• 한국해양학회지
• /
• v.30 no.3
• /
• pp.170-183
• /
• 1995

Eddies and surface current field in the southwestern part of the East Sea were investigated using satellite-tracked drifters, CTD, and ADCP from November 1992 to September 1993. Trajectories of surface drifters provided information for the first time on the meandering motion of the East Korean Warm Current in the Ullung Basin (referred as UB) and clearly indicated the existence of cyclonic and anticyclonic eddies of various scales. Anticyclonic eddies persisting for a relatively long period were observed in UB and the southwestern corner of the Northern (Japan) Basin (SNB), while a cyclonic eddy was found in the coastal area between Sokcho and Donghae during the summer. Analysis shows that the eddy in UB behaved as a stationary eddy at least during the observation period and the cyclonic eddy was closely related to the existence of a cold water mass. The anticyclonic eddy in SNB was larger than that in UB, but much elongated in shape. The eddy in UB is characteristic of major and minor axes of about 120 and 70 km, revolution period of 13.6 days, mean swirl velocity of about 24 cm/s, and mean eddy kinetic energy of 392 cm$\^$2//s$\^$2/. The eddy in SNB is described as follows; major and minor axes of 168 and 86 km, period of 14.9 days, mean swirl velocity of 29 cm/s and mean eddy kinetic energy of 629 cm$\^$2//s$\^$2/. The mean translational speed is about 3 cm/s for both eddies. The agreement of the surface current pattern in UB observed by ADCP with the geostrophic flow pattern may suggest that the eddy in UB was nearly in geostrophic balance. The eddy was found to be strongly bottom-controlled.

• Korean Journal of Cleft Lip And Palate
• /
• v.7 no.2
• /
• pp.77-91
• /
• 2004

본 연구의 목적은 반안면왜소증 환자의 하악골 신장술시 초기 치아골격 특성들 중에서 치료결과의 차이에 기여하는 인자를 찾는 것이다. 치료전의 치아골격 특성, 골신장술의 효과와 그 유지상태를 관찰하기 위하여 골신장술 직전(T0), 직후(T1), 추적 2년후(T2)에 측모와 정모 두부방사선 계측사진을 촬영하여 전후방, 수직치아, 비대칭 항목들을 계측하였다. T2 시기의 계측 결과에 따라서 환자들을 1군(양호군, 10명)과 2군(불량군, 9명)으로 분류하였다. 두 군에서 각 시기와 T0-T1, T1-T2 동안의 변화량의 차이를 Mann-Whitney U test, Wilcoxon signed independent t-test, rank test, ANOVA test를 사용하여 분석하였다. pruzansky type이 골신 장술의 성공과 실패 여부와 관계가 깊게 나타났다. T0 시기에 2군은 1군에 비하여 하악골이 후방위치되었고, 하악지 고경(ramus height)이 짧았고, 하악각(gonial angle)이 컸으며, 이환측 하악지가 내측경사되었고, 이환측으로의 이부변위(chin point deviation)가 크게 나타났다. 1군에서 골신장술의 주요한 효과는 하악지 고경의 증가, 하악골의 전방위치, 하악각의 증가, articular angle의 감소에 따른 하약골의 반시계방향 회전, 이환측의 하악지 경사의 증가, 교합면경사와 이부변위의 개선으로 나타났다. 그러나 2군에서는 골신장술을 시행했을 때 1군에 비하여 하악골이 시계방향으로 회전되었고 하악지 고경의 증가량이 작게 나타났다. T2 시기에 2군에서는 하악골의 반시계방향 회전이 나타났고, 하악지 성장이 일어나지 않았으나, 1군은 반대의 경향을 보였다. 이러한 인자들이 골신장술 결과의 차이에 기여하는 것으로 생각된다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.3
• /
• pp.105-114
• /
• 1997

Wind is one of the main forcing contributing the circulation of the East Sea. By using 1.5-layer and 2.5-layer reduced gravity models, circulation in the East Sea is simulated. The bifurcation of the Tsushima Warm Current (TWC), the separation of East Korea Warm Current (EKWC) from the east coast of Korea, the Nearshore Branch of TWC, and the cyclonic gyres stretched from the East Korea Bay to the northern half of the East Sea are compared well with the schematic map. The features of the upper and the lower layer are very similar except for those of the central region. The Polar Front is the separating line of two different features. The main feature of northern part of the East Sea, north of the Polar Front is cyclonic gyres, which are composed of three cyclonic gyres in most seasons. North Korean Cold Current (NKCC) and Liman Cold Current (LCC) are the nearshore part of these cyclonic gyres. In the south of the Polar Front the current systems of both layers are anticyclonic in most seasons, except that those of the upper layer in winter and spring are not anticyclonic. Along the coast of Korea and Russia, the velocity structure is barotropic, while that of the central region is baroclinic. The effects due to the seasonal variations of wind stress and local Ekman suction/pumping are studied by imposing the domain with modified wind stress. which is spatial mean with temporal variations and temporal mean with spatial variations. It is found that the local Ekman suction/pumping due to wind stress curl is important to the formation of the cyclonic gyres in the western and the northwestern region of the East Sea.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.601-611
• /
• 1996

Craniofacial growth pattern is an important diagnostic data in the course of orthodontic diagnosis and treatment planning ; it also has great influence in the establishment of occlusion as well as shaping and development of face. There have been many studies to classify different craniofacial growth patterns and attempts to predict growth patterns. This study aimed to correlate craniofacial growth pattern and symphysis morphology. 120 adult patients with age from 19 to 39 (mean age : 23.1) were chosen as subjects , using lateral cephalometric films. their anterior to posterior facial height ratios were calculated. They were divided into 3 groups - clockwise growth pattern with $56\%-62\%$(36subjects), counter-clockwise growth pattern group with $65\%$-80\%$(43subjects) and normal growth pattern group with $62\%-65\%$(41subjects). Symphysis morphology and Prominence evaluation in each subject were studied and the following conclusions were drawn : 1. In comparison of symphysis morphology between the sex groups, men showed large symphysis height and prominence. 2. Concerning the symphysis morphology, the clockwise growth pattern group showed larger height, H/D ratio and actual length but smaller depth, angle, effective length and E/A ratio compared to the counter -clockwise growth pattern group. 3. Those with smaller prominance of symphysis showed clockwise growth tendency and those with larger prominance showed counter-clockwise growth tendency.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.5
• /
• pp.364-370
• /
• 2009

With time, the stable management of turbidity is becoming more important in the water treatment process. So optimization of flocculation is important for the improvement of the sedimentation efficiency. we evaluated the hydrodynamic behavior in the rotation direction (clock-wise, counterclock-wise) of the flocculator in the flocculation basin using Computational Fluid Dynamics (CFD). The results of the CFD simulation, in cases where flocculators rotate in a clockwise direction, a stronger flow is formed near the surface of the water where the rotating direction and current of flow correspond. The variance and standard deviation of the flux are about 8.5 and 2.9 respectively. In contrast, in the case of a counterclockwise direction, a stronger flow is formed near the bottom of the basin. The variance and standard deviation of the flux are about 5.3 and 2.3, respectively. The effluent flux is affected more by the third flocculator spin than the first and second flocculator spins. The third flocculator spinning in the counterclockwise direction is better for the uniform flow of the sedimentation basin than the third flocculator spinning in the clockwise direction

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.2
• /
• pp.79-85
• /
• 1989

The generation and propagation of shelf wave-like oscillations induced by local wind at a basin with continental shelf and slope are studied by a numerical experiment. Three types of vortices are generated along western boundary and they propagate along the boundaries in the counter-clockwise direction. The first vortex is generated at the early stage of wind stress and its center is located off the continental slope. The second type centered on the continetal slope is generated at about the terminating time of wind stress and follows the first one. The third, centered on continental shelf, decays so soon that its propagation pattern is hard to be identified. Each of those vortices is probably to be one of free modes of the model basin.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.2
• /
• pp.121-132
• /
• 1993

A three-dimensional barotropic model is used to compute meteorologically-induced circulations in the East Sea for monthly, seasonal and annual basis. The computed barotropic responses have shown that in the upper part of the 40$^{\circ}$ North latitude. counterclockwise meso-scale eddies have been formed off Dong Han Man, middle part of the East Sea and sea area between the Siberian coast and Hokkaido throughout the year except summer season. These results are in good agreements with some of earlier schematic circulation diagram.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.4
• /
• pp.22-28
• /
• 2008

Friction stir welding(FSW) is an relatively new solid state joining process. A1606l-T6 aluminium alloy has gathered wide acceptance in the fabrication of light weight structures requiring a high strength to weight ratio and good corrosion resistance. This friction stir process(FSP) uses a non-consumable tool to generate frictional heat in the abutting surfaces. The welding parameters such as tool rotational speed, welding speed, etc., and tool pin profile playa major role in deciding FSP zone formation in A16061-T6 aluminium alloy. Tow different tool pin profiles have been used to fabricate the joints. The formation of friction stir processed zone has been analysed macroscopically. Tensile properties of the joints have been evaluated and correlated with the friction stir processed zone formation.

• Korean Journal of Microbiology
• /
• v.32 no.1
• /
• pp.70-77
• /
• 1994

The author isolated 7 mutant candidates which mapped around cysA (which was 10 o'clock). They were divided into two groups. One of them was located counterclockwise to cysA, and the other was clockwise to cysA. Since bldA was mapped counterclockwise to cysA, the candidate which mapped counterclockwise to cysA was transduced with phage containing wild type bldA gene clone. The candidates might be the alleles of bldA, because they were complemented by bldA clone. However some of such mutants sporulated very well and developed as much pigment as wild type on rich media plate. Their phenotype was not like bld mutant at all on such conditions. There were real antibiotics gene expressions, since transcriptional reporter gene xylE had shown high activities. Majority of the bldA like mutants showed act gene expressions when they were transformed with high copy number plasmid containing actII-ORF4.

• Journal of Energy Engineering
• /
• v.29 no.1
• /
• pp.34-43
• /
• 2020

A study has been done for self-starting torque of vertical axis wind turbine blade. It is especially concentrated to evaluate the torque coefficient before starting rotation. Two different aerofoils(AMI903 and AMI904) are proposed to benchmark the possible best blade(supercritical airfoil) for self-starting performance. Torque coefficients in the tangential direction of rotation are given with respect to the angle of attack in terms of drag coefficient and lift coefficient. Torque coefficient shows that the effect of Reynolds number is minimal. The thicker blade(AMI904) between two different proposed airfoils has bigger torque coefficient, which is attributed to lower lift coefficient and higher drag coefficient.