• Title/Summary/Keyword: 반사기

Search Result 1,277, Processing Time 0.027 seconds

Fabrication and Characteristic Analysis of a Holographic Head-Mounted Display (홀로그래픽 Head-Mounted Display 소자의 제작 및 특성분석)

  • 김희동;정만호
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2001.02a
    • /
    • pp.200-201
    • /
    • 2001
  • 헬멧 장착형 HMD(Head-Mounted Display) 시스템은 비행기 조종사나 저격수의 시선을 크게 움직이지 않고 군사 전술상의 현재 상태를 볼 수 있도록 하여 눈의 피로감을 줄이고 시선의 이동에 의한 돌발적인 사고의 위험을 감소시킬 수 있어 군사적으로 유용한 장치이다 HOE(Holographic Optical Element)의 중요한 응용 분야 중 하나로 HMD에서의 결상 렌즈 또는 광 결합기가 있다 HMD 시스템에서 HOE의 역할은 2차원의 단색 디스플레이 영상을 헬멧 착용자의 눈에 반사하여 결상시키는 것이다. (중략)

  • PDF

광학적 방법에 의한 전열관 레이저용접 감시기술

  • 백성훈;김민석;정진만;김철중
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05d
    • /
    • pp.449-454
    • /
    • 1996
  • 원자력발전소 증기발생기 전열관의 레이저 슬리브 용접시, 레이저 전송 및 용접상태의 광학적 감시방법을 개발하였다. 전열관 레이저용접은 용접 중의 레이저 출력, 레이저 전송 광학계의 파손여부, 광학 정렬상태 등을 정확히 감시하며 수행하여야 하지만, 작업공간의 협소함과 방사능 공간이라는 어려움 때문에 적절한 감시방법이 없었다. 본 연구에서는 레이저 빔 전송을 위한 광섬유 광학계를 그대로 이용하여, 용접시 발생되는 radiation과 용접 표면에서 반사되는 Nd:YAG 레이저 빔을 측정하여 레이저 및 광학계 상태를 실시간 감시할 수 있는 기술을 실험적으로 확인하였다. 실험은 Inconel plate를 시편으로 이루어졌으며, 레이저 펄스길이, 레이저 반복률에 따른 감시 조건과 초점확인 기능에 대해서도 논의하였다.

  • PDF

The Directional Coupler Using the Vertical Coupling Structure (수직 결합 구조를 이용한 방향성 결합기)

  • Yun, Tae-Soon
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.12 no.3
    • /
    • pp.445-450
    • /
    • 2017
  • In this paper, the directional coupler with half-power division is designed and fabricated by using the vertical coupling structure based on the CPW transmission-line. Even-mode and odd-mode of the vertical coupling structure can be analyzed by the conventional CPW-line and the CBCPW-line, respectively, with half thickness of the substrate. The directional coupler is designed by using the tefron substrate with the dielectric constant of 2.55 and the thickness of 0.76mm. Manufactured directional coupler has the center frequency of 2.45 GHz and the bandwidth of 66.1%. Also, the return loss and isolation are 19.52dB and 19.47dB, respectively, at the center frequency.

A Design on the Four-Horn Triple-Mode Type Monopulse Feeder at X-Band (X-대역 4혼 삼중 모드 모노펄스 급전기 설계)

  • Kim, Chan-Hong;Kim, Seung-Gak
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.21 no.5
    • /
    • pp.528-536
    • /
    • 2010
  • A monopulse feeder gives the most important impact upon the radiation pattern characteristics of a multi-function radar or a tracking radar which uses the space feed. It is described that the triple-mode type monopulse feeder which possesses the optimum aperture illumination for three monopulse channels is designed and measured in this paper. The measured results show that the designed feeder has not only the characteristics of the optimum aperture illimination in each channel and also very low return loss over the 10 % of fractional bandwidth at X-band. This means that the feeder provides the antenna system with low sidelobe level and high monopulse slope characteristics.

A study of Concurrent Dual Band Mixer Design Using Dual-Gate FET Structure (Dual-Gate FET구조를 이용한 Concurrent 이중 대역 주파수 혼합기 설계 연구)

  • Jung, Hyo-Bin;Choi, Jin-Kyu;Kim, Hyeong-Seok
    • Proceedings of the KIEE Conference
    • /
    • 2008.05a
    • /
    • pp.153-156
    • /
    • 2008
  • 본 논문은 Local oscillator의 2차 harmonic 신호를 이용하고 Dual gate FET 형태를 이용한 이중대역 주파수 혼합기 설계에 대한 연구 이다. 기존의 회로 구조는 두 대역을 처리하기 위해 각각 두 개의 국부 발진기와 혼합기를 사용함으로 인하여 구조의 복잡함과 큰 전력 손실이라는 단점을 가지고 있었다. 본 연구는 하나의 주파수 혼합기로 두 개의 대역에서 동시에 적용할 수 있는 Concurrent 이중 대역 설계 연구를 하였다. ISM(Industrial Science Medical) 대역 인 912MHz, 2.45GHz의 RF 입력과 455.5MHz, 1224.5MHz의 LO 입력 신호에서 동일한 IF인 1MHz로 하향변환 했을 때 모의실험 결과 변환이득은 각각 7dB, 12dB로 이고 RF-LO 격리도는 -29dB, -24.7dB가 나왔다. 또한 두 입력 단에서의 반사손실의 -15dB 이상을 얻었다. 또한 각각의 대역에서 잡음지수는 8.5dB, 6.26dB이다.

  • PDF

An Analysis Method of Lumped-element Directional Coupler for CATV by Even- and Odd-Mode Theory (CATV용 집중정수형 방향성결합기의 우기모드 해석법)

  • Ha, Do-Hoon;Kim, Dong-Il
    • Journal of the Korean Institute of Navigation
    • /
    • v.25 no.2
    • /
    • pp.131-136
    • /
    • 2001
  • A new analysis method of lumped-element directional coupler for CATV was proposed, where the even-and odd-mode theory for a symmetrical coupled-line directional coupler was applied to a transformer-type directional coupler. In addition, the tap-offs were analyzed by the proposed theory, which are widely used in CATV (Cable Television) systems. By comparing the calculated results for S-parameters results to the measured ones using only the even-and odd-mode reflection coefficients, the validity of the proposed analysis method was confirmed. Then, it was clearly shown that the tap-off has very wide bandwidth from 5 MHz to 4,000 MHz by adopting the proposed theory.

  • PDF

Performance Improvement of STDR Scheme Employing Sign Correlator (부호 상관기를 활용한 STDR 기법의 탐지 성능 개선)

  • Han, Jeong Jae;Noh, Sanguk;Park, So Ryoung
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.40 no.6
    • /
    • pp.990-996
    • /
    • 2015
  • This paper proposes an enhanced scheme adding a sign detector at the front of the correlator in STDR (sequence time domain reflectometry) system. We have executed simulations to show the improvement of detection performance in two fault types and various fault locations. Consequently, it can be shown that the proposed scheme improves the detection performance of the location of far-fault without increasing the computational complexity.

New Split Ring Resonator and Band-pass Filter Using Meta-Material (메타 인공 물질을 이용한 새로운 Split-Ring 공진기 및 대역통과 필터)

  • Yoon, Ki-Cheol;Lee, Jong-Chul
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.9 no.4
    • /
    • pp.22-31
    • /
    • 2010
  • In this paper, a new split ring resonator using left-handed meta-material adapted in a bandpass filter with 2-stages is suggested. In this proposed bandpass filter, the size of the novel resonator can be easily controlled. Also, the bandwidth can be adjusted with the position of the tapped-line. The proposed resonator and filter has the center frequency of 10 GHz for I-band in military-satellite communication system with the Qe value of 184. The experimental results of the filter show that the insertion and return losses are 1.43 dB and 16.8 dB with bandwidth of 10 %, respectively.

Implementation of Polarization Beam-Splitter based on DFB-Assisted Plasmonic Multimode Interference Coupler (DFB 구조형 플라즈마 다중모드 간섭 결합기를 사용한 편향기의 구현)

  • Ho, Kwang-Chun
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.13 no.5
    • /
    • pp.143-148
    • /
    • 2013
  • A novel ultracompact polarization beam-splitter (PBS) combining two plasmonic multimode interference couplers (P-MMICs) and DFB guiding structure is implemented. The $2{\times}1$ and $1{\times}2$ P-MMICs are designed to collect the polarized powers of TE and TM modes reflected by or transmitted through an internal DFB structure. The simulation results show that the designed DFB-assisted PBS is very short (about $75{\mu}m$), and has a low insertion loss, a high extinction ratio, and a broad bandwidth of 20 nm.

Design of a Retrodirective Active Array Antenna in the LS band (LS밴드 역지향성 능동배열 안테나의 제작)

  • Chun, Joong-Chang;Kim, Tae-Soo
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • v.9 no.1
    • /
    • pp.689-692
    • /
    • 2005
  • In this paper, we have developed a retrodirective active array operating in the 2 GHz LS band. The retrodirective array has the property of re-directing any electromagnetic wave back to the incoming direction without any priory informations. The system is consisted of frequency mixers and antenna array. The mixer is acting as a phase conjugator. In this research, 2-port gate mixers using pHEMT and 1${\times}$4 monopole array have been used. The retrodirective array developed in this research can be applied in the base station facilities for the wireless mobile communications and RFID transponders.

  • PDF