• The Journal of Natural Sciences
• /
• v.1
• /
• pp.33-45
• /
• 1987

$BaCO_3$ 와 다양한 입자크기의 $TiO_2$ 의 고체상태 반응을 산소 ( 혹은 공기 ) 와 이산화탄소 중에서 열중량 분석법 (TG) 과 시차 열분석법 (DTA) 를 이용하여 반응속도론 및 반응기구를 조사하였다. 중간생성물과 최종생성물의 확인은 X-ray 회절 분석법 (XRD) 을 이용하였다. $TiO_2$ 의 반응성은 입자의 크기가 $0.15\mum$이하일 때 현저히 증가하였다. 반응초기에 $BaTiO_3$ 는 반응물의 접촉표면에서 생기기 시작하며 반응의 진행과정은 Jander 에 따라 확산조절과정이 된다. 반응과정에서 BaO-$TiO_2$ 의 상평형도에 기술된 화합물들이 중간물질로써 나타난다. 공기중에서는 상당한 양의 $Ba_2$$TiO_4$ 가 생성되지만 $CO_2$ 의 분위기에서는 약 $1100^{\circ}C$까지 억제된다. 이 온도는 열역학적 계산치인 $1060\pm$ $50^{\circ}C$와 잘 일치하고 있다. 확산과정의 활성화 에너지 값은 공기중에서는 56.4Kcal/mol 이었으며 이산화탄소의 경우에서는 79.6Kacl/mol 이었다.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.325-329
• /
• 2018

In this study, polyphenols were extracted from Angelica, which are known to have a high antioxidant content and the extraction process was optimized using the response surface methodology. The extraction yield and the total polyphenols were set as response values for the methodology. Quantitative factors in the extraction process were the extraction time, volume ratio of alcohol/ultrapure water, and extraction temperature. When considering both the main and interaction effects, the greatest influence factor on the extraction yield and total polyphenols was the extraction time. The optimum extraction time and temperature and alcohol/ultrapure water volume ratio for angelica were 2.8 h, $56.6^{\circ}C$ and 64.0 vol% respectively. The extraction yield and total polyphenols when using the conditions were calculated to be 24.6% and 8.76 mg GAE/g. respectively. Determination coefficients of regression equations for the extraction yield and total polyphenols were 81.4 and 75.4%, respectively. Also the overall satisfaction level was found to be 0.80 and the significance was confirmed within 5%.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.127-134
• /
• 2005

Although the bulk composition of materials is one of the major considerations in extractive metallurgy and environmental science, surface composition and topography control surface reactivity, and consequently play a major role in determining metallurgical phenomena and pollution by heavy metals and organics. An understanding of interaction mechanisms of different chemical species at the mineral surface in an aqueous media is very important in natural environment and metallurgical processing. X-ray photoelectron spectroscopy (XPS) has been used as an ex-situ analytical technique, but the material to be analyzed can be any size from $100\;{\mu}m$ up to about 1 cm. It can also measure mixed solids powders, but it is impossible to ascertain the original source of resulting x-ray signals where they were emitted from, since it radiates and scans the macro sample surface area. The study demonstrated the ability of TOF-SIMS to detect individual organic species on the surfaces of mineral particles from plant samples and showed that the TOF-SIMS techniques provides an excellent tool for establishing the surface compositions of mineral grains and relative concentrations of chemicals on mineral species.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.201-201
• /
• 1999

소수성의 특성을 가지는^g , pp (polypropylene)의 표면을 이온 보조 반응법(IAR)으로 처리하여 친수성으로 개질하였다. 이온빔 보조 반응법은 고에너지 이온빔을 이용한 기존의 표면처리 방식과는 달리 1keV 영역의 에너지를 가진 이온빔을 조사하면서 시료 주위에 반응성 가스를 불어넣어 줌으로써 표면의 성질을 변화시키는 방법이다. 여기서 조사된 수소이온의 에너지는 0.6에서 1.0keV까지 변화시키고 시료의 주변에 불어주는 산소의 양은 0에서 8ml/min으로 변화시켰으며 이온 조사량은 5x1014에서 1x1017ions/$\textrm{cm}^2$까지 변화시켰다. 그 결과 처리하지 않은 시료의 접촉각은 93$^{\circ}$이었으며 이온조사량이 1x1017ions/$\textrm{cm}^2$이고 가속에너지가 1.0keV인 조건에서 수소 이온빔만으로 처리한 시편의 경우 접촉각은 60$^{\circ}$정도 였으나 수소이온보조 반응법으로 처리한 시편의 경우는 $10^{\circ}$이하까지 접촉각이 감소하였음을 알 수 있었다. 이는 표면처리에 따른 표면의 친수성 작용기의 형성을 예상할 수 있으며 그 존잴르 확인하기 위하여 대기중과 물속에서 각각 보관한 시료의 접촉각과 표면에너지를 계산하여보았다. 그 결과 대기중에서 방치한 시편의 경우40$^{\circ}$ 정도로 감소하였으나 증류수에 보관한 시료의 경우는 15$^{\circ}$정도의 변화를 보였다. 물과 Formamide의 접촉각의 측정으로 표면에너지를 계산한 결과 산소분위기에서 수소이온빔으로 처리된 시료는 23dyne/cm에서 64dyne/cm이상까지 변화함을 관찰하였다. 위의 결과들이 표면거칠기에 미치는 영향을 고찰하기 위해 처리되지 않은^g , pp 의 근(root mean square)값은 8.30nm이었고 1kevdpsj지에서 불어준 산소4ml/min이고 이온 조사량이 1x1017ions/$\textrm{cm}^2$인 경우 접촉각은 $10^{\circ}$를 나타냈으며 rms값은 20.8nm를 나타내었다. XPS (X-ray photoelectron spectroscopy) 분석을 통하여 1x1017ions/$\textrm{cm}^2$에서 산소기체를 4ml/min 불어넣어준 후 C-O, C=O, (C=O)-O등의 친수성 작용기가 형성되었음을 확인하였다.^g , pp 의 접착력을 알아보기 위해 유성 페인트를 전도성 고분자위에 후막 처리하였다. 스카치 테이프를 테스트를 통하여 이온 보조 반응법으로 처리된^g , pp 표면이 처리하지 않은 시편에 비하여 접착력 향상되었음을 확인하였다.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.62-73
• /
• 2014

This research was focused to apply response surface methodology for optimization of bio-methane production by biogas upgrading process. Methane concentration(Y1) and methane efficiency(Y2) on biogas upgrading process were mathematically described as being modeled by the use of the Box-Behnken design on response surface methodology. The results of ANOVA(analysis of variance) about models, the probability value of the methane concentration and methane recovery response surface model are 0.0001 and 0.0001, respectively and coefficient of determination($R^2$) are 0.9788 and 0.9710, respectively. The response surface model is proved of high reliability and suitability. The operation pressure had the greatest influence to methane concentration than other operation parameters and the PSA rotary valve velocity had the greatest influence to methane recovery than other operation parameters. Optimal condition of biogas upgrading process for production of $100Nm^3/hr$ bio-methane were operation pressure 8.0bar and outlet flow rate 31.55RPM, respectively. At that operation condition the methane concentration of bio-methane was 97.13% and methane recovery in biogas upgrading process was 75.89%.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.4
• /
• pp.375-383
• /
• 2023

Malic acid-catalyzed transformation has been developed to produce ginsenoside Rg3 which is increasingly in demand as a functional ingredient. The optimization of the conversion of red ginseng saponin (RGS) to ginsenoside Rg3 by acid catalyzed transformation was carried out using Box-Behnken design (BBD) based on Response Surface Analysis (RSM). The main independent variables were malic acid concentration, temperature, and reaction time. Conversion of ginsenoside Rg3 was performed according to BBD model and optimization conditions were analyzed. The concentration of the converted ginsenoside Rg3 ranged from 1.548 mg/L to 4.558 mg/L, and the highest production was obtained under the condition of reacting 1% malic acid, 50 ℃ and 9h. Consequently, The independent variables affecting the production of ginsenoside Rg3 were identified in the following order: malic acid concentration, reaction time and temperature. In addition, it was confirmed that the interaction between malic acid concentration and reaction time had a greater influence than the temperature.

• Proceedings of the Korean Society of Food and Cookery Science Conference
• /
• 2005.10a
• /
• pp.87-87
• /
• 2005

• Journal of the military operations research society of Korea
• /
• v.33 no.1
• /
• pp.59-74
• /
• 2007

Computer simulation models are in general quite complex and time-consuming to run, and therefore, a simpler meta-model is usually constructed for further analysis. In this paper, JANUS, a war-game simulator, is used to describe a certain tank combat situation. Then, second-order response surface and artificial neural network meta-models are developed using the data from eight different experimental designs. Relative performances of the developed meta-models are compared in terms of the mean squared error of prediction. Computational results indicate that, for the given problem, the second-order response surface meta-model generally performs better than the neural network, and the orthogonal array-based Latin hypercube design(LHD) or LHD using maximin distance criterion may be recommended.

• Proceedings of the EASDL Conference
• /
• 2003.09a
• /
• pp.89-89
• /
• 2003

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.1
• /
• pp.39-44
• /
• 2006

Ultra precision positioning mechanism has been widely used on semiconductor manufacturing equipments, optical spectrum analyzers and cell manipulations. Ultra precision positioning mechanism consists of several actuators, sensors, guides and control systems. Its efficiency depends on each performance of components. The object of this study is to design and analyze the micro stage that is one of the equipments embodied in ultra precision positioning mechanism. The micro stage consists of PZT actuators and flexure hinges. The structural design of flexure hinge is optimized by using RSM and FEM. The control factors concerned with the design of flexure hinges of stage and arms are optimized by minimizing the equivalent stress on the hinge and maximizing 1st natural frequency based on RSM and FEM simulation under various kinds of design conditions.