DOI QR코드

DOI QR Code

Thermal Decomposition Kinetics of ZPP as a Primary Charge of Initiators

착화기용 ZPP의 열분해 특성

  • Kim, Junhyung (The 4th R&D Institute-1st Directorate, Agency for Defense Development) ;
  • Seo, Taeseok (The 4th R&D Institute-1st Directorate, Agency for Defense Development) ;
  • Ko, Seungwon (The 4th R&D Institute-1st Directorate, Agency for Defense Development) ;
  • Ryu, Byungtae (The 4th R&D Institute-1st Directorate, Agency for Defense Development)
  • Received : 2015.06.01
  • Accepted : 2015.09.08
  • Published : 2015.10.01

Abstract

The thermal decomposition characteristics of the ZPP(Zirconium/Potassium perchlorate), widely used as a primary charge of initiators, were investigated by differential scanning calorimetry(DSC). The DSC results with different heating rates were elaborated with AKTS-Thermokinetics software for the determination of the kinetic parameters of the thermal decomposition of ZPP. There was good agreement between the experimental and the simulation curves, based on the determined kinetic parameters, which indicates the validity of the kinetic description of the thermal decomposition process of ZPP.

착화기의 1차 점화장약으로 널리 사용되어지고 있는 ZPP(Zirconium/Potassium perchlorate)의 열분해 특성을 differential scanning calorimetry(DSC)를 사용하여 평가하였다. ZPP의 열분해반응에 대한 속도론적 파라미터를 결정하기 위하여, 다른 가열 속도를 갖고 수행된 DSC 결과들을 AKTS사의 Thermokinetics software를 사용하여 분석하였다. 결정된 속도론적 파라미터를 사용하여 계산된 모사값들은 실험적 결과들과 잘 일치함으로써, ZPP의 열분해과정에 대한 속도론적 모사의 유효성을 검증할 수 있었다.

Keywords

References

  1. Jackson, C.H., "Zirconium Composition with Potassium Perchlorate and Graphite," US Patent No. 3291665, Dec. 1966.
  2. Lee, J.S. and Hsu, C.K., "The Effect of Different Zirconium on Thermal Behaviors for Zr/KClO4 Priming Composition," Thermochimica Acta, Vol. 367-368, pp. 375-379, 2001. https://doi.org/10.1016/S0040-6031(00)00688-2
  3. Freeman, E. S., Hogan, V.D. and Anderson, D.A., "Effects of Changes in Chemical Reactivity and Decomposition Characteristics of Potassium Perchlorate on the Thermal Ignition of Magnesium - Potassium Perchlorate Mixtures," Combustion and Flame, Vol. 9, Issue 1, pp. 19-23, 1965. https://doi.org/10.1016/0010-2180(65)90004-0
  4. Pourmortazavi, S.M., Fathollahi, M., Hajimirsadeghi, S.S. and Hosseini, S.G., "Thermal Behavior of Aluminum Powder and Potassium Perchlorate Mixtures by DTA and TG," Thermochimica Acta, Vol. 443, Issue 1, pp. 129-131, 2006. https://doi.org/10.1016/j.tca.2005.11.045
  5. Criado, J.M., Malek, J. and Ortega, A., "Applicability of the Master Plots in Kinetic Analysis of Non-Isothermal Data," Thermochimica Acta, Vol. 147, Issue 2, pp. 377-385, 1989. https://doi.org/10.1016/0040-6031(89)85192-5
  6. Roduit, B., Xia, L., Folly, P., Berger, B., Mathieu, J., Sarbach, A., Andres, H., Ramin, M., Voelsanger, B., Spitzer, D., Moulard, H. and Dilhan, D., "The Simulation of the Thermal Behavior of Energetic Materials based on DSC and HFC Signals," Journal of Thermal Analysis and Calorimetry, Vol. 93, No. 1, pp. 143-152, 2008. https://doi.org/10.1007/s10973-007-8864-3
  7. Friedman, H.L., "Kinetics of Thermal Degradation of Char-forming Plastics from Thermogravimetry. Application to a Phenolic Plastic," Journal of Polymer Science Part C: Polymer Symposia, Vol. 6, Issue 1, pp. 183-195, 1964. https://doi.org/10.1002/polc.5070060121
  8. Roduit, B., Dermaut, W., Lunghi, A., Folly, P., Berger, B. and Sarbach, A., "Advanced Kinetics-Based Simulation of Time to Maximum Rate under Adiabatic Conditions," Journal of Thermal Analysis and Calorimetry, Vol. 93, No. 1, pp. 163-173, 2008. https://doi.org/10.1007/s10973-007-8866-1
  9. AKTS, "AKTS-Thermokinetics," World Wide Web location http://www.akts.com/, Sep. 2015.
  10. Gordon, S. and MaBride, B.J., "Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications," NASA RP-1311, 1994.
  11. Friedman, R., A History of Jet Propulsion, Including Rockets, Xlibris Corporation, Bloomington, Ind., U.S.A., 2010.
  12. Berger, B., "Characterization of the Zirconium/Potassium Perchlorate/Nitrocellulose Pyrotechnic System by Simultaneous Thermogravimetry- Differential Thermal Analysis - Mass Spectrometry," Propellants Explosives Pyrotechnics., Vol. 20, Issue 5, pp. 266-272, 1995. https://doi.org/10.1002/prep.19950200508
  13. Lee, J.S., Hsu, C.K. and Jaw, K.S., "The Thermal Properties of $KClO_4$ with Different Particle Size," Thermochimica Acta, Vol. 367-368, pp. 381-385, 2001. https://doi.org/10.1016/S0040-6031(00)00691-2
  14. Kang, X., Zhang, J., Zhang, Q., Du, K. and Tang, Y., "Studies on Ignition and Afterburning Process of KClO4/Mg Pyrotechnics Heated in Air," Journal of Thermal Analysis and Calorimetry, Vol. 109, Issue 3, pp. 1333-1340, 2012. https://doi.org/10.1007/s10973-011-1991-x
  15. Pourmortazavi, S.M., Hosseini, S.G., Hajimirsadeghi, S.S. and Alamdari, R.F., "Investigation on Thermal Analysis of Binary Zirconium/Oxidant Pyrotechnic Systems," Combustion Science and Technology, Vol. 180, Issue 12, pp. 2093-2102, 2008. https://doi.org/10.1080/00102200802466014
  16. Yang, L.C., "Effects of Fuel Particle Size and Impurity on Solid-to-Solid Pyrotechnic Reaction Rate", 47th AIAA/ASME /SAE/ASEE Joint Propulsion Conference & Exhibit, San Diego, C.A., U.S.A., AIAA 2011-5581, Aug. 2011.
  17. Durgapa, U.C., Dizit, A.S. and Sarawaderkar, R.G., "Study of Zirconium-Potassium Perchlorate Pyrotechnic System", 13th Proceedings of the International Pyrotechnics Seminars, Grand Junction, C.O., U.S.A., pp. 209-225, July 1988.

Cited by

  1. The Characteristic Analysis and the Manufacture of Explosive ZPP on PMD using the High Speed Mixing Process vol.22, pp.3, 2018, https://doi.org/10.6108/KSPE.2018.22.3.008