannite$. Here, ${\beta}-stannite$ contains only 10wt. % sphalerite in solid solution. With decreasing temperature, the ranges of the solid solution on both sides of the system narrow. The phase relations in the above pure system changed due to the FeS impurities in the sphalerite solid solution. The eutectoid increased from $614{\pm}7^{\circ}C$ up to $695{\pm}5^{\circ}C$ (5 wt. % FeS) and $700{\pm}5^{\circ}C$ (10wt. % FeS), while the peritectic decreased from $1074{\pm}3^{\circ}C$ down to $1036{\pm}3^{\circ}C$ (wt. %FeS) and $987{\pm}3^{\circ}C$ (10wt. %FeS). A most notable change is the appearance of non-binary regions. An important feature is the combination of this study system with the experimental results reported by Sprinfer (1972). If a stannite-kesterite solid solution is used in the place of stannite as a bulk composition, the inversion temperature is lowered to less than $400^{\circ}C$ which belongs to temperatures of the hydrothermal region.

• Journal of Life Science
• /
• v.22 no.3
• /
• pp.407-416
• /
• 2012

In this study, we purified the extracts from the seeds and the roots of various plant species, including Q. acutissima, C. lanceolata, P. mirifica, P. bambusoides, and S. repens, and then investigated the effects of these extracts on cell growth and fat accumulation in adipocytes. We found that the extracts purified from Q. acutissima, C. lanceolata, P. mirifica, P. bambusoides, and S. repens more effectively increased the cell growth, as well as promoting the fat accumulation in adipocytes to a greater extent, than other extracts in vitro. Therefore, we made breast packs containing these effective extracts, and then investigated whether they were effective in enhancing the elasticity and volume of women's breasts. The measurements of breast elasticity and size revealed that the breast packs efficiently increased the elasticity and size of women's breasts. Furthermore, evaluation of the questionnaires related to usage of the breast packs indicated great satisfaction in terms of the lift, firmness, and elasticity of breasts. In conclusion, extracts purified from Q. acutissima, C. lanceolata, P. mirifica, P. bambusoides, and S. repens leading to cell growth and fat accumulation in adipocytes can effectively contribute to improving the elasticity and size of women's breasts.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.4
• /
• pp.407-417
• /
• 2018

In this study, the antioxidant, cytoprotective and antimicrobial activities of 50% ethanol extract of Polygoni multiflori Radix (PMR) and its ethyl acetate fraction were evaluated to confirm the applicability as a functional ingredient. The activities of the major constituent of PMR were verified and 2, 3, 5, 4′-tetrahydroxystilbene 2-O-${\beta}$-D-glucoside (THSG) was confirmed to be the main component of extract and fraction using HPLC-DAD, LC-EIS-MS analysis. The phenolic and THSG contents of the ethyl acetate fraction were 11.1- and 3.0-folds higher than those of the ethanol extract, respectively. As a result of the DPPH assay and that of luminol dependent chemiluminescence assay in $Fe^{3+}$-EDTA/H2O2 system. the ethylacetate fraction was superior to the ethanol extract in free radical and ROS scavenging activities. Especially, the ethyl acetate fraction and THSG exhibited the similar scavenging activity like L-ascorbic acid in ROS scavenging activity. The ethyl acetate fraction perceived the most potent cytoprotective effect against oxidative damage of erythrocytes induced by photosensitization reaction, followed by the ethanol fraction, THSG and that of (+)-${\alpha}$-tocopherol, which was used as a positive control. Antimicrobial activities were evaluated by disc diffusion and broth microdilution assay against S. aureus, E. coli, P. aeruginosa and C. albicans. In particular, the antibacterial activity of the extract and fraction against S. aureus was superior to that of methyl paraben. Taken together, our results suggest that PMR could be used as a natural ingredient for antioxidant, cytoprotective and antimicrobial activities.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.120-128
• /
• 2020

In this study, solid capsules using crystal growth-type inorganic materials that can be directly mixed with mortar were prepared. Thus, three levels of solid capsules were prepared. The prepared solid capsule was mixed with 3% of the cement mass, was evaluated quality and crack healing properties of the mortar. As a test results of the table flow and air content of the mortar mixed with the solid capsules showed that mix of the solid capsules was no effect on the table flow and air volume. As a test result of the crack healing properties of the mortar mixed with the solid capsule according to water flow test and crack closing test, the initial flow rate was decreased, it was confirmed that the reaction product occurred over time and the cracks were healed.