• Journal of Hydrogen and New Energy
• /
• v.31 no.4
• /
• pp.395-403
• /
• 2020

In this paper, the performance characteristics of the impeller and volute in the 2 vane pump were investigated using response surface method (RSM) with commercial computation fluid dynamics (CFD) code. Design variables were defined with the impeller blade angle and volute area distribution. The objective functions were defined as the total head, total efficiency and solid material size of the 2 vane pump. The design optimization of the design variables was determined using the RSM. The numerical results for the reference and optimum models were compared and discussed in this work.

• Journal of Educational Research in Mathematics
• /
• v.11 no.1
• /
• pp.123-136
• /
• 2001

우리나라 중학교 2학년 학생들은 제3차 수학.과학 국제비교연구인 TIMSS와 그 반복연구인 TIMSS-R의 수학 검사에서 최상위권의 성취 수준을 보임으로써 국내외 연구자들의 관심의 초점이 되어 왔다. 이 논문은 우선 우리나라 학생들이 높은 성취 수준을 기록할 수 있는 원인을 $\circled1$ 체계적인 수 세기 방식, $\circled2$ 상급 학교 진학을 위한 시험의 대비, $\circled3$ 수학 교사 의 능력, $\circled4$ 교육과정과 검사와의 관련성, $\circled5$ 검사에 대한 태도라는 다섯 가지 측면에서 탐색하였다. 또한 높은 성취 수준 이면에 드리워진 부정 적인 측면을 조망하여 $\circled1$ 공학적 도구 의 이용에 대한 소극성, $\circled2$ 실생활 관련 문장제에 대한 저조한 성취 수준, $\circled3$ 지역에 따른 성취 수준의 차이, $\circled4$ 수학에 대한 부정적인 태도의 네 가지로 요약하였다. 또한 TIMSS-R 의 수학 성취 수준에 대한 성별 차이를 $\circled1$ 친숙함/생소함, $\circled2$ 대수/기하, $\circled3$ 자유반응형/선택형이라는 세 가지 측면에서 분석하였다. 마지막으로 국제비교 연구의 결과는 국가별 평균성취 수준의 양적인 비교에 초점을 두기보다는, 성취도 이면에 깔린 다양한 요소에 대한 복합적인 고려와 깊이 있는 분석을 통해 수학교육의 현 상태를 점검하는 하나의 잣대로 이용해야 한다는 점을 지적하였다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.65-71
• /
• 2006

This paper presents the robust design of gripper part for a high-speed LCD(Liquid Crystal Display) transfer system. In this paper, the $1^{st}$ DOE(Design of Experiment) is conducted to find out main-effect factors for the design of gripper part. Thirty-six analysis are performed using $ANSYS^{(R)}$ and their results are statistically analyzed using $MINITAB^{(R)}$, which shows that the factors, i.e., First-width, Second-width, Rec-width, and thickness of gripper part, are more important than other factors. The main effect plots shows that the maximum deflection and mass of gripper part are minimized by increasing First-width, Second-width, Rec-width and thickness. The $2^{nd}$ DOE is conducted to obtain RSM(Response Surface Method) equation. The CCD(Central Composite Design) technique with four factors is used. Optimum design is conducted using the RSM equation. Genetic algorithm is used for optimal design. Six sigma robust design is conducted to find out a guideline for control range of design parameter. To obtain six sigma level quality, the standard deviations of design parameters are shown to be controlled within 5% of average design value.

• Design & Manufacturing
• /
• v.8 no.2
• /
• pp.46-49
• /
• 2014

Silicone is recently used for LED chip lense due to its good thermal stability and optical transmittance. In order to predict residual stress which causes optical briefringence and mechanical warpage of silicone, finite element analysis was conducted for curing process during silicone molding. For analysis of curing process, a dynamic cure kinetics model was derived based on the differential scanning calorimetry(DSC) test and applied to the material properties for finite element analysis. Finite element simulation result showed that the slow cure reduced abrupt reaction heat and it was predicted decrease of the residual stress.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.1
• /
• pp.33-42
• /
• 2002

Copolymerization of ${\alpha}$-Methylstyrene(AMS) with Acrylonitrile(AN) was carried out with benzoylperoxide(BPO) as an initiator in toluene at $80^{\circ}C$ in a continuous stirred tank reactor. Reaction volume and residence time were 0.6 liters and 3 hours, respectively. The monomer reactivity ratios, $r_{AMS}$ and $r_{AN}$ determined by both the Kele$T{\"{u}}d\"{o}s$ method and the Fineman-Ross method were $r_{AMS}$=0.16(0.14), $r_{AN}$=0.04(0.06). The cross-termination factor ${\Phi}$ of the copolymer over the entire AMS composition ranged from 0.75 to 0.92. The ${\Phi}$ factors of poly(AMS-co-AN) were increased with increasing AMS content. The simulated conversions and copolymerization rates were compared with the experimental results. It was observed that the average time to reach dynamic steady-state was three times the residence time.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.1
• /
• pp.29-38
• /
• 2003

To develope chemical heat pump using available energy sources, solar heat and other kinds of waste thermal energy, we have studied the material and heat transfer rate in the cylindrical bed reactor packed with Calcined Dolomite. Our results from the studies are as follows ; 1 The time needed to complete dehydration reaction at the wall side of the cylindrical reactor(r/rL=0.5) was shorter than that of the center(r/rL=0.0) as much as 12%. 2. Two dimensional (radial and circumferential) partial differential equations, concerning heat and mass transfer rate in the packed bed of calcined Dolomite, are solved numerically to describe the characteristics of the reaction in the cylindrical reactor. The solution reads rate of reaction in the packed bed reactor depends on the temperature and concentration of reactants. These results read the supplied heat transfers from the wall side of the cylinder to the center, dehydration reaction begins at the inner side of the wall of the cylindrical reactor and the dehydration reaction proceeds from the wall side to center of cylinder.

• Journal of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.179-187
• /
• 1982

The copolymerization of N-acryloylpyrrolidone and acrylonitrile was performed in N,N'-dimethylformamide at 50$^{\circ}$C and monomer reactivity ratio was obtained by using IR working curve and Fineman and Ross equation. ($r_1$ = 0.43, $r_2$ = 1.56) It is found that resulting copolymer is good polymeric initiator for anionic graft copolymerization of 2-pyrrolidone. Graft copolymers with polybutylamide (nylon-4) grafts onto poly(NAP-Co-AN) backbone were synthesized and the various effects on the graft copolymerization of 2-pyrrolidone were examined. The rate constants ($K_p$) of graft anionic polymerization at 40 and 50$^{\circ}$C were 2.82${\times}$10 and 2.93${\times}$10(l/mole, min), respectively.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.5
• /
• pp.15-21
• /
• 2015

The thermal decomposition characteristics of the ZPP(Zirconium/Potassium perchlorate), widely used as a primary charge of initiators, were investigated by differential scanning calorimetry(DSC). The DSC results with different heating rates were elaborated with AKTS-Thermokinetics software for the determination of the kinetic parameters of the thermal decomposition of ZPP. There was good agreement between the experimental and the simulation curves, based on the determined kinetic parameters, which indicates the validity of the kinetic description of the thermal decomposition process of ZPP.

• Korean Journal of Crystallography
• /
• v.12 no.4
• /
• pp.212-215
• /
• 2001

The hydrothermal reaction between manganese nitrate (Mn(NO₃)₂·H₂O ) and midzole-4,5-dicarboxylic acid(IDCH₂) in the presence of sodium acetate (NaOAC·3H₂O) gave a two-dimensional manganese-imidazoledicarboxylate coordination polymer with an empirical formula of [Mn(IDC)(H₂O)](1) Compound 1 was characterized by spectroscopy (IR) and X-ray diffraction. Crystal-lographic date for 1: orthorhombic space group, Pbca, a=7.257(5) Å b=13.687(5)Å, c=14.332(6)Å Z=8, R(wR₂)=0.0498(0.0999).

• Korean Journal of Crystallography
• /
• v.12 no.3
• /
• pp.137-140
• /
• 2001

Compound PdCl₂(Phc≡N)₂(1) reacted with 2,6-diisopropylaniline to give trans-[Pd(NH₂-C/sub 6/-H₃-2, 6-i-Pr₂)₂Cl₂] (2). Compound 2 was characterized by spectroscopy (¹H-NMR, /sup 13/C-NMR, and IR) and X-ray diffraction. Crystallographic data for 2: monoclinic space group P2₁/n, a=13.532(3) Å, b=5.749(1) Å, c=17.880(4)Å, β=103.84(2)°, Z=2, R(wR₂)=0.0466(0.1226).