• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.70-76
• /
• 2006

The aim of this study was comparison of effectiveness of surface treatment methods in reducing the oxygen-inhibited layer of a commercially available freshly polymerized, light cured dental sealant($concise^{TM}$, 3M, St Paul, USA). Surface treatment groups were consisted of no treatment(negative control group) and 3 experimental groups according to surface treatment of light-cured sealant. Experimental group I was 10 seconds' exposure to distilled water syringe, group II was 10 seconds' manual application using a cotton pellet wetted with 75% alcohol and group III was 10 seconds' prophylaxis with pumice/water slurry using rubber cup on a slow-speed handpiece. All specimens were immersed in 5ml distilled water and stored at 37c water bath for 10 minutes. All eluates were analyzed by HLPC for identification and quantitive analysis of monomers. The results of this study can be summarized as follows. 1. None of the chromatograms of the tested sealant displayed peaks with the same retention time as that of the standard solution, except for TEGDMA. 2. All surface treatment group had a statistically significant decrease of monomer release in comparison with no treatment group. 3. Removal effects of unreacted monomer in group III was statistically significant in comparison with group I and group II. These results revealed that mechanical method using pumice and rubber cup is the most effective in removing residual monomer and may be valuable to be used effectively in clinic.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.292-294
• /
• 2005

본 연구에서는 전기영동 겔에 대한 음극전리수의 침투력과 녹차성분에 대한 음극전리수의 용해력을 일반 물과 서로 비교하였다. 음극전리수와 증류수로 제조한 CBB-R 염색시약으로 polyacrylamide 겔 상에서 단백질을 다양한 시간 동안 염색한 후 염색강도를 서로 비교하였다. 그 결과 음극전리수로 제조한 CBB-R 염색시약은 증류수로 제조한 CBB-R 염색시약보다 같은 반응 시간 동안에 먼저 단백질을 강하게 염색시켰다. 뿐만 아니라 $25^{\circ}C$에서 음극전리수는 일반 물에 비하여 녹차성분에 대해 극히 탁월한 용해력을 나타내었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.175.2-175.2
• /
• 2011

바이오디젤의 국가별 의무 사용 정책 확대로 인해 원료유 가격이 상승하고 있으며 원료유가 부족한 상황으로 다양한 원료를 찾는 연구가 진행되고 있다. 육상 유지 작물보다 단위면적당 생산성이 매우 높은 미세조류는 제3세대 바이오매스로 주목받고 있으며 산업체 배출 이산화탄소를 이용해 작은 면적에서 배양할 수 있는 장점이 있다. 미세조류로부터 바이오디젤 생산은 먼저 오일 함량이 높은 미세조류 종의 선정과 배양 및 수확 후 효율적인 방법으로 바이오디젤 원료유를 추출하는 과정이 중요하다. 본 연구는 Microwave로 전처리된 미세조류로 부터 원료유를 추출하여, 인지질, 단백질, 엽록소 등의 반응저해 물질을 일부 감소시키고 추출수율을 높였지만, 산가가 80이상으로 높게 추출되고 추출된 오일이 높은 점성을 가지는 문제가 있다. 이로 인해 전이에스테르화 반응의 진행이 불가하였으며 이러한 문제를 해결하기 위해, 에스테르화 반응에 용매를 혼합하여 반응성을 개선하고자 하였다. 추가된 보조 용매는 오일과 쉽게 혼합되어 반응물의 점성을 낮추고, 반응 완료후, 물에 쉽게 용해되는 불순물, 미 반응물, 촉매 등의 분리 및 제거를 용이하게 하는 장점이 있다. 또한 오일과 비교하여 낮은 끓는점을 갖는 용매는 증류를 통해 쉽게 제거가 가능하다. 반응이 완료된 오일은 초기산가 80에서 10이하의 감소를 나타내 용매 혼합 에스테르화의 효율적인 부분을 확인하였다.

• Economic and Environmental Geology
• /
• v.50 no.4
• /
• pp.257-266
• /
• 2017

Batch experiments were performed to develop the method for the pH reduction of recycled aggregate by using $scCO_2$ (supercritical $CO_2$), maintaining the pH of extraction water below 9.8. Three different aggregate types from a domestic company were used for the $scCO_2$-water-recycled aggregate reaction to investigate the low pH maintenance of aggregate during the reaction. Thirty five gram of recycled aggregate sample was mixed with 70 mL of distilled water in a Teflon beaker, which was fixed in a high pressurized stainless steel cell (150 mL of capacity). The inside of the cell was pressurized to 100 bar and each cell was located in an oven at $50^{\circ}C$ for 50 days and the pH and ion concentrations of water in the cell were measured at a different reaction time interval. The XRD and SEM-EDS analyses for the aggregate before and after the reaction were performed to identify the mineralogical change during the reaction. The extraction experiment for the aggregate was also conducted to investigate the pH change of extracted water by the $scCO_2$ treatment. The pH of the recycled aggregate without the $scCO_2$ treatment maintained over 12, but its pH dramatically decreased to below 7 after 1 hour reaction and maintained below 8 for 50 day reaction. Concentration of $Ca^{2+}$, $Si^{4+}$, $Mg^{2+}$ and $Na^+$ increased in water due to the $scCO_2$-water-recycled aggregate reaction and lots of secondary precipitates such as calcite, amorphous silicate, and hydroxide minerals were found by XRD and SEM-EDS analyses. The pH of extracted water from the recycled aggregates without the $scCO_2$ treatment maintained over 12, but the pH of extracted water with the $scCO_2$ treatment kept below 9 of pH for both of 50 day and 1 day treatment, suggesting that the recycled aggregate with the $scCO_2$ treatment can be reused in real construction sites.

• Journal of the Microelectronics and Packaging Society
• /
• v.3 no.1
• /
• pp.11-24
• /
• 1996

부분압이 다른 여러 가지 반응성 가스분위기하에서 이른곤 이온을 이용하여 PC, PET PMMA 그리고 PTFE 폴리머 표면의 삼차 증류수에대한 진수성을 증대하였다. 폴리머 표면의 친수성의 변화는 여러 가지 반응성 가스 분위기하에서 아르곤 이온의 조사량을 1014 부터 1x1017cm2까지 변화하면서 조사하였다. 접촉감은 아르곤 이온이 조사되는 폴리머 표면 근처에 유입된 가스의 방응성(O2>N2>H2)에 따라 많이 감소하였다, 폴리머 표면에 형성된 친수성기는 XPS Cls, Ols, 그리고 Nls 스펙트럼을 분석하여 확인하였다. 표면 개질된 PC와 PTFE에 대한 Al 금속의 접착력 증대를 Scotch tape와 인장실험을 통하여 확인하였다. 접착 력 증가는 표면 에너지 중 polar force의 증가에 의한 것으로 입증되었다. 에너지를 가진 아 르곤 입자 폴리머 체인 그리고 반응성 가스 사이의 반응기구는 2단계 모델로 설명가능하였 는데 그 기구는 첫 번째 이온의 조사에 의한 불안정한 폴리머 체인의 형성과 두 번째 단계 로 이렇게 형성된 폴리머 체인과 반응성 가스들 사이의 화학반응으로 이루어진다. 질화아루 미늄의 표면을 산소분위기하에서 아르곤 빔을 조사하여 표면개질한후 AlON층이 새롭게 형 성된 것을 XPS를 이용하여 확인할수 있었다. 개질된 질화알루미늄과 구리금속 박막간의 접 착력을 scratch 실험을 통하여 조사하였다.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.2 s.48
• /
• pp.123-128
• /
• 2006

Beidellite, a member of the dioctahedral smectite group, was synthesized hydrothermally from dickite. Organophilic [DEACOOH]-beidellite intercalation complex was formed by the cation exchange reaction between synthetic Na-beidellite and [DEACOOH]Br. The products dried in high vacuum were treated with various organic solvent such as methanol, ethanol, acetone, ether, acetonitrile and caprolactam in order to determine the swelling behaviour of the prepared complexes. After drying under high vacuum, basal spacing of [DEACOOH]-beidellite shows 15.1 ${\AA}$, and it changed to 19.4, 29.9, 15.9, 16.8, 14.8, 26.5 and 14.8 ${\AA}$ under distilled water, methanol, ethanol, acetone, ether, acetonitrile and caporlactam, respectively. Especially, the characteristics of the intercalation complexes and their swelling behavior of the synthetic beidellite and natural montmorillonite were compared.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.2
• /
• pp.117-122
• /
• 2012

The leaching of Li from fly ashes was studied. The fly ash produced from the Taean electric power plant of the Korea Western Power Co., Ltd. was used for this study. The Li leaching was observed according to the changes in solid:solution ratio, solution types (seawater or deionized water), and the $CO_2$ condition in the atmosphere. The results showed that the Li concentrations in the solution increased continuously as the solid:solution ratio increased. The Li leaching per unit mass of fly ash was greater when the deionized water was used for the experiment and when the $CO_2$ dissolution is limited during the reaction because the precipitation of $CaCO_3$ is suppressed under those conditions. At high solid:solution ratio, $Mg^{2+}$, the ion preventing the Li extraction from seawater by adsorption, was effectively removed from the seawater.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.6
• /
• pp.247-257
• /
• 2021

This study was started to investigate why autoclave curing (AC) specimen showed an improvement in compressive strength after immersion in water for a long time, although AC specimen did not showed a high initial compressive strength unlike our expectations. Distilled water and alkaline solutions were used for immersion and three different curing methods were engaged. It was expected that the compressive strength would be improved after immersion in alkaline solutions; however, there was little difference in compressive strength after 21 day immersion because both new crystallites produced by additional geopolymerization and expansion caused by the alkaline aggregate reaction may prevent the additional improvement in compressive strength. It was concluded that in order to secure the long-term commonality and underwater stability of the geopolymers, it is desirable aging geopolymers while immersing it underwater for more than 21 days after curing using an autoclave.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.874-877
• /
• 2009

본 연구에서는 수용액 내의 오염물질 분해를 위하여 개발한 광촉매가 코팅된 실리카 비드의 광분 해반응 사용에 따른 활성저하 문제를 해결하기 위하여 반응에 사용한 비드의 활성을 향상시킬 수 있는 재생 방법에 관한 실험을 수행하였다. 비드의 재생방법으로 표면 세정법을 선택하였으며, 세정액으로는 물(증류수), 계면활성제, 아세톤 등 세정력이 서로 다른 3종의 용액을 사용하였다. 재생 과정은 서로 다른 3종의 세정액으로 반응에 사용하여 활성이 떨어진 비드를 세정한 후, 소성온도를 $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$로 달리하여 30분간 처리하였다. 재생 처리과정은 각 1~3회 반복 수행하였으며, 서로 다른 조건에서 재생된 비드의 활성은 수용액 내의 methylene blue 광분해율로 측정하였다. 연구결과, 재생한 비드의 활성은 아세톤으로 세정한 후, $100^{\circ}C$에서 30분간 소성하였을 때 가장 우수한 것으로 나타났으며, 이러한 기초 연구결과를 토대로 현재보다 효율적인 재생 기술에 관한 연구를 수행 중에 있다.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.48-54
• /
• 2020

Sulphuric acid (H₂SO₄) leaching and hydrolysis were experimented for the recovery of titanum dioxide (TiO₂) from the water-leached residue followed by soda-roasting spent SCR catalysts. Sulphuric acid leaching of Ti was carried out with leachate concentration (4~8 M) and the others were fixed (temp.: 70 ℃, leaching time: 3 hrs, slurry density: 100 g/L, stirring speed: 500 rpm). For recovering of Ti from the leaching solution, hydrolysis precipitation was conducted at 100 ℃ for 2 hours in various mixing ratio (leached solution:distilled water) of 1:9 to 5:5. The maximum leachability was reached to 95.2 % in 6 M H₂SO₄ leachate. on the other hand, the leachability of Si decreased dramatically 91.7 to 3.0 % with an increase of H₂SO₄ concentration. Hydrolysis precipitation of Ti was proceeded with leaching solution of 8 M H₂SO₄ with the lowest content of Si. The yield of precipitation increased proportionally with a dilution ratio of leaching solution. Moreover, it increased generally by adding 0.2 g TiO₂ as a precipitation seed to the diluted leaching solution. Ultimately, 99.8 % of TiO₂ can be recovered with the purity of 99.46 % from the 1:9 diluted solution.