• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5
• /
• pp.93-101
• /
• 2010

The demand for elastic pavement, providing comfort for pedestrians is expected to increase continuously but the lack of a standard for materials mixing ratio, that is, the optimal mixing ratio between ERDM chip and polyurethane binder, is still in a trial and error stage. This study aimed at recommending an optimal mixing ratio for elastic landscape pavement through a coherence and resilience test depending on ratio. The test result is outlined as follows. In a tensile strength test, samples B and C indicated a close positive relationship between the binder mixing ratio and tensile strength, indicating that the higher the mixing ratio the higher the tensile strength. In a hardness test, none of samples A, B or C indicated a statistical interrelationship between the binder mixing ratio and hardness. That is, the hardness of the elastic pavement material remained unchanged, irrespective of the binder mixing ratio. In a resilience lest, Samples A and B indicated a close negative interrelation between mixing ratio and resilience, indicating that the higher the mixing ratio, the lower the resilience. Upon analyzing the optimal mixing ratio based on test results, an increase in tensile strength began to slow at a 20% mixing ratio, while resilience began to reduce rapidly at 22%, Thus the optimal range for a mixing ration appeared to be 20~22%. The outcome of this study could to provide guidance for improving the elasticity and stability of elastic pavement.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.590-595
• /
• 2020

In this study, the small-scale collision experiments using a pendulum principle were carried out to evaluate the safety of the reinforced concrete building selected as a tsunami evacuation building due to the collision of the waterborne debris represented by ships. The experimental parameters were set as impact velocity, mass and length of the drifted ship. In this paper, the maximum impact force, impact duration, impact waveform and restitution coefficient affecting building response were investigated in detail. As a result, the impact force waveforms were distributed as a triangle in most of the experimental results, but became closer to a trapezoid as the length of the collision specimen increased. This is the very important result in calculating the momentum (impact waveform area) affecting building response, Furthermore, the restitution coefficients were constant regardless of the impact velocity, but they varied depending on the mass and length of the waterborne debris. However, the restitution coefficient for the mass per unit length of the waterborne debris can be evaluated.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.106-113
• /
• 1994

This paper deals with the magnetic forces of the combined levitation and guidance EDS(Electrodynamic Suspension) maglev system when the car bogie is tilted by the roll, pitch and yaw. The end effect on the magnetic forces are considered by calculating the air-gap flux without the assumptions for its pattern. Induced voltages and currents of the ground coils are given as results. The restoring torque due to roll, pitch and yaw of the bogie body are also examined. It has been shown that the end effect of the concentrically loaded vehicle are not negligible and the combined EDS is stable maglev system against disturbing forces.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.2
• /
• pp.95-101
• /
• 1991

The results of relationships between colloidal stability and soil pH on three Hawaii's volcanic ash soils developed under the three different rainfall conditions can be summarized as follows: 1. The Hilo soil only revealed the increase of colloidal stability by becoming for from Z.P.C point to either side of pH. 2. Hilo and Kawaihae soils, however, showed the increase of colloidal stability only in the higher pH range than their Z.P.C. 3. $P_2O_5$ drying procers decreased colloidal stability kof these soils because of so called irreversible drying characteristics of amorphous materials and the decrement was in order of: Akaka>Hilo>Kawaihae expressing positive correlation with content of amorphous materials in them. 4. The difference of colloidal stability curves among three soils can easily be interpreted by DLVO theory considering 0.1N-HCl amount added to decrease their soil pH, respectively. The addition of large amount of 0.1N-HCl into Akaka and Kawaihae soils did not effectively develop the positive charge but resulted in the shrink of diffuse double layer thickness inducing large attraction forces among soil particles.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.4
• /
• pp.271-276
• /
• 2012

In this study, the dispersion ability of powder in low viscosity solubilization system that depends on variety and amount of additives and powders was investigated. A PMMA powder shows outstanding dispersion ability because of its repulsive force of partially charged chain and low density of porous structure. A sample, which contains salts, showed better dispersion tendency than a sample without any additives. The dispersion ability was quantity of salts dependent. Furthermore, a sample with divalent ion salts, like $MgSO_4$, showed better dispersion tendency than that of monovalent ion salts, like NaCl or KCl. The reason for the better dispersion tendency was due to the existence of ionized salts around the powders which significantly improves repulsive force between powders and consequently reduces powder aggregation. The sample with chelating agent, like EDTA as an additive, had improved dispersion ability. EDTA chelates and blocks metal cation therefore anion's character is maximized and repulsive force between powders is improved. As a result, salts and EDTA help to improve the powder dispersion ability and the stability of product.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1896-1897
• /
• 2011

본 논문에서는 동적환경의 잠재적 위험 정의와 안전한 전역경로 계획 알고리즘을 제안 하였다. 대부분의 전역경로계획 연구는 시간과 거리의 비용을 최적화 시키는데 집중하고 있다. 하지만 동적환경으로 우리 주변에 많은 위험요소가 작용하고 있다. 본 논문에서 안전한 자율주행을 위한 경로계획방법으로 위험지역에 의해 정의 된 반발력과 S*알고리즘을 이용하여 안전하고 빠른 최적의 경로계획을 이루었다.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.75-82
• /
• 1997

기술의 발달로 인하여 인간이 사용하는 많은 공구들은 전동화되어 사용의 간편함과 아울러 작 업성능의 획기적인 변화를 이루었다. 그러나 이는 반대로 누적외상병이나 VWF(Viberation induced Whiter Finger)와 같은 새로운 문제점과 함께 중량의 증가로 인체에 더 많은 부하를 안겨 주는 부작용도 초래하고 있다. 현대의 많은 수공구들은 그 중량과 반발력을 지탱하기 위하여 대 부분 양손으로 작동하도록 설계되어 있느며, 제품의 성능의 향상에만 그 초점이 맞추어져 왔고 사용자의 안전과 편이성은 상대적으로 무시되어 왔다. 이에 본 연구에서는 이러한 양손공구의 인 간공학적 설계를 위한 체계적인 접근방식을 제시함으로써 산업디자인에 활용됨과 함께 유사한 제 품의 디자인에도 응용될 수 있는 바탕을 마련하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.125-130
• /
• 1988

This study presents a method to determine the ground reation forces of a quadruped walking machine on its foot ends caused by the body weight and the inertia forces from the commanded acceleration. The method shows the same result as the Pseudo-Inverse Method when the 4 feet stand on a plane. However method can be applied even when the 4 feet stand on a non-planar surface for which, no feasible solution can be obtained by the Pesudo-Inverse Method.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.454-456
• /
• 2014

ferroelectric perovskite의 ferroelectricity를 유지하기 위해서는 oxygen vacancy를 조절해야 한다. BTO의 경우 Ti-O(vacancy site)-Ti의 align 방향에 따라 두 종류의 vacancy가 존재하는데, Ti-O-Ti가 c-axis와 평행한 경우 BTO의 ferroelectricity가 약해진다. 본 연구에서는 BTO에 ab-biaxial strain을 가해 보고, 그 결과 두 종류의 vacancy formation energy가 어떻게 변화하는지 확인하였다. 그 결과 a, b-axis의 격자 상수가 증가하면 $V_b$가 $V_c$에 비해 안정해진다는 사실을 확인하였다. 이는 BTO의 oxygen vacancy의 vacancy site에 vacancy로 인해 남는 전자가 국지화되어 Ti-vacancy site 간 인력과 Ti-Ti간 반발력이 균형을 이룰 때 vacancy의 에너지가 낮아지기 때문이다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.593-596
• /
• 2001

It is necessary for calculation of repulsion forces acting on the closed electric contacts flowing over-current, e.g. inrush current and overload currents, to do optimum design of switching devices. In this paper, the farces and flux densities generated by currents at the contact point when circuit breakers are in closed state are obtained by using 3D finite element methode. To be convinced of the results, we measure electrogmanetic repulsion forces on contacts by measuring voltage between opened contacts in MCCB.