• The Korean Journal of Mycology
• /
• v.39 no.2
• /
• pp.99-104
• /
• 2011

Shiitake breeding requires the procedures of mating of two different parental strains and selection of hybrid strains that have good traits for the mushroom production. In this study, we tested the possibility of the use of chromogenic plate-based assay for extracellular enzyme production in order to assess and find good biochemical properties-possessed hybrid strains that were generated from genetic cross of the monokaryotic strains derived from two different parental strains of Lentinula edodes Sanjo-101ho and Sanjo-108ho. We observed that there was difference in the ability of producing ${\beta}$-glucosidase, avicelase, CM-cellulase, amylase, pectinase, xylanase, and protease among the monokaryotic strains. We could also comparatively assess that the ability of the seven extracellular enzymes production in the hybrid strains depended on the mating combination of the monokaryotic strains. Our results demonstrate that the assessment method for extracellular enzyme production using chromogenic plate assay could be usefully applied to the assessment of the hybrid strains derived from the breeding procedure of L. edodes.

• Parasites, Hosts and Diseases
• /
• v.29 no.4
• /
• pp.339-354
• /
• 1991

Localization and characterization of the antigenic components of sparganum which induced IgG and IsM antibodies in the host were studied by immunohistochemical techniques and SDS-PAGT and Western blotting. The antigen recognized by IgG antibody of rats or mice which were immunised by infection or injection of crude extracts of metacestodes of Spirometra erinacei, was located in the parenchyme of sparganum, especially at the cortex and around the calcareous corpuscles. The immunoreaction was demonstrated not only in the encysted fibrous wall of host but around the arterioles or venules in the connective tissue of host. The antigen recognized by IgM antibody of rats or mice was also observed in the parenchyme of sparganum and in the connective tissue of host. By 5∼20% gradient SDS-PAGE and EIBT, we detected antigenic components by IgG and 1gG antibodies of the rat or mouse immunized by infection or injection of crude extract of spargana. Twenty-three antigenic bands from crude extracts of spargana were recognized by IgG antibody and 15 components by IgM antibody of immunized rats. Out of the bands recognized by IgG and IgM antibodies, 15 were cross-reacted each other. Twenty components of eBlcretory-secretory proteins from spargana were recognized by IgG, and 5 components by IgM antibody of immunized rats. By IgG and IgM antibodies of immunized mice, 16 components of crude extracts were recognized by IgG antibody and 9 components by IgM antibody. Twenty components of excretory-secretory preparation were recognized by IgG antibody and 5 components by IgM antibody. Thirteen components of crude extracts were cross-reacted by IgG antibody of rats and mice.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.106.1-106.1
• /
• 2010

본 연구는 팜 부산물로부터 바이오 에탄올을 생산하는 전처리-당화-발효 공정의 첫 번째 단계인 전처리 공정에서 팜 부산물을 NaOH를 이용하여 효율적으로 전처리하고자 하였다. 암모니아 침지법과 NaOH 침출법을 비교한 결과 팜 부산물에 대해서는 암모니아 침지에 의한 탈리그닌 효과가 적으며 NaOH 전처리가 적합한 방법임을 알 수 있었다. 40-100 mesh 크기의 팜 부산물을 이용하여 반응온도(110, 130, $150^{\circ}C$), 반응시간(20, 40, 60분) 및 NaOH 농도(5%, 11%)의 변화에 따른 팜 부산물의 탈리그닌율과 글루코스 및 자일로스 회수율 간의 상호관계를 확인하였다. $150^{\circ}C$까지의 온도 조건에서 온도에 의한 자일로스의 분해는 일어나지 않는 것으로 확인되었다. 팜 부산물의 탈리그닌율은 시간이 증가할수록 증가하였으며, 높은 NaOH 농도에서 더 높은 것으로 나타났다. 그러나 글루코스 및 자일로스의 회수율은 높은 농도에서 낮게 나타났으며, 시간이 지날수록 감소하여 손실이 많은 것으로 나타났다. 따라서 NaOH 농도가 낮을수록 당 회수율은 높게 나타나지만, 탈리그닌율이 낮아 당화 효율이 떨어지므로 효소 당화 후에 최종 당 회수율이 높은 NaOH 농도 조건을 결정하여야 하겠다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.3
• /
• pp.166-171
• /
• 2008

In this paper, the optimization design module for the brake system of a vehicle is developed. As using this module, design variables, that minimize an object function and satisfy nonlinear constraint conditions, can be found easily. Before an optimization is operated, Plackett-Burman design, one of the factorial design methods, is used to choose the design variables which affect a response function significantly. Using the response surface analysis, second order recursive model function, which informs a relation between design variables and response function, is estimated. In order to verify the reliability of the model function, analysis of variances(ANOVA) table is used. The value of design variables which minimize the model function and satisfy the constraint conditions is predicted through Sequential Quadratic-Programming (SQP) method. As applying the above procedure to a real vehicle simulation model and comparing the values of object functions of a current and optimized system, the optimization results are verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.787-794
• /
• 2010

This paper aims to evaluate the effect of each material ingredient on mechanical and dynamic performance and to determine an optimal mixing condition of a rubber granule layer. To minimize the required number of tests, the test matrix was established by using the design of experiments (DOE). The tensile tests were then performed to identify the mechanical properties. Also, to evaluate the dynamic performance that the IAAF has required for athletics tracks for athletes' safety and balance, a series of impact tests were performed by using the so-called the "artificial athlete" machine. Finally, the response surface methodology was used to decide the optimal mixing conditions needed to achieve a high level of mechanical properties and dynamic performance.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.594-599
• /
• 1995

Generally, excessive soil water stress in vegetative growth stage inhibits the growth of soybeans. Leaf area expansion of the plant during excessive soil water stress was only half and the respiration of roots was much diminished compared with the plant none water stress. When excessive soil water stress to the soybeans was continued for 7 days, outer epidermis and vascular system of tap root were severely cracked, more than thirty-five percent of nodule was died and the bacteroid layers of alive nodule were disintegrated.

• Economic and Environmental Geology
• /
• v.40 no.2 s.183
• /
• pp.141-151
• /
• 2007

This study was focused on iron removal from illite by L-ascorbic and oxalic acids. Iron has been shown as a secondary mineral such as iron oxides and hydroxides in illite ores. It is also known as a primary agent to degrade brightness index of the ores. Methods such as physical separation and chemical leaching with strong inorganic acids have been widely used to remove the iron from the ores. However, these methods are expensive and give rise to environmental problems. In this study, we examined an alternative method using solutions with different set of combination of sulfuric, hydrochloric, L-ascorbic, and oxalic acids. Compared to chemical treatments with only inorganic acids, our results demonstrate that an addition of L-ascorbic acid in inorganic acids results in decreasing both total concentrations of the inorganic acids and time for the treatments. The treatment with 0.15 M L-ascorbic acid and 0.25 M sulfuric acid in solution for 60 min significantly improved the brightness index from 42.4% to 74.4%. This improvement is similar to that of treatment with only 2.5 M sulfuric acid alone for 150 min. Mineralogical and chemical analyses were performed to compare the effect of acid leaching on illite powders. No obvious differences are observed in the mineralogical characteristics and particle size distributions of the samples. These results suggest that the treatment with the addition of L-ascorbic acid in sulfuric acid could effectively remove iron without modifying the physicochemical properties of illite under conditions used in this study.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.10
• /
• pp.61-68
• /
• 2010

A pilot-scale model test was performed to estimate the availability of new material, Fe-loaded zeolite, as the filling material in permeable reactive barrier (PRB) against the contaminated groundwater with both Cd and Cr(VI). Aquifer was simulated by filling up a large scale soil tank with sands, and mobilizing the water flow by the head difference of water level in both ends of the tank. Then, the mixture of concentrated Cd and Cr(VI) solution was injected into the aquifer to form a contaminant plume, and its behavior through Fe-loaded zeolite barrier was monitored. The test results showed that Fe-loaded zeolite barrier successfully treated the contaminant plume containing both Cd and Cr(VI) and that the immobilized contaminants in the barrier were not desorbed or released. The results indicated that the Fe-loaded zeolite could be a promising material in PRBs against the multiple contaminants with different ionic forms like Cr(VI) and Cd.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.992-998
• /
• 1996

The $La_{0.8}Ca_{0.2}CoO_3$ prepared by a citrate process was shown to have higher oxygen reduction current density and specific activity than $LaCoO_3$, $La_{0.6}Ca_{0.4}CoO_3$. In the cyclic voltammogram, an oxygen desorption peak of a $La_{0.8}Ca_{0.2}CoO_3$+carbon electrode was larger than that of a only carbon electrode. $La_{0.8}Ca_{0.2}CoO_3$ sintered at $900^{\circ}C$ for 5 hours was shown high oxygen reduction current density because of the particle size distribution and sintering effect.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.535-541
• /
• 2015

In this study, an approximate multi-objective optimization of a wall-mounted monitor bracket arm was performed. The rotation angle of the bracket arm was determined considering the inplane degree of freedom. We then formulated an optimization problem on maximum stress and deflection. Analyses of mean and design parameters were conducted for sensitivity regarding performance with orthogonal array and response surface method (RSM). RSM models of objective and constraint functions were generated using central composite (CCD) and D-optimal design. The accuracy of approximate models was evaluated through $R^2$ value. The obtained optimal solutions by non-dominant sorting genetic algorithm (NSGA-II) were validated through the finite element analysis and we compared the obtained optimal solution by CCD and D-optimal design.