• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3319-3326
• /
• 2014

Eosin yellow is used a dye and colorant but it is harmful toxic substance. In this paper, batch adsorption studies were carried out for equilibrium, kinetics and thermodynamic parameters for eosin yellow adsorption by activated carbon with varying the operating variables like pH, initial concentration, contact time. Equilibrium adsorption data were fitted into Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms. By estimated Langmuir constant value, $R_L$=0.067-0.083, and Freundlich constant value, $\frac{1}{n}=0.237-0.267$, this process could be employed as effective treatment for removal of eosin yellow. From calculated Temkin constant, value, B=1.868-2.855 J/mol, and Dubinin-Radushkevich constant, value, E=5.345-5.735 kJ/mol, this adsorption process is physical adsorption. From kinetic experiments, the adsorption process were found to confirm to the pseudo second order model with good correlation coefficient($r^2$=0.995-0.998). The mechanism of the adsorption process was determined two step like as boundary and intraparticle diffusion.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.892-898
• /
• 2017

In this study, the basic properties of recoverable gaseous and solid materials were investigated from heavy oil contained in the resources. The basic characteristics of pyrolysis reaction for the conversion of bituminous oil to pyrolysis various temperature were investigated. The characteristics of gas and solid phase byproducts were also investigated with a laboratory scale fixed bed reactor according to various reaction temperature. As a result, it was confirmed that the oil yield was about 17% at $550^{\circ}C$ and $CH_4$, $CaCO_3$ and CaO could be recovered as by-products.

• Resources Recycling
• /
• v.28 no.2
• /
• pp.40-45
• /
• 2019

During steelmaking in EAF, recycled scraps is used as a main material, melted by arc, and electricity use as a main energy. Slag foaming is an important technology for reducing electrical energy. CO gas generated by the reaction between injection carbon and (FeO), [C] and injection {$O_2$}. CO gas generated by this reaction is collected in slag, resulted in slag foaming. In general, the carbon materials used in the EAF process is anthracite and coke. This study investigated the effects of the carbon materials used on slag foaming in the steelmaking process. As a result of this study, the slag foaming height is increased by cokes rather than anthracite, and with an increase in the amount of particles samller than $500{\mu}m$. Based on these results, the application to the operation resulted in increase of slag forming height, reduction of injection carbon, and reduction of electrical energy.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.33-39
• /
• 2024

In this study, the basic properties of cement paste with varying replacement ratio of micro-silica and fumed silica were analyzed to determine the suitability of nanomaterials for use as concrete admixtures. Referring to the ultra-high strength mix, the fluidity of cement paste was evaluated according to the nanomaterial replacement rate and the compressive strength characteristics were compared and analyzed. The related properties of the reactive nanomaterials to the cement hydrate were analyzed using SEM and EDS to observe the microstructure and identify the components of the hydration product. The reactive nanomaterials used in this study had tap densities between 0.061 and 0.264 g/cm³, which were lower than SF. Micro silica exhibited excellent compressive strength properties with increasing replacement ratio, but fumed silica, unlike micro white, obtained excellent compressive strength at replacement ratio of 0.01~0.1 %. The same trend was observed in the hydration characterization.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.4
• /
• pp.64-68
• /
• 2010

Recently, MBT(Mechanical Biological Treatment) facilities were built up and operated to separate and recycle MSW(Municipal Solid Wastes)in South Korea. However, the size distribution of MSW is very rough, and it is causing operation problem because MSW would be crushed in undersize diameter by mechanical equipment before feeding each seperation process. Also, the organic material should be pre-seperated to reuse recycle material in MSW. In this research, the reactor of 1ton/batch using the super-heated steam was tested to present the separation efficiency and the size distribution of MSW by experimental factors.

• Knowledge Management Research
• /
• v.11 no.3
• /
• pp.1-11
• /
• 2010

The importance of intangible assets have increased unprecedentedly with the advent of the knowledge-based society. Investment in R&D has contributed to the rise of productivity and firm-value in the capital markets. but it is very difficult to determine the economic benefits of R&D investment, due to elusive link between time requirements and the realization of firm value from R&D investment. This study examines the differential effects of R&D expenditure and patents on firm-value by industry. Patents are intangible, proprietary rights that develops new products, plays a crucial role in market competition and results in research and development activities. If firms get patents, their R&D expenditure is assumed to be successful. The study analyzes whether successful R&D expenditure has a significant effect on the firm-value. The study considers two industries : high-tech industries and low-tech industries. These industries are expected to have different effect on R&D expenditure and firm-vale. The results of the study indicate that the successful R&D expenditure increased the firm-value. Successful R&D expenditure in high-tech industries more increased the firm-value more than that in low-tech industries.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.4
• /
• pp.115-124
• /
• 2007

The material compressions in the vertical composting reactor affect to the biodegradation rates of the organic wastes. This study investigated the variations of physical properties of the composting materials according to the height of reactor due to affect to the settlement in the vertical composting reactor. The variations of decreased temperature after peak temperature showed the different patterns depending on the reactor heights. The variation width of re-increased temperature after peak temperature was reduced as the mixing operations were increased, and increased as the height of reactor elevated. The moisture content and the variation width of the moisture content were increased higher as the height of the reactor became higher. The variations of the bulk density at each height of vertical reactor showed the same tendency comparing with those of the moisture content. The relationship between bulk density and moisture content had shown the quadratic equation (r2=0.94). The dry solid contents at each reactor height were decreased as the height of reactor were increased. The results of the variation of the physical properties during the composting process were caused by the downward compression of the material into the reactor. Settlement rate in the vertical composting reactor was estimated about 2.184cm/day. To increase the biodegradation efficiency in the vertical reactor, the conditions of air path in the composting material matrix have to be investigated afterwards.

• The Korean Journal of Mycology
• /
• v.21 no.1
• /
• pp.23-27
• /
• 1993

Ion effects on $11{\alpha}-hydroxylation$ of progesterone and $5{\alpha}-reduction\;of\;11{\alpha}-hydroxyprogesterone$ by Rhizopus nigricans were investigated. Metal ions such as $Cu^{2+},\;Cd^{2+},\;Co^{2+},\;Mn^{2+},\;Zn^{2+},\;Fe^{2+},\;Mg^{2+},\;Fe^{3+}\;and\;Na^+$ reduced the $11{\alpha}-hydroxylation$ activity, while $K^+$ stimulated the same reaction. Enzyme activity for the $5{\alpha}-reduction$ of $11{\alpha}-hydroxyprogesterone$ was increased in the presence of $Fe^{2+},\;Mn^{2+},\;Mg^{2+},\;Co^{2+},\;Zn^{2+},\;Fe^{3+},\;K^+\;and\;Na^+$, whereas it was decreased in the presence of $Cd^{2+}\;and\;Cu^{2+}$. Potassium ion of $10^{-3}\;M\;$ of concentration was found to be effective for the promotion of $11{\alpha}-hydroxylation$. On the other hand, cadmium ion of $10^{-4}\;M$ was proved to suppress the $5{\alpha}-reduction$ reaction. Progesterone is reported to be transformed into $11{\alpha}-hydroxyprogesterone$ which, in turn, is converted further into $11{\alpha}-hydroxy-allopregnane-3$, 20-dione by R. nigricans. From this point of view, the highest yield of $11{\alpha}-hydroxyprogesterone$ could be obtained when potassium ion of $10^{-3}\;M$ was given initially followed by addition of cadmium ion of $10^{-4}\;M$ to limit conversion of 11{\alpha}-hydroxyprogesterone into $11{\alpha}-hydroxy-allopregnane-\;3$, 20-dione.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.914-917
• /
• 2003

This study was undertaken to find the optimum condition for the Maillard browning reaction of tagatose and glycine model solution by applying the response surface methodology. Independent variables were pH (3, 5, 7), temperature (70, 85, $100^{\circ}C$), and time (60, 180, 300 min), while the dependent variables were absorbance, yellowness, color difference, and organoleptic score. The quadratic models with the cross-product proved to be suitable, due to the high coefficients of determination and the lack of fit results. Since all the dependent variables had saddle points, the optimal points were determined through ridge analysis. For absorbance, yellowness, and color difference, the optimal points were the lowest values; in contrast, the optimal point of organoleptic score was the highest value.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.9
• /
• pp.55-61
• /
• 2011

This study investigate the use of ultraviolet(UV) light with hydrogen peroxide($H_2O_2$) for Methyl Tert Butyl Ether(MTBE) degradation in photolysis reactor. The process in general demands the generation of OH radicals in solution at the presence of UV light. These radicals can then attack the MTBE molecule and it is finally destroyed or converted into a simple harmless compound. The MTBE removal by photolysis were mathematically described as the independent variables such as irradiation intensity, initial concentration of MTBE and $H_2O_2$/MTBE ratio, and these were modeled by the use of response surface methodology(RSM). These experiments were carried out as a Box-Behnken Design(BBD) consisting of 15 experiments. Regression analysis term of Analysis of Variance(ANOVA) shows significantly p-value(p<0.05) and high coefficients for determination values($R^2$=94.60%) that allow satisfactory prediction of second-order regression model. And Canonical analysis yields the stationery point for response, with the estimate ridge of maximum responses and optimal conditions for Y(MTBE removal efficiency, %) are $x_1$=25.75 W of irradiation intensity, $x_2$=7.69 mg/L of MTBE concentration and $x_3$=11.04 of $H_2O_2$/MTBE molecular ratio, respectively. This study clearly shows that RSM is available tool for optimizing the operating conditions to maximize MTBE removal.