• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.753-757
• /
• 2003

In this paper, We propose an efficient iteration decoding control method with variable iteration decoding for iteration codes decoding. As the number of iterations increases, the bit error rate and frame error rate of the decoder decrease and the incremental improvement gradually diminishes. However, as the iteration decoding number is increase, it require much delay and amount of processing for decoding. Thus we propose variable iteration control method to adapt variation of channel using Frame Error-Check indicator. Therefore, the CRC method requires the fewest iterations and less computation than the CE method and the SCR methods.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.142-147
• /
• 2003

고분자 애자용 재료로 EPDM, 폴리에틸렌, 에폭시, 실리론 고무 등이 사용되고 있으며, 이중 실리콘 고무는 내후성, 내트랙킹성, 내아크성, 내환경성, 발수성등이 우수하다는 것이 많은 연구를 통해 밝혀졌다. 그러나, 옥외용 고분자는 다양한 환경에 의한 열화에 의해 낮은 인열강도를 나타내고 반복 열화에 따라 전기적 특성과 기계적 강도가 급격히 저하하는 단점을 가지고 있다.(중략)

• Science of Emotion and Sensibility
• /
• v.11 no.4
• /
• pp.553-564
• /
• 2008

Generalizability theory was employed to examine how the reliability of polygraph test is affected by the number of relevant questions, the number of repeated tests (the number of of charts), and the number of raters(scorers). The data consisted of the results of the polygraph tests administered to 31 crime suspects. The sample was drawn from the real polygraph tests based on Backster ZCT and archived by the Prosecutor's Office of the Republic of Korea. The numerical scores assigned by thirteen raters to the test charts were analyzed to determine the generalizability of the scores. The largest variance component was accounted for by the examinee factor(43.97%) and the residual variance component was 16.84% of the total variance. The variance component due to the interaction between the examinee and the chart factors was 12.17% and the variance component due to the three way interaction of the examinee, the repeated test, and the relevant question factors was 10.31%. The generalizability coefficient for the current measurement procedure as practiced by the Korean Prosecutor's Office was 0.74 which suggests that the current procedure is acceptable. However, measurement procedures with the combination of more than two relevant questions, more than three repeated tests, and more than two raters were generally found to yield generalizability coefficients larger than 0.80. Therefore, such procedures need to be considered seriously in order to significantly improve the reliability of polygraph test.

• The Korean Journal of Applied Statistics
• /
• v.23 no.3
• /
• pp.497-510
• /
• 2010

In medical practice and research, the problem of assessing reliability between two or more quantitative measures is quite common. Intraclass correlation coefficient(ICC) is commonly used to scale of reliability. Some methods were developed to calculate the required number of subjects, raters or replicates in one-way or two-way random ANOVA models. This paper, studies and compares the performance of four methods such as Walter et al. (1998), Giraudeau and Mary (2001), Saito et al. (2006) and Bonett (2002). In order to compare the efficiency of methods we compare the number of subjects, replicates and the width of confidence interval of ICC needed for some specific ICC values. In the case of subject size, Giraudeau's method is the best. In case of the number of replicates, Saito's method was superior to others. The width of confidence interval of ICC was narrower for Giraudeau's method than any others.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1811-1812
• /
• 2015

대형화, 복잡화 되어가는 대형 기계설비의 위험상황에 대한 실제 훈련은 소요시간 및 비용 증가, 훈련자 안전 확보의 어려움, 반복적인 훈련 및 평가가 어렵기 때문에 가상현실을 이용한 훈련 시뮬레이터가 대안으로 제시되고 있다. 본 논문에서는 대형 기계설비 안전대응 시뮬레이터에서 수행된 훈련에 대한 훈련자 피드백 및 평가를 위하여 개발된 시스템을 소개한다. 가상현실 기반 훈련 시뮬레이터에서 수행한 훈련결과 데이터를 활용하여 훈련 시나리오 내 임무수행 여부, 수행시간/거리에 대한 정량적 평가와 함께 훈련자의 훈련동작 데이터와 표준동작과의 비교를 통하여 효율적인 훈련을 위한 피드백을 수행할 수 있다. 또한 평가 결과의 시각화를 통해 직관적인 훈련개선이 가능하도록 하였다. 개발된 훈련평가 시스템을 활용하여 효과적인 훈련자 피드백 제공 및 반복적인 훈련 수행을 통한 안전대응 능력 향상이 가능할 것으로 판단된다.

• Journal of KIISE:Software and Applications
• /
• v.34 no.7
• /
• pp.585-594
• /
• 2007

The back propagation algorithm took a long time to learn the input patterns and was difficult to train the additional or repeated learning patterns. So Aleksander proposed the binary neural network which could overcome the disadvantages of BP Network. But it had the limitation of repeated learning and was impossible to extract a generalized pattern. In this paper, we proposed a dynamic 3 dimensional Neuro System which was consisted of a learning network which was based on weightless neural network and a feedback module which could accumulate the characteristic. The proposed system was enable to train additional and repeated patterns. Also it could be produced a generalized pattern by putting a proper threshold into each learning-net's discriminator which was resulted from learning procedures. And then we reused the generalized pattern to elevate the recognition rate. In the last processing step to decide right category, we used maximum response detector. We experimented using the MNIST database of NIST and got 99.3% of right recognition rate for training data.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.4
• /
• pp.56-67
• /
• 2004

This study analyzes human error of workers performing simple repetitive tasks, and in order to prepare preventative measures, 486 people were used as subjects. The results of the study are like the following. First, the biggest cause of human error showed to be the worker himself in $77.8\%$ of the cases, machinery showed to be the cause in $16.3\%$ of the cases and management showed to be the cause in $6.0\%$ of the cases. The results show that most of the human error occurred due to the worker performing simple repetitive tasks and the human errors showed to be caused more by bad ergonomics and long hours rather than by problems with machinery. In addition, the area with the highest rate of human error showed to be the Human Information Processing System with Task Input Error being the highest with $46.9\%$, followed by Judgement and Memory Error with $36.4\%$ and Recognition Verification Error with $16.7\%$. Although fully automated tasks may reduce the rate of human error we must focus on lowering the rate of problems arising from spontaneous errors caused by workers performing simple repetitive tasks by continuously renewing plans and budgets in order to standardize tasks by incorporating cyclic positioning according to experience and positional exchange and by inspecting the workplace to increase efficiency of the workers.

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.385-391
• /
• 2003

Lithium p-［Methoxyoligo(ethyleneoxy)］ benzenesulfonates (LiEOnBS) with different repeating unit of ethylene oxide were synthesized and were used for preparing gel-polymer electrolytes. The conductivities and lithium ion transference number were measured as a function of Li-salt concentration and repeating unit of ethylene oxide of the LiEOnBS. The maximum conductivity of the resulting gel-polymer electrolyte was found to be 4.89${\times}$10$\^$－4/ S/cm (LiEO7.3BS, 0.5 M) at 30$^{\circ}C$. The lithium ion transference number (t$\sub$Li$\sub$＋//) measurement were performed by means of the combination do polarization and ac impedance methods in gel-polymer electrolytes. Lithium ion transference number was measured to be in the range of 0.75∼0.92 for the LiEOnBS containing gel-polymer electrolytes. The maximum t$\sub$Li$\sub$＋// was obtained to be 0.92 for the 0.1 M LiEOnBS containing polymer electrolytes. The synthesized LiEOnBS showed single ion transport like characteristics when n was large than 3.

• The Korean Publising Journal, Monthly
• /
• s.142
• /
• pp.10-11
• /
• 1994

저명한 자서전 대필자가 유명인들의 책을 대필하는 게 통상적인 예로 통하는 외국과 달리 우리에게 대필자는 고스트라이터인 것이 현실이다. 하지만 저자나 독자에 대한 책임감 부여와 확인을 위해서라도 대필자의 기명은 필요하다. 은닉된 대필문화의 반복은 결코 바람직하지 못한 것이기 때문이다.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.270-278
• /
• 2001

Hydrogels for wound dressing were manufactured using poly(vinylalcohol)(PVA) and poly(N-vinylpyrrolidone)(PVP). The hydrogels were obtained by exposing to $^{60}$ Co${\gamma}$-rays after freezing and thawing of aqueous solutions of PVA and PVP to improve mechanical strength. Mechanical properties such as gelation, water absorptivity and gel strength were examined after repeating the \"freezing and thawing\" of PVA/PVP hydrogels, and then irradiating them at 40 kGy. The PVA/PVP ratio was in the range of 30:70 ~ 100:0, and the solid concentration of PVA/PVP was 20 wt%. The gelation and strength of hydrogels were much higher when \"freezing and thawing\" and the irradiation process were used than when only the irradiation process was utilized. In addition, the mechanical properties of PVA/PVP hydrogels after repetition of \"freezing and thawing\" are discussed. thawing\" are discussed.ssed.