• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.991-998
• /
• 1989

This investigation was carried out for the purpose of studying the turbulent flow and mixing characteristics after collision of two jets depending upon the cross angle variations. For effectuating this experimental study, a subsonic wind tunnel and a constant temperature type two channel hot-wire anemometer system have been utilized. The jets issuing from two nozzles have same Reynolds numbers and their cross angle was variable. After collision of two jets, the cross section of the mixing flow, mean and fluctuating velocities and Reynolds stresses have been measured, and analyzed comparing them with semi-empirical equations. It was found that the nondirectional contour of the cross section agreed well with an elliptic formula and the mean velocities along the centerline had a good similarity independent of cross angle variations. The distributions of U over bar-components measured in the Y direction have a good similarity and agree well with semi-empirical equations of Hinze and Gortler. The Reynolds stresses of u'v' over bar on the Y axis show a similar distributions and their agreement with the theoretical curve is remarkable but those of u'w' over bar measured along the Z axis are randomly scattered.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1109-1114
• /
• 2023

This study investigated the effects of utilizing 3D printed teaching aids on academic achievement and learning motivation in a non-face-to-face learning environment during the COVID-19 pandemic. The study was divided into an experimental and a comparison group that applied traditional lecture-based teaching and self-directed learning using 3D printed teaching aids and videos. The results of the study showed that the experimental group using 3D printed brain puzzles improved their academic performance compared to the comparison group using traditional lectures. This may be due to the fact that visual and experiential learning helped students to acquire knowledge on their own. The brain puzzles provided an interesting learning experience for the students, and their overall satisfaction with the class was also positive. These results indicate that teaching with teaching aids can increase students' motivation to learn and improve their academic performance. Therefore, the active introduction of 3D printed teaching aids in the non-face-to-face learning environment caused by COVID-19 is expected to improve the quality of education through innovation in learner-centered teaching methods.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.876-891
• /
• 1988

This study was carried out to investigate the mixing flow of a turbulent cross jet in a cylindrical chamber. A study on the turbulent mixing flow of a cross jet at 45.deg. with respect to each other in the free atmospheric condition was conducted before this study and has given us some fundamental experimental results. Present data have been analyzed and compared with semi-empirical equations for a round and a plane jets. Interests on this kind of cross jets (flows) have been increasing during the past several years for the purpose of the analysis of mixing flows and their applications. In this study, a turbulent cross jet of air in a cylindrical chamber has been conducted and the turbulent characteristics in the mixing region have been analyzed experimentally. The experimental data were discussed by comparing with the semi-empirical equations of Hinze and Gortler. From the experimental curve, the semi-empirical equations of mean velocities and Reynolds stresses have been derived. Three dimensional data acquisitions and the statistical treatments of turbulence characteristics were carried out by on-line computer measurement system connected with the constant temperature type 2-channel hot-wire anemometer system.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.1
• /
• pp.73-78
• /
• 2001

The biological carbon dioxide fixation using microalgae and photo-bioreactor has been known as an effective carbon dioxide reduction technology. As algae has many other environmental factor for its growth, the desirable cultivation factors were investigated using a green alga, Euglena gracilis Z. In this study, Euglena gracilis Z showed good $CO_2$ fixation ability in high $CO_2$ concentration of 10-20% and it contained the high protein and vitamin E enough to be used as fodder. For the mass cultivation, the continuous and semi-continuous cultivation methods were employed. The optimum hydraulic retention time (HRT) for the continuous cultivation was 4 days at carbon dioxide concentration of 10%. In this condition, the final cell number was $3.57{\times}10^6/m{\ell}$. The growth of Euglena gracilis Z increased according to the light intensity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.3
• /
• pp.218-225
• /
• 1996

Using water vapor adsorption data foe some typical Korean soils. we calculated the adsorption energy distribution functions and average adsorption energies for these soils using theory of adsorption on hetergeneous surfaces. As a local adsorption models the BET and a new Aranovich equations were applied. The distribution functions were broad, indicating rather high energetic inhomogeneity of the surface.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.2
• /
• pp.21-30
• /
• 2001

통계적 절리모델링에서 가장 불확실성이 큰 부분이 절리의 길이분포를 추정하는 것이다. 절리선 길이 분포의 추정에서 이제까지는 주로 조사선 조사(scanline survey)를 통한 절리선 반길이 분포를 이용하여 왔다. 이 연구에서는 포이송 디스크 절리모델에 대하여 보다 정밀도가 높은 절리선 길이 분포 추정방법을 찾기 위하여 조사창 조사를 이용하였다. 직사각형 및 원형 조사창에 대하여 양쪽 끝이 조사창 내부에 존재하는 절리선인 양끝내포선의 길이 분포와 한쪽 끝만이 존재하는 한끝내포선의 길이 분포를 이용, 절리선 분포를 추정하는 4개의 관계식을 각각 유도하고 컴퓨터 모의실험을 통하여 유도식의 타당성을 검증한 후 각 유도식을 이용한 절리선 분포의 추정오차를 비교하였다. 또한 절리선 분포로부터 절리직경분포를 계산하는 수치적 해를 유도하고 컴퓨터 모의시험을 통해 수치적 해에 대한 타당성을 검증하였다. 이 연구에서 제시한 조사창 조사를 이용한 절리 길이의 추정방법은 앞으로 절리모델링 분야에서 적용성이 높을 것으로 판단된다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.9
• /
• pp.870-878
• /
• 2000

An experimental study and a modeling are peformed to investigate the pressure drop of combining junctions in two-phase flows. Experiments on tripod geometry used in a condenser or an evaporator, are conducted with inlet mass fluxes from 200 to$ 400 kg/m^2$s, and pipe diameters of 7 m and 9.52 m. The working fluid is R22. The result shows that the pressure drop increases as the quality does, but the effect of the increase of the pressure decreases when the diameter of a pipe increases. When the mass flux increases, the pressure drop linearly does. Furthermore, when the pipe diameter decreases, the pressure drop has a quadratic increase.

• 전기의세계
• /
• v.12
• /
• pp.35-42
• /
• 1963

교류철도전화의 급전회로는 전원계통과 전원용변압기의 impedance도 생각하여야하겠으나, 이에 관한 것은 일반 송전문제에 양기되어 있고, 또 전차선로의 급전회로의 impedance가 중요한 입치를 점할뿐만 아니라 전차선로의 급전회로는 1선접지의 단상회로로서 접지측은 rail을 도체로 하여 대지상에 노출된 궤도상의 사이와 침목을 매개로 한 반접지상태의 특수한 회로를 구성하고 있으므로, 일반서지에 기술이 적은 부문에 속한 것같아 여기에 전차선로에 대한 impedance 를 산정하는 실험식과 예를 들어보기로 한다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.181-188
• /
• 1995

3차 비선형광학 재료를 설계하기 위해 단성분 산화물에서의 산소의 평균 전자분극률과 광학 염기도를 굴절율, 에너지 갭의 각기 다른 물성을 통해 산출하였다. Lorentz-Lornez식과 Duffy 의 반실험식을 도입하여 산소의 평균 전자분극율과 광학 염기도를 두가지 다른 물성으로부터 계산하여 비교하였다. 처음으로 독립적인 초기값에서 계산한 각각의 산소의 평균 전자분극률과 광학 염기도 사이에 좋은 상응관계가 있음을 확인하였다.

• Journal of the Korean Institute of Navigation
• /
• v.12 no.3
• /
• pp.39-53
• /
• 1988

반 잠수식 저 수선면적 쌍동선(Small WAterplane Area Twin Hull) 의 총 저항 추정을 위한 새로운 전산 program 개발에 대해서 개략적으로 설명하였다. SWATH ship의 총저항을 조파 저항, 표면 마찰 저항, Fin 저항 및 부가 저항의 합으로 계산하였다. 개발된 program의 정확성을 확인하기 위해서 수치 해석결과를 세 가지 SWATH 모델들의 실험치와 비교하였다.