• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.115.2-115.2
• /
• 2011

실리콘 박막 태양전지는 기판의 표면형상에 따라 셀 내부에서 이동하는 빛의 광학적인 경로가 크게 증가하여 변환효율의 향상을 기대할 수 있다. 금속 기판은 다양한 표면형상으로 가공이 용이하고 강도와 인성이 우수하며 가격이 저렴하여 실리콘 박막 태양전지의 기판재로 활발한 연구가 진행되고 있다. 본 연구에서는 금속 기판의 표면형상이 반사특성에 미치는 영향을 알아보고자 하였다. 금속 기판재의 표면형상은 기계적 연마 방식을 응용하여 다양하게 제작하였다. 반사특성을 보기 위하여 UV-visible spectrometer를 사용하여 총 반사율과 산란 반사율을 측정하였고, 표면 형상에 따른 Fe-Ni 기판과 Ag 후면반사막의 반사 특성이 태양전지 셀 내부의 광포획의 증가에 어떠한 영향을 주는지 비교 분석하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.275-282
• /
• 1998

In this paper, we designed and fabricated 5-stage microwave solid state power amplifier using balanced amplifier scheme for X-band electronic radar reflector. The used substrate is FR4 and the used active devices are FHX35LC, FLK012WF and FLK022WG. The circuit design and optimization had been carried out through the microwave CAD program CNL2 The measured values show 46dB in gain, input return loss -14.2dB, output return loss -16.6dB and IM3 is 32dBc at designed bandwidth. The measured results are almost agreed with the simulated values.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.299-299
• /
• 2010

태양전지 셀에서 표면 반사에 의한 태양광 손실을 보다 적게 하여 흡수량 증가시킬 필요가 있다. 태양전지에서 생성된 전자 정공 수집 향상을 위해 금속 재질로 이루어진 그리드 전극을 사용한다. 이때 금속 그리드에 입사되는 태양광은 대부분 반사되어 입사광의 손실로 이어진다. 본 연구에서는 결정질 실리콘 태양전지에서 표면 그리드에 의한 광학적 손실을 반사율을 통해 확인하였고 양자효율을 측정하여 보았다. 결정질 실리콘 태양전지 표면 반사율 측정은 적분구를 사용하였고, 측정에 사용된 태양전지 샘플은 일반적인 구조의 결정질 실리콘 태양전지이다. 실험은 표면 그리드 공정 전 후의 샘플로 실험을 진행하였고, 셀의 표면 균일도에 의한 확인을 위하여 동일한 면적 비율의 입사광을 조사하여 반복 실험을 하였다. 양자효율 측정은 광학 초퍼를 통한 광원과 분광기 및 검출기를 포함하는 태양전지 특성 분석 장치를 사용하였다. 그 결과 특정 파장 대역에서 그리드의 유무에 따른 반사율의 변화와 이에 따른 양자효율의 변화를 통하여 그리드에 의한 결정질 실리콘 태양전지의 특성변화에 대해 알아보았다.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1149-1160
• /
• 2019

In this study, two radiometric correction methods deriving reflectance from UAV multispectral image for monitoring forest vegetation were applied and evaluated. Multispectral images were obtained from a small multispectral camera having 5 spectral bands. Reflectance were derived by applying the two methods: (1) the direct method using downwelling irradiance measurement and (2) the empirical line correction method by linking a set of field reflectance measured simultaneous with the image capture. Field reflectance were obtained using a spectroradiometer during the flight and used for building the linear equation for the empirical method and for the validation of image reflectance derived. Although both methods provided the high correlations between field reflectance and image-derived reflectance, their distributions were somewhat different. While the direct method provided rather stable and consistent distribution of reflectance all over the entire image area, the empirical method showed very unstable and inconsistent reflectance distribution. The direct method would be more appropriate for relatively wide area that requires more time to acquire image and may vary in downwelling irradiance and atmospheric conditions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.435-442
• /
• 2014

In this paper, radar cross section (RCS) analysis program, RACSAN has been developed to predict RCS of complex structures. RACSAN is based on the high frequency range analysis method of Kirchhoff approximation in physical optics (PO). This program can present RCS including multi-bounce effect in complex structures by combination of geometric optics (GO) and PO method. GO method has a concern in the evaluation of the effective area, and PO method is involved in the calculation of RCS for the final effective area that is evaluated by GO method. Comparisons of the predicted results and analytical solutions showed that the developed program could be an effective tool for predicting RCS in complex structures.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.369-374
• /
• 2004

In this paper, we propose a new tunable laser diode structure. The laser diode consists of a sampled-grating distributed feedback laser diode monolithically integrated with a sampled-grating distributed-Brags-Reflector. For a specific design, the possibility of continuous/discrete wavelength tuning over 27nm is confirmed by a numerical analysis using a split-step time domain model. Because the laser diode can be directly coupled with optical fiber without the intervention of the passive section, the laser diode exhibits higher output power than the conventional laser diode.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.48-49
• /
• 2007

자외선 살균기는 기존의 살균기보다 효율적으로 작동되어, 모델의 세균살균을 향상시키기 위하여 투과 반사와 오존을 복합적으로 사용하였다. 투과 반사 효과가 기존의 모델에 비해 세균살균의 효율에 상당한 영향을 주었음을 알 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.9-18
• /
• 2003

Two configurations of Film Bulk Acoustic Wave Resonators with acoustic quater-wave bragg reflector layers are theoretically analyzed using equivalent circuits and the difference of their characteristics are discussed. We compare the characteristics of λ/2 mode to those of ideal FBAR with top and bottom electrode contacting air and the characteristics of λ/4 mode to those of ideal FBAR with top electrode contacting air and bottom electrode clamped. We assume that the piezoelectric film is ZnO, the electrode is A1 and the substrate is Si, ABCD parameters are extracted and input impedance is calculated by converting the equivalent circuit from Mason equivalent circuits to the simplified equivalent circuits that ABCD parameters are extracted possible, From the variation of resonance frequency due to the change of thickness of reflector layers and the variation of electrical Q due to the change of mechanical Q of reflector layers, it is confirmed that the reflector layer just under the bottom electrode have the greatest effect on the varation of resonance frequency and electrical Q. It is shown that the number of reflector layers required for the saturation of electrical Q decreases with the increase of the impedance ratio of reflector layers and electrical Q of λ/2 mode is larger than that of λ/4 mode, Electromechanical coupling factor is independent of the number of layers, The impedance ratio of reflector layers becomes larger as the electromechanical coupling factor becomes larger, The electromechanical coupling factor of the two mode are smaller than those of ideal FBARs because of the trapping of acoustic energy in the reflector layers, The insertion loss of the ladder filter decreases with the increase of the number of reflector layers but the bandwidth is not affected much by the number of reflector layers, As the impedance ratio of reflector layers becomes larger the insertion loss becomes smaller and the bandwidth becomes wider, In our analysis of the two mode, characteristics of λ/2 mode appear to be slightly more favorable than that of λ/4 mode

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.3 no.1
• /
• pp.14-25
• /
• 1992

The present study was purposed to find out variables of childhood antisocial behavior. The variables consisted of social cognition competence(Peer perception. acquaintance perception, frustration situation perception). academic competence(Visual integration function. written expression function, grammar closure function). The subject in this study were 32 nine year old-fourteen year old antisocial behavior boys and 32 third grade in elementary school-second grade in middle school normal boys and girls. The results of this study were obtained as follows. 1) In peer perception antisocial behavior children perceived peer as more supportive than normals. In acquaintance perception. there was no difference between groups. 2) In frustration situation perception, normal children used intropunitive attack still more than antisocial behavior children and antisocial behavior children perceived frustration situation more sensitive than normals and they were less active in problem solving aspects than normals. 3) In Academic competence, antisocial behavior children have deficits in visual motor integration function, written expression function. grammar closure function.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.35-35
• /
• 1998

충격파의 경사반사는 초음속 비행체의 외부유동, 대형압축기의 디퓨져 내의 유동, 증기 터어빈 최종단 익렬유동, 데토네이션파가 벽면에 입사하는 유동 혹은 램제트의 연소공기 유입구 유동 등 초음속 유동에서 흔히 발생하며 이때의 유동장의 해석과 충격파 감쇄, 충격파와 간섭하는 벽면의 영향 등은 공학적으로 구명되어져야 할 중요한 문제이다. 전파하는 평면충격파가 벽면에 입사하는 경우 일어나는 충격파 경사반사는 크게 정상반사와 마하반사로 대별된다. 정상반사와 마하반사 간의 천이기준에 대한 연구는 오래 전부터 수행되어 왔고 입사충격파가 약한 경우 이론적 천이 기준인 이탈기준(detachment criterion)과 실험값의 차이 즉 Neumann paradox가 존재한다는 것이 밝혀졌다.