Grain refinement is the only strengthening mechanism that improves both strength and toughness. Controlled rolling and accelerated cooling techniques have been known to be effective method to improve the mechanical properties by controlling the recrystallization and/or grain coarsening during processing. Repeat phase transformation $(\gamma/\alpha)$ by repeat heat treating is another way of grain refinement. In this study, a combined effect of controlled rolling and repeat heat treating was investigated. To study the effects of Mo addition and process parameters, Mo alloyed low carbon steels were prepared and thermomechanical controlled processes were simulated in the Gleeble system. The Mo addition resulted in an increasement of the grain coarsening temperature and suppress austenite recrystallization. The optimum condition for the refinement of austenite was obtained when the controlled rolling was performed twice with the same heat treatment condition, and reduction ratio of second pass was higher than that of first pass.
The study of anneal characteristics is important for TL dosimeter to reuse. To obtain the annealing condition of the recently developed, new TL dosimeter, LiF:Mg,Cu,Na,Si Teflon Tills in a disk type (diameter 4.5 mm, thickness about $90mg/cm^2$), we studied for pre-irradiation annealing, readout procedure and post-readout annealing, in order. The gamma irradiations were carried out with a $^{60}Co$, dose of 0.1 Gy. We have used the method that observe the variation of thermoluminescent(TL) intensity of these Teflon TLDs over repeated cycles by changing both anneal temperature and anneal time with the TLD reader and the oven. There is a 5% loss in sensitivity over the ten repeated readouts by the annealing condition:pre-irradiation annealing at $80^{\circ}C$ for one hour, readout to $280^{\circ}C$ and post-readout annealing at $270^{\circ}C$ for 20 seconds.
Proceedings of the Korea Information Processing Society Conference
/
2019.10a
/
pp.939-941
/
2019
단조는 강괴를 고온으로 가열하고 원하는 형상으로 만드는 공정이다. 가열로에 강괴를 장입하여 가열하고, 고온의 강괴에 프레스, 절단 공정을 적절히 반복하여 원하는 형상으로 만든다. 형상이 완성된 강괴의 경도 및 강도를 조절하기 위해 열처리 공정을 진행한다. 열처리로에 여러 개의 강괴를 장입하여 가열하기 때문에 에너지 비용이 많이 소모된다. 열처리 공정 비용은 열처리 공정의 종류와 장입되는 강괴들의 특성 및 수량 등에 따라서 결정된다. 열처리로에 장입할 강괴 조합을 최적화함으로써 비용을 최소화시킬 수 있다. 따라서 본 논문에서는 비용 예측 모형을 이용하여 열처리로 작업 계획을 최적화하는 방안을 제안한다. 비용 예측 모형은 IoT 인프라를 기반으로 수집한 공정 데이터를 이용하여 학습한다. 다양한 열처리로 작업 계획은 학습한 모형 기반의 시뮬레이션을 통해 평가하여 유전 알고리즘을 기반으로 최적화한다. 최적의 열처리로 작업 계획을 수립함으로써 공정 비용을 최소화하고 에너지 효율을 극대화할 수 있다.
Proceedings of the Materials Research Society of Korea Conference
/
2010.05a
/
pp.47.2-47.2
/
2010
1980년대 이후로 등장한 Nd-Fe-B 소결자석은 뛰어난 자성특성을 나타내며, 원재료도 풍부하기 때문에 단위 자기 에너지당 가격은 비교적 저가이다. 따라서 대부분의 기존 Sm-Co와 주조 Al-Ni-Co 자석재료를 대체하며 다양한 첨단사업의 핵심소재로 적용되며, 자동차 및 의료기기 등 산업 전반에 사용되고 있다. 이러한 응용 중에서도 향후 녹색성장을 위한 신성장동력 산업인 하이브리드 자동차의 구동 모터로서 사용되는 대표적인 영구자석이다. 현재 개발된 Nd계 영구자석은 큐리온도가 낮고 높은 온도에서 자기적 성능의 열화가 심하게 진행된다는 단점이 있기 새로운 합금 설계 및 공정의 최적화를 통해 보자력을 향상 시킴으로써 사용온도를 $200^{\circ}C$ 정도로 높이는 연구가 활발히 진행되고 있다. 본 연구에서는 일반적인 제조공정을 통해 제조된 소결체의 미세구조에 변화시키기 위하여 약 $10^{-5}$ Torr의 진공분위기에서 $10^{\circ}C/min$의 승온/냉각속도로 $350^{\circ}C$부터 $450^{\circ}C$ 구간에서 2 사이클부터 8 사이클까지 승온과 냉각을 반복하는 열처리를 수행하였다. Nd-Fe-B 소결자석을 $350^{\circ}C{\sim}450^{\circ}C$ 온도구간에서 반복적인 열처리를 수행한 결과 열처리 사이클에 따라 보자력 특성이 다르게 나타내었다. 이에 승온과 냉각을 반복하며 나타난 미세구조의 변화가 자성특성에 어떠한 영향을 미쳤는지에 대해 고찰하였다.
Kim, Han-Bin;Lee, Myeong-Hun;Kim, Yeon-Won;Kim, Dae-Yeong;Gang, Jun
Proceedings of the Korean Institute of Surface Engineering Conference
/
2018.06a
/
pp.137-137
/
2018
이 연구에서는 리튬이온전지용 음극 활물질의 리튬이온 저장 용량을 최적화시키기 위한 새로운 방법이 제안되었다. 그 방법은 솔루션 플라즈마 프로세스를 사용하여 원자 단위의 리튬을 탄소 기반 물질의 내부에 도핑 시키고, 열처리를 통해 그 내부를 재설계하는 것이다. 리튬이온전지용 음극 활물질로 리튬금속 자체를 사용하려는 시도는 있었으나, 이는 충전 및 방전 사이클이 반복됨에 따라 리튬이 수지상으로 석출되어 내부를 단락시키거나, 리튬금속 자체의 폭발성에 의한 취급상의 제약이 있었다. 한편, 원자 단위로 탄소 내부에 도핑 된 리튬은 열처리 과정 동안 탄소 내부에서 확산함으로써 더 많은 리튬이 저장될 수 있는 공간을 만들었고, 사이클이 반복됨에 따라 서서히 충전 및 방전 반응에 참여함으로써 전지의 성능을 개선시켰다. 리튬이 도핑 된 탄소의 전기화학적 테스트 결과를 Fig. 1에 나타내었다. 실험 결과에서 보여진 초기 고용량 및 장기 사이클 특성은 탄소 내부에 도핑 된 리튬이 전지 성능의 향상에 중요한 역할을 한다는 것을 시사한다. 또한, 사이클이 반복됨에 따라 점차 증가하는 용량은 첫 사이클에서 형성된 solid electrolyte interphase의 비가역 용량을 보상할 수 있을 것으로 생각된다. 이상의 결과를 통해, 탄소 내부에 원자단위의 리튬을 도핑시키는 새로운 접근은 리튬이온전지의 성능 개선을 위한 효과적인 방법이 될 수 있을 것으로 보이며, 향후 리튬 이외의 다른 원소들, 즉 소듐과 같은 물질에 대하여 도핑을 시도한다면 새로운 분야에서 이와 같은 접근법이 유용하게 적용될 수 있을 것으로 사료된다.
Kim, Sang-Hyoun;Han, Sun-Kee;Youn, Jong-Ho;Shin, Hang-Sik
Journal of the Korea Organic Resources Recycling Association
/
v.11
no.1
/
pp.70-76
/
2003
Continuous anaerobic hydrogen production with a mixed culture was investigated. With a sucrose concentration of 5g COD/L in the feed, hydrogen production exceeded $0.5mole\;H_2/mole\;hexose$ was found at the early stage, however it did not maintain longer than 9days. It was assumed that the failure was caused by insufficient active hydrogen producing bacteria in the reactor. Therefore, effects of pH control, repeated heat treatment and substrate concentration on sustainable continuous anaerobic hydrogen production was examined to find out operating conditions to sustainable hydrogen production. Decrease of hydrogen production was not overcome by only pH control at 5.3. Repeated heat treatment could recover hydrogen producing activity without any external inoculum supply. However, frequent heat treatment was needed because the treated sludge also showed the tendency in decrease of hydrogen production. With a sucrose concentration of 30g COD/L in the feed, hydrogen production maintained $1.0-1.4mole\;H_2/mole\;hexose$ in continuously stirred tank reactor and $0.2-0.3mole\;H_2/mole\;hexose$ in anaerobic sequencing batch reactor) for 24days. More than 90% of soluble organics in effluent was organic acids, in which n-butyrate was the most one.
졸-겔법(Sol-Gel Method)으로 강유전체 Bi/sub 3.3/La/sub 0.7/Ti/sub 3/O/sub 12/(BLT) 박막을 Pt/Ti/SiO₂/Si 기판위에 스핀 코팅하여 Metal-Ferroelectric-Metal(MFM 구조를 형성하였다. As-coated BLT 박막은 650℃ 이상에서 결정화되었으며, 전형적인 Bi층상의 페롭스카이트 결정구조를 나타내었다. 또한 열처리 온도를 증가시킴에 따라 결정성이 향상되었다. 3V 전압에서 650℃로 열처리된 박막의 경우 누설전류가 약 2.25×10/sup -8/A/㎠ 정도를 보였다. 650℃에서 열처리된 BLT박막은 5V의 인가 전압에서 잔류분극 2Pr(±(P/sup */-P/sup A/)) 값은 약 29.5μC/㎠을 나타내었으며, 1.5×10/sup 10/ 스위칭 cycles까지 분극 스위칭을 반복한 후에도 거의 잔류 분극의 변화가 없었다.
무산소동을 안정화 모재로한 Cu/Nb-Ti 빌렛트를 제작한 다음 간접 열간방식의 압출에 의해 얻어진 봉재를 인발한 후 신선과 열처리를 반복하여 단심 및 다심 Nb-Ti 초전도 선재를 제조하였다. 가공 조직을 조사한 결과, 단심 선재의 경우 Nb-Ti 심의 단면이 균일하게 가공된 것을 확인하였으며 다심선재의 경우는 신선가공에 의하여 다소 불균질한 필라멘트부분이 관찰되었다. 4.2K, 자장하에서 4단자법으로 직선형 단척시료의 임계전류를 측정하여 가공 열처리 조건에 따른 임계전류밀도의 자장특성을 조사하였는데 열처리시간을 길게하고 가공도를 높인 시료일수록 자장하의 임계전류밀도가 높게 나타나는 것을 확인하였다. 4.2K, 5T 자장하에서 각각 4 x $10^{5}$A/$cm^{2}$ 및 2 x $10^{5}$A/$cm^{2}$의 임계전류밀도를 나타내는 Nb-Ti 단심 및 다심 초전도선재를 제작 할 수 있었다.있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.