• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.149-157
• /
• 2004

We have calculated the power extraction efficiency and the lasing wavelength distribution of complex-coupled(CC) DFB lasers above threshold for various｜$\chi$L｜ and facet reflectivity combinations, and we have compared the results with those at threshold. Also, we have investigated the effect of coupling coefficient ratio(CR) and the reflectivity of AR facet on the power extraction efficiency and the lasing wavelength distribution. At threshold, the single mode yield as a function of power extraction efficiency of in-phase(IP) CC DFB lasers is the same as that of anti-phase(AP) CC DFB lasers. Above threshold, however, the single mode yield as a function of power extraction efficiency of IP CC DFB lasers is much larger than that of AP CC DFB lasers. For IP CC DFB lasers, AR-HR combination has high single mode yield and large power extraction efficiency compared to other facet combinations. IP CC DFB laser with AR-HR combination for ｜$\chi$L｜of 0.8 has the highest single mode yield and largest power extraction efficiency above threshold among the cases considered. For AR-HR combination, as CR increases and the reflectivity of AR facet decreases, both single mode yield and power extraction efficiency increase due to the reduction of the spatial hole burning effect. For AR-HR combination, the lasing wavelength of CC DFB laser has distributed over the stopband of DFB. As CR increases, the lasing wavelength concentrates on the long wavelength side for IP CC DFB laser, while on the short wavelength side for AP CC DFB laser. As ｜$\chi$L｜ increases, the width of the wavelength distribution decreases and the lasing wavelength moves to the long wavelength side.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.1
• /
• pp.34-44
• /
• 1990

This paper describe on the target strengths for the dorsal and the side aspects of swimbladdered fishes, Mullet Mugil cephalus, Flounder Pleuronichthys cornutus and Rock trout Hexagrammos otakii two frequencies of 50KHz and 200KHz in the experimental water tank in order to improve the biomass estimation by the scientific fish finder. The results obtained are as follows: 1. The average of maximum target strength normalized by squared total length in cm unit are almost ranging from -70.9 dB to -66.8 dB regardless of species or frequencies. 2. The average of maximum target strength normalized by two-thirds squared body weight in g unit are almost ranging from -57.1 dB to -54.1 dB regardless of species or frequencies. 3. In comparison with target strength for 50KHz and 200KHz the former is more strong than the latter.

• Journal of Korea Water Resources Association
• /
• v.36 no.1
• /
• pp.13-21
• /
• 2003

The purpose of this study is to estimate Z-R relationships of between radar reflectivity and rainfall rate. The Z-R relationships estimated that rainfall events are selected at Yeongchun water level station where the discharge recorded from 1,000cms to 8,519cms in chungju dam basin. The result of Z-R relationship distributed at thirty two raingage sites, the constant values of A and $\beta$ are distributed between 26.4 and 7.4, 0.9 and 1.56 respectively. The correlation coefficients of standard Z-R relationships(Z=200Rl.6)shows that 0.63 lower than each other raingage sites(0.65~0.748).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.410-415
• /
• 2013

Acoustic target strength (TS) is one of the most considerable design elements for survival capacities of the submarine. It needs to reduce acoustic TS that submarines are getting larger and larger, Alberich anechoic coatings are widely used as the representative method. In this paper, the finite element method (FEM) is used to analyze the reflection and transmission coefficients of Alberich anechoic coatings, which have periodic unit cells. The FEM results are compared with experimental results in the literature. Moreover, acoustic TS for the submarine is analyzed by using that result. Finally, it is shown that acoustic TS (Case 1: 10dB, Case 2: 6dB) are reduced due to the use of Alberich anechoic coatings.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.192-197
• /
• 2012

In this paper, a non-contact microwave technique was presented to detect the surface crack of the metals. An open-ended coaxial cable line was used as a sensor at 11 GHz, and the reflection coefficients were measured by scanning along the metal surface including artificial surface cracks. A parameter, the K value which was defined as the difference between maximum and minimum reflection coefficients, was measured and used to estimate the crack depth. A linear relationship between the K value and crack depth was found. This study showed that non-contact detection of the surface cracks of metals is possible using the open-ended coaxial line sensor at X-band.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.4
• /
• pp.15-23
• /
• 2015

This study predicts the basic characteristics of combustion instabilities in a gas turbine lean premixed combustor using ASCI3D code which is a FEM(Finite Element Method)-based Helmholtz solver. The prediction results show the good agreement with the measured data in modeling the overall combustion instability features, however, the code is found to overpredict the unstable conditions. As one of the efforts to improve the model accuracy, the effects of acoustic boundary conditions on the instability growth rate are analyzed. As a result, it is shown that the acoustic reflection coefficient has a great impact on the instability and the prediction accuracy can be enhanced by defining the precise acoustic conditions.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.153-157
• /
• 2007

본 논문은 지표면 현상의 관측에 날씨의 영향을 거의 받지 않는 마이크로파 L-밴드(1.95 GHz)와 C-밴드(5.3 GHz) scatterometer 시스템을 이용하여 농업과학기술원 내의 논에서 자라는 추청벼를 대상으로 2006년 5월 29일부터 10월 9일까지 생육에 따른 군락의 후방산란계수를 관측한 데이터와 작물의 생육과의 관계를 살펴보고 또한，측정 시스템의 개요，측정 시스템의 보정 방법들을 기술하고자 한다. Scatterometer 시스템의 송 수신기로 HP 8753D 벡터 네트워크 분석기를 사용하며，타워 위에 안테나를 설치하여 3.4 m의 높이에서 측정하도록 하였다. L-밴 드와 C-밴드 scatterometer는 VV-, VH-, HV-, HH-편파를 측정하여 fully polarimetric한 데이터를 얻도록 설계된 레이더시스템으로 입사각을 $30^{\circ}{\sim}60^{\circ}$에서 $10^{\circ}$간격으로 각각 30개의 독립적인 샘플을 측정하여 통계적으로 후방산란계수를 얻었다. 타워에서 발생하는 전파 잡음과 안테나 패턴의 부엽에 의한 지면에서의 수직반사(coherent 성분) 전파를 제거하기 위해 네트워크 분석기의 time gating 기능을 사용하며，55 cm 크기의 trihedral 전파반사기를 보정용 반사기로 사용하고， STCT(single target calibration technique) 방법을 이용하여 시스템을 보정하였다. 측정 결과를 분석하여 주파수， 입사각도， 편파의 변화에 대한 벼의 후방산란 특성과 벼의 생육상태과의 관계를 살펴보았다. L-밴드와 C-밴드 모두 벼의 생육과 밀접한 결과를 나타내었으나，입사각이 작을 때는 C-밴드와의 상관이 높게 나타났고 입사각이 커질수록 L-밴드와의 상관이 높게 나타났다. 편파는 L-밴드 와 C-밴드 모두 hh 편파가，입사각은 50도에서 가장 생육의 변이를 잘 설명하는 것으로 나타났다. 생육 데이터 모두를 이용한 경우보다는 유수형성기 또는 출수기 등 벼 생육의 질적인 변화를 보이는 시기에 따라 나누어 분석하는 것이 변화추이를 더 잘 설명하는 것으로 나타났다.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.71-76
• /
• 2023

In this paper, a humidity sensor using a microstrip patch antenna(MPA) and polyvinyl alcohol(PVA) is studied. PVA is a polymer material whose permittivity changes with humidity, and a rectangular slot is added to the radiating edge of the MPA, which is sensitive to changes in electric field, in order to increase the sensitivity to changes in relative permittivity. After thinly coating the area around the radiating edge with the rectangular slot of the MPA fabricated on a 0.76 mm-thick RF-35 substrate with PVA, the changes in the resonant frequency and magnitude of the MPA's input reflection coefficient are measured when relative humidity is adjusted from 40% to 80% in 10% increments at a temperature of 25 degrees using a temperature and humidity chamber. Experiment results show that when the relative humidity increases from 40% to 80%, the resonance frequency of the antenna' input reflection coefficient decreases from 2.447 GHz to 2.418 GHz, whereas the magnitude increases from -7.112 dB to -3.428 dB.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.199-210
• /
• 2023

The physical properties of rocks in reservoirs change after CO₂ injection, we modeled a reservoir with a transition zone within which the physical properties change linearly. The function of the Wolf reflection coefficient consists of the velocity ratio of the upper and lower layers, the frequency, and the thickness of the transition zone. This function can be used to estimate the thickness of a reservoir or seafloor transition zone. In this study, we propose a method for predicting the thickness of the transition zone using deep learning. To apply deep learning, we modeled the thickness-dependent Wolf reflection coefficient on an artificial transition zone formation model consisting of sandstone reservoir and shale cap rock and generated time-frequency spectral images using the continuous wavelet transform. Although thickness estimation performed by comparing spectral images according to different thicknesses and a spectral image from a trace of the seismic stack did not always provide accurate thicknesses, it can be applied to field data by obtaining training data in various environments and thus improving its accuracy.

• Korean Journal of Optics and Photonics
• /
• v.35 no.1
• /
• pp.1-8
• /
• 2024

Explicit expressions for the transmission pseudo-ellipsometric constants and transmittance of a semi-transparent glass substrate coated with thin films are presented to determine the optical constants of a very weakly absorbing thin film coated on a glass substrate. The intensity of the multiply reflected light inside the semi-transparent substrate is superposed incoherently and the light absorption by the substrate is properly treated, so that modeling analysis of thin films coated on a semi-transparent substrate can be performed with increased accuracy. The extinction coefficient derived from transmittance analysis is compared to that from ellipsometric analysis in the weakly absorbing region, and the difference between the two extinction coefficients is discussed in relation to the sensitivities of the transmittance and ellipsometric constants. This transmittance analysis, together with ellipsometric analysis, is applied to a glass substrate coated with a SiN thin film, and it is shown that the thickness and complex refractive index of the SiN thin film can be determined accurately, even though the extinction coefficient is very small.