• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.27-31
• /
• 1999

We designed and fabricated a monocolor holographic reflector for reflective LCDs with DuPont holographic photopolymer as a holographic recording media. By recording at 514 nm as holographic operating wavelength, it was possible to get the brightest image in green color. High contrast ratio is possible due to misalignment of the images with surface reflection and we achieved on/off contrast ratio of 6:1 by applying the fabricated holographic reflector to a TN-LC cell.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.126-127
• /
• 2003

1차원의 레이저빔을 공간내의 전방향으로 퍼트리는 새로운 광학기기인 중공형 원통 프리즘에 대해 보고하고자 한다. 중공형 원통 프리즘은 아래의 그림 1과 같이 속이 빈 유리튜브의 구조를 가진다. 레이저광이 유리관의 표면에 입사되면 반사 및 굴절의 현상이 나타난다. 일반적으로 유리는 굴절률이 공기보다 높아 내부반사가 여러 번 일어나므로 유리관 표면에 입사된 레이저빔은 유리관의 곡면을 따라 진행하면서 반사 또는 굴절의 과정을 반복적으로 거치게 된다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.134.1-134.1
• /
• 2014

콜로이달 리소그래피는 나노미터 크기의 나노구를 자가조립에 의해 정렬시킴으로써, 파장이하 크기의 주기 구조를 저비용으로 쉽게 구현할 수 있는 패터닝 기법이다. 콜로이달 리소그래피나 소프트 리소그래피와 같이 대면적 패터닝이 가능한 공정을 태양전지를 위한 반사방지 및 광 포획 증대 구조에 적용함으로써, 기존 성능을 크게 향상시켰다. 본 연구에서는, 유한차분 시간영역 수치해석법을 이용하여 반사 방지 및 광 포획 증대 구조에 대한 이론적 검증 및 설계를 진행하였고, 콜로이달 리소그래피 및 반도체 공정을 통해 샘플을 제작하였으며, 제작된 샘플의 성능을 적분구를 겸비한 자외선 가시광 근적외선 영역 분광기를 통해 평가하였다. 반사방지 나노섬을 겸비한 나노 원뿔대 언덕형 굴절률 소자를 구현함으로써, 300나노미터 이하의 구조체를 사용하지 않고도 근자외선 영역을 포함하는 태양광 에너지의 손실을 최소화할 수 있는 광대역 방사방지 구조체를 제시하였다. 나노 원뿔대가 격자상수 이상의 파장에 대한 언덕형 굴절률을 제공하고, 4분의 1파장 나노섬 반사방지막이 격자 상수 이하의 근자외선 태양광을 추가적으로 흡수하여, 근자외선 영역에서의 평균 반사율을 3.8% 수준으로 달성 할 수 있었다. 또한, 낮은 양호계수를 갖는 속삭임 회랑 공진기 어레이를 이용하여, 박막 태양전지에 적합한 유전체 기반 광포획 증대 나노구조를 제시하였다. 나노반구, 나노고깔, 나노구, 함몰형 나노구 어레이 형태를 가지며, 500nm의 주기를 갖는 유전체 표면 텍스쳐드 구조를 초박형 비정질 실리콘 필름(100nm) 위에 제작하여 광대역 광 포획 증대 효과를 실험적으로 평가하였다. 구조들 중 함몰형 나노구 어레이가 결합된 비정질 실리콘 박막이 가장 높은 성능을 보였으며, 구조가 없는 경우 대비 약 67.6%의 가중 흡수율 증가를 나타내었다. 특히, 함몰형 나노구 어레이 구조 중 폴리메틸메타아크릴레이트로 제작된 평판형 함몰층은 나노구 비정질 박막 실리콘 사이의 접착력 및 기계적 강성을 향상시켰을 뿐 아니라, 함몰층 내부로 회절되고 산란된 빛들이 도파모드 효과에 의해 부가적인 광 포획 증대를 가져옴으로써, 가장 높은 광 포획 효과를 얻을 수 있었다. 유전체 기반 나노 구조들은 간단하고 저비용이며, 대면적으로 쉽게 제작할 수 있는 자가 조립 기반 콜로이달 리소그래피 및 소프트 리소그래피 기술을 이용하여 제작되었다.

• Journal of Sensor Science and Technology
• /
• v.8 no.4
• /
• pp.333-340
• /
• 1999

A reflective interference type optical modulator to compose the electric field sensor is proposed, and the performance and characteristics are theoretically analyzed. For the high sensitivity of the sensor, a method to improve the modulation index of the modulator is presented. The electric field sensor using $Ti:LiNbO_3$ waveguide was fabricated and qualitatively investigated the characteristics by measuring the low frequency electric field. Even though the sensor showed very low modulation index of 5%, the electric filed strength of 5 V/cm was measured. The experimental results revealed the utilities of this type electric field sensor.

• 한국해양학회지
• /
• v.28 no.4
• /
• pp.313-322
• /
• 1993

The Western south Sea of Korea can be divided into 4 acoustic facies (AF I-AF IV) according to the variations of acoustic characters. Typical acoustic characters revealed in high-resolution seismic profiles (3.5kHz) are prolonged, internal reflected, non-penetrated, and transparent types. These acoustic types probably controlled by bottom condition and sediment properties such as composition and compaction of sediments. Acoustic facies I is characterized by prolonged type which is produced by absorbing of acoustic signals on the coarse sediments including gravels and shell fragments and irregular bedforms. Acoustic facies II is characterized by internal reflected type which is probably produced by differential sediments compaction. Acoustic facies III is characterized by non-penetrated type caused by scattering of acoustic signals on the well sorted fine ad very fine sand sediments. Acoustic facies IV is characterized by transparent type with non-internal reflector in limited thickness. Acoustic types in high-resolution profiles provide important information not only about the stratigraphy of sub bottom but also abut the sedimentary processes in shallow sea.

• The Optical Journal
• /
• v.10 no.3 s.55
• /
• pp.50-57
• /
• 1998

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.5
• /
• pp.398-408
• /
• 2007

For better evaluation of material thickness by using the reflection type pulsed eddy current method, various probe models are designed and their response signals, characteristics, and sensitivities to thickness variation are investigated by a numerical analysis method. Since the sensor needs to detect magnetic fields from eddy currents induced in a test material, not from the exciter coil, two types of models that are shielded by the combination of copper and ferrite and only by ferrite are considered. By studying response signals from these shielded probe models, the peak value and the zero crossing time are selected as useful signal features for the evaluation of material thickness. Investigation of sensitivities of these two features shows that the sensitivity of peak value is more useful than that of zero crossing time and that the probe shielded only by ferrite gives much better sensitivity to thickness variation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.1
• /
• pp.1-7
• /
• 1974

This paper discribes the reflector type ultrasonic concentrator which makes hghintencity of ultrasonic field. This was made by rotating parabolic surface which only using total reflection aria, that makes boundary by the critical angle of reflection of sound. I made two binds of concentrator acording to the type of ultrasonic transduser: one is internal surface reflector type concentrator, which is available for disc type transducer, and the other is external surface reflector type concentrator which is available cylinderical transduser. In the mony aspects the reflector tripe concentrator is supel'ier to the reflection type concentrator as plastics lens; It is more durable in high temperature and high intencity ultrasonicfield then refrector type concentrator because of it is made by glass or metal, and it has higher. efficiency because of it wasts made by only total reflection aria that is without absoption lose. I think this is useful ultrasonic concentrator in mony industrial field, in which high intencitr of ultrasonic energy was used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4139-4145
• /
• 2012

This paper shows an antireflection coating design skill for utilization the thin-film silicon solar cell in the future. The reflectivity of each index profile previously suggested as linear, cubic and quintic function has been calculated and compared. Each index profile is applied to the antireflection coating consisting of 6 layers with 180nm thickness. Also we suggest the graded index profile and compare it's reflectivity to the linear, cubic and quintic's ones. As a results we find the reflectivity generally decreases as the order goes to higher. However the reflectivity in the graded index profile shows the higher(lower) value than ones in the linear, cubic and quintic especially in the shorter(longer) wavelength range from 500 nm to below 700 nm(above 700 nm to 800 nm). Therefore we find that the graded index profile structure could be applied for the better antireflection coating design scheme especially for optical device and optical filter in the range of from deep red to infrared.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.7-13
• /
• 2009

By incorporating a polarization beam splitter and fiber coupler, we propose a fiber-optic multiwavelength-switchable interleaving filter that can function as a polarizaiton-independent transmission or reflection-type one. The proposed filter consists of a polarizaiton beam splitter and a Sagnac birefringence loop that is composed of a 50:50 coupler, polarizaiton-maintaining fibers, and two quarter-wave plates. In the proposed filter, a transmission-type filter with a channel isolation > 18[dB] or a reflection-type one with a channel isolation ~3[dB], whose channel spacing and switching displacement were 0.8 and 0.4[nm] in common, respectively, could be obtained. Channel interleaving operation could be performed by the proper control of waveplates within the Sagnac birefringence loop.