• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.2
• /
• pp.102-109
• /
• 2000

This paper describes two different theories used to model the scattering of ultrasound by a volumetric flaw and a crack-like flaw. The elastodynamic Kirchhoff approximation (EKA) and the geometrical theory of diffraction (GTD) are applied respectively to a cylindrical cavity and a semi-infinite crack. These methods are known as high frequency approximations. The 2-D elastodynamic scattering problems of a plane wave incident on these model defects are considered and the scattered fields are expressed in terms of the reflection and diffraction coefficients. The ratio of the scattered far field amplitude to the incident wave amplitude is computed as a function of the angular location and compared with the boundary element solutions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.5
• /
• pp.410-418
• /
• 2009

Based on a linear potential theory, the boundary element method(BEM) is developed and applied to analyze the hydrodynamic forces and the motion responses of a floating body with a partially reflective sidewall. The hydrodynamic forces (added mass and damping coefficients) are dependent on not only the submergence of a floating body and the reflection of a sidewall, but also the gap between body and sidewall. In particular, the partial reflection of a sidewall plays an importance role in the motion responses of a floating body at resonant frequencies. It reduces the resonant peaks caused by resonance phenomenon due to the wave trapping in an enclosed fluid domain between body and sidewall. Developed predictive tools can be used to assess the motion performance of a floating body for various combinations of configuration of a floating body, wave heading, sidewall properties, and wave characteristics and applied to supply the basic informations for the harbour design considering the motion characteristics of a moored ship.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.758-765
• /
• 2016

In this study, wave damping due to a permeable bed of finite depth was modelled using a complementary mild-slope equation for stream function. The energy dissipating term in the mild-slope equation was presented in terms of stream function. In order to prevent re-reflection of reflected waves along the outer boundary, a delta-function-shaped source function was derived to generate a wave in a computational domain. Numerical experiments were conducted to measure the reflection coefficient of waves over a planar slope for various incident wave periods. The numerical result of the proposed model was compared with that of an integral equation method, showing good agreement in general. However, the proposed model showed relatively higher transmission rate for the larger permeability and the longer wavelength.

• The Korean Journal of Petroleum Geology
• /
• v.1 no.1 s.1
• /
• pp.29-35
• /
• 1993

Seismic reflection data can be used to extract information about the velocity structure of the earth. This process is called a velocity inversion of the seismic data. However, it is difficult to recover a broad band reflection coefficient series because the frequency band of seismic trace is limited. The linear programming method has been examined to find the simplest velocity model that has frequency components consistent with the usable frequencies of the seismic trace and interval velocity data. The velocity structure of the earth is displayed in pseudovelocity section. After the linear program had been tested with a synthetic seismic trace, it was applied to the seismic reflection data of the Block Ⅱ in the Yellow Sea. By comparing the pseudovelocity section with sonic logs obtained from the well in the same area, it was possible to define the lithostratigraphy and the boundaries of Cretaceous volcanics and Cretaceous metavolcanics.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1998.10a
• /
• pp.861-866
• /
• 1998

본 논문은 프로우브 급전한 주기적인 위상 배열 마이크로스트립 안테나의 계산된 결과를 제시한다. 수치적인 마들은 엄밀한 그린 함수와 캘러킨 (Galerkin)해에 근거를 둔다. 임의의면(plane)에서의 입력 임피던스를 스캔 각도에 따라 계산하여 반사계수를 구하고 유전체의 유전율과 두께가 위상 배열 안테나에 미치는 영향을 제시한다. 표면파에 의한 스캔 블라인드 현상을 설명하고 유전체의 두께에 따른 E-면과 H-면에서의 입력 임피던스 대역폭을 계산한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.3
• /
• pp.135-140
• /
• 1999

To simulate the wave transformation by an energy dissipation region, a numerical model is suggested by discretizing the elliptic mild-slope equation. Generalized conjugate gradient method is used as solution algorithm to apply parabolic approximation to open boundary condition. To demonstrate the applicabil-ity of the numerical procedure suggested, the wave scattering by a circular damping region is examined. The feature of reflection in front of the damping region is captured clearly by the numerical solution. The effect of the size of dissipation coefficient is examined for a rectangular damping region. The recovery of wave height by diffraction occurs very slowly with distance behind the damping region.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.150-158
• /
• 2003

In the beam pattern synthesis problem using line source, the relationship between source distribution function and beam pattern may be represented by Fourier transform pair. In this paper, a general method to synthesize the line source distribution for a desired lobe-like beam pattern is presented by developing the nonlinear inversion method based on an iterative sampling technique. This method can be applied to the synthesis of continuously distributed dielectric constants satisfying the desired inverse scattering coefficient patterns when illuminating by TE-polarized and TM-polarized plane waves to arbitrary dielectric material. Furthermore this method can also be applied to the synthesis of transmission line with arbitrary reflection coefficient patterns. Some bandstop spatial filter and dispersive transmission line filter are illustrated for generality.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.430-439
• /
• 1999

In this paper, we have chosen Inchon International Airport as an area for estimating flutter interference to estimate and analyze the flutter Interference. We have proposed a method to overcome flutter interference. The simulation has been performed considering the received power of a direct wave, the height of an antenna, the ERP of a transmitting point, and the reflection coefficients as an estimation function for the flutter. From the simulation results, we have found that the flutter Interference from flights is very serious, and the degree of flutter interference can be changed according to the distance between an airplane and a transmitting point, the profile between transmitting and receiving points, and the reflection coefficients of an airplane.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.393-399
• /
• 2006

In this paper we applied a ray tracing method to estimate the scattering characteristics from large scale random rough surfaces. For the electromagnetic field evaluation, we have used the diffracted coefficient of the knife edge diffraction for the diffracted rays and Fresnel's reflection coefficients in connection with reflected rays. In addition, we examine to search for the traced rays using the imaging method which can be obtained all rays to arrived at receivers accurately and the diffracted field from rough surfaces is considered. Numerical examples have been carried out for the scattering characteristics of an ocean wave-like rough surface and delay spread characteristics of a building-like surface. In the present work we have demonstrated that the ray tracing method is effective to numerical analysis of a rough surface scattering.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.4
• /
• pp.11-19
• /
• 1995

In this paper, the Finite Difference Time Domain (FDTD) method is used to analyse the characteristics of the coaxial line transmission coefficent, shielding effectiveness, and compared to results of the moment method. The excitation mode of the Gaussian pulse is assumed to be a TEM-mode instead of the TE or TM-mode and in order to eliminate the reflected wave with in short length of the line. Calculated value of shielding effectiveness of the coaxial line by the FDTD are in good agreement with the results of the moment method.