• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.22-22
• /
• 2010

최근 염료감응형 태양전지(DSSC)는 광변환효율 측면에서 향상 가능성이 높으며, 전기화학적 반응을 바탕으로 하므로 생산단가가 낮아 차세대 태양전지로 관심을 모우고 있다. 염료감응형 태양전지에 있어서 주요 구성성분 중의 하나는 다공성 산화물 광전극 재료이다. 다양한 반도체 물질과 비교할 때 $TiO_2$는 전도대의 위치와 전자이동성 면에서 비교적 적합하며, 유기물과의 흡착성 및 안정성 측면에서 대단히 우수하다. 염료감응형 태양전지의 $TiO_2$ 광전극이 갖추어야 할 요건은 표면적이 넓어서 염료 흡착량이 많아야 하며, 전자전달 및 전해질 이동을 위한 효율적 구조이어야 한다. $TiO_2$ 광전극 제작을 위한 재료로서는 나노입자가 널리 이용되며, 입자의 크기는 20 nm 부근이 적합한 것으로 알려져 있다. 본 발표에서는 나노입자 외에 나노막대, 나노섬유, 나노튜브, inverse-opal 구조 등과 같이 지금까지 연구되고 있는 $TiO_2$ 나노구조 관련연구를 소개 한다. 한편으로 효율적 전극구조를 제작하려면 $TiO_2$ 나노구조 제어 외에도, 투명전극과 $TiO_2$ 전극과의 계면층(interfacial layer) 제어, 빛의 효율적 이용을 위한 산란층(scattering layer) 및 $TiO_2$ 전극에서 전해질로의 전자손실 억제를 위한 blocking layer 도입 등이 필요하다. 이에 대한 기본개념을 설명하고 다른 연구자의 연구결과를 소개한다. 본 연구실의 연구 결과인, 메조 포러스 구조, 다공성 속빈구 구조와 구형구조체를 합성하고 이를 염료감응형 태양전지에 응용한 내용을 소개한다. 다공성 속빈구의 경우, 산란층으로 대단히 우수한 결과를 나타내었고, 다공성 구형구조체는 광전극 주재료로 적합한 특성을 나타내었다. 즉, 다공성 구형구조체를 적용한 광전극은 표면적이 대단히 넓고 또한 효율적 동공구조가 형성되어 전해질 이동에도 매우 효율적이다.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.463-467
• /
• 2003

Fundamental experiments were carried out about color removal efficiency of dyeing wastewater using a $bioreactor-TiO_2/UV$ reactor system. Color removal efficiencies of the Reactive Black 5 in the system were found to bo more than 80% in changes of dilution rate 0.04 to $0.08hr^{-1}$. In this research, a new color removal system of dying wastewater will be proposed after more investigation of decolorization efficiencies about different dyes and condition.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.151-158
• /
• 2022

In this paper, parameter characteristics such as pH effect, isotherm, kinetic and thermodynamic parameters and competitive adsorption of dyes including malachite green (MG), direct red 81 (DR 81) and thioflavin S (TS), which have different functional groups, being adsorbed onto activated carbon were investigated. Langmuir, Freundlich and Temkin isotherm models were employed to find the adsorption mechanism. Effectiveness of adsorption treatment of three dyes by activated carbon were confirmed by the Langmuir dimensionless separation factor. The mechanism was found to be a physical adsorption which can be verified through the adsorption heat calculated by Temkin equation. The adsorption kinetics followed the pseudo second order and the rate limiting step was intra-particle diffusion. The positive enthalpy and entropy changes showed an endothermic reaction and increased disorder via adsorption at the S-L interface, respectively. For each dye molecule, negative Gibbs free energy increased with the temperature, which means that the process is spontaneous. In the binary component system, it was found that the same functional groups of the dye could interfere with the mutual adsorption, and different functional groups did not significantly affect the adsorption. In the ternary component system, the adsorption for MG lowered a bit, likely to be disturbed by the other dyes meanwhile DR 81 and TS were to be positively affected by the presence of MG, thus resulting in much higher adsorption.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.544-550
• /
• 2013

This work investigated the environmental application of an underwater dielectric barrier discharge plasma reactor consisting of a porous hydrophobic ceramic tube to the decolorization of an azo dyeing wastewater. The reactive species generated by the plasma are mostly short-lived, which also need to be transferred to the wastewater right after the formation. Moreover, the gas-liquid interfacial area should be as large as possible to increase the decolorization rate. The arrangement of the present wastewater treatment system capable of immediately dispersing the plasmatic gas as tiny bubbles makes it possible to effectively decolorize the dyeing wastewater alongside consuming less amount of electrical energy. The effect of discharge power, gas flow rate, dissolved anion and initial dye concentration on the decolorization was examined with dry air for the creation of plasma and amaranth as an azo dye. At a gas flow rate of $1.5Lmin^{-1}$, the good contact between the plasmatic gas and the wastewater was achieved, resulting in rapid decolorization. For an initial dye concentration of $40.2{\mu}molL^{-1}$ (volume : 0.8 L; discharge power : 3.37 W), it took about 25 min to attain a decolorization efficiency of above 99%. Besides, the decolorization rate increased with decreasing the initial dye concentration or increasing the discharge power. The presence of chlorine anion appeared to slightly enhance the decolorization rate, whereas the effect of dissolved nitrate anion was negligible.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.100-101
• /
• 2008

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2006.11a
• /
• pp.122-124
• /
• 2006

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2004.04a
• /
• pp.204-206
• /
• 2004

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2004.04a
• /
• pp.57-59
• /
• 2004

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.11a
• /
• pp.65-66
• /
• 2009

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2007.11a
• /
• pp.121-122
• /
• 2007