• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.97-102
• /
• 2011

본 연구에서는 원형 박판 구조물의 안정성에 대하여 해석 하였다. 임계하중은 하중을 점차적으로 증가하여 구조물이 파괴가 발생하여 안정성을 상실 하는 상태에서 가장 작은 하중을 의미한다. 판구조의 안정성을 임계하중의 크기로 기초를 두고 해석 하였다. 원형 박판구조의 차분해석은 일반 판구조와 같으므로 최근에 많은 연구의 대상이 되어왔다. 차분법은 복잡한 구조물에서도 물론, 다양한 경계조건을 포함하는 문제에 이르기까지 효과적인 수치방법이다. 본 연구에서는 기본 박판구조의 지배방정식을 유도하고 차분화 하여 직접적으로 접근하였다. 원 둘레 의 지점이 힌지 받침으로, 등분포 하중을 받고 있는 박판을 기하학적 비선형 해석으로 수행하여 원형 박판의 처짐 및 응력을 해석 하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.933-940
• /
• 2011

Thin sheets with a corrugated structure are generally used for the fabrication of heat exchangers for electronics, airplanes, and vehicles. However, it is difficult to fabricate corrugated structures, especially those with a bent angle, using the conventional stamping process because of its intrinsic formation mechanism. We propose a novel rubber-forming process for the effective pressing of the both tilted sides of a plate under the same pressure to form exact corrugated shapes. We use finite element analysis and experiments to study the rubber-forming process parameters, and we evaluate the maximum allowable bent angle for high-quality formation. We show that the proposed method is effective for the fabrication of bent plates with low cost.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.41-46
• /
• 2012

As the development of MEMS/NEMS structure and application technology the demand for an assessment of the mechanical properties have increased. The mechanical properties are mainly evaluated by using tensile test or ultrasonic wave measurement. However, the new technology have been developed such as nano-indentation, guided wave method because they have a limitation in case of a thin plate and thin film. In the study, the guided wave velocities are measured by electromagnetic-acoustic transducer(EMAT), the material properties of thin metallic foils are obtained using optimization process of the theoretical and experimental group velocity of guided wave. The Young's modulus obtained by the optimization process(201.6 GPa), nano-indentation(207.0 GPa) and literature value(203.7 GPa) of a $50{\mu}m$ thick nickel thin plate shows good agreement within 3%.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.407-421
• /
• 1998

The purpose of this paper is to provide and verify an analytical method, based on the spline finite strip method, which can be used to investigate the buckling mode and stress of thin-walled steel sections. Geometric imperfection and initial stress of plates and plate assemblies, which are resulted from various preloadings and may cause prebuckling deformations before buckling, are included in the analysis. Material nonlinearity and residual stress are also considered. It can be applied to sections with simple or non-simple boundary conditions and arbitrary loading. The method has been applied to investigate the buckling behavior of plates and plate assemblies which are subjected to compression with initial imperfections and residual stresses.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.53-53
• /
• 2004

최근 자동차/항공기 등의 판재나 구조물을 첨단기능성 재료로 제작하여 연료소비량을 감소시키는 동시에 승객의 안정성을 현저히 향상시키는 초경량/고강도/고강성/고내충격성 재료에 대한 연구가 활발히 수행되고 있다. 국내에서는 두개의 금속 박판사이에 3차원 금속 구조체를 대면적에 분포시킨 후, 판재와 구조체를 접합하여 재료의 무게를 현저히 감소시키는 반면 강도/강성/내충격성을 향상시키는 ISB(Internally Structured Bonded)판재 개발에 대한 연구가 시작되고 있다.(중략)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.3
• /
• pp.139-149
• /
• 2002

An explicit direct time integration method based solution algorithm is proposed to predict dynamic postbuckling response of thin plates. Based on the von Karman's plate equations and Marquerre's shallow shell theory, a rectangular plate finite element is formulated and utilized in this study. The element formulation takes into account geometrical nonlinearity and initial deflection of plates. The solution algorithm employs the central difference method. Using the computer program developed by the authors, dynamic postbuckling behavior of elastic thin plates under impact loading is investigated by considering the time variation of load and load duration. The efficiency of the proposed solution algorithm is examined through illustrative numerical examples.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.43-50
• /
• 1990

For constructing the steel structures of ship and automobiles etc, thin plate welding has been extensively used in recent years. However. the welding of plate produces welding deformation and residual stress which sometimes extremely harm to the safty of structure in the course of construction and operation. Therefore, in order to accurately prediet the welding deformation and residual stress, it is important to exactly analyze the distribution of temperature during welding in thin plate and take into account the moving effect of the heat source. In this paper, two dimensional unstationary heat conduction problemes of thin plate are formulated using an isoparametric finite element. After the development of the computer program, this method is applied to some specimens, and the analyzed results are compared with the experimental ones to confirm the usefulness of this method.

• Computational Structural Engineering
• /
• v.16 no.2
• /
• pp.71-78
• /
• 2003

• Journal of Korean Society of Steel Construction
• /
• v.29 no.4
• /
• pp.323-330
• /
• 2017

The pre-engineered building(PEB) construction has been gradually applied to single story buildings as a practical and efficient alternative to conventional buildings. However, there has been a few structure collapse due to suddenly excessive load. Although a structure design requires accurate and professional skills, the PEB system tends to be designed simply because of complexation of structural analysis for connections. This paper shows the finite element analysis(FEA) using ABAQUS software on bolted connection which was previously tested. The FEA condignly simulated the behavior of bolted connection in PEB system and was in close agreement with experimental results. Then the stiffness reduction factor of the bolted joints that can be used in the actual design is presented through the analysis of the joint parameters.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.6
• /
• pp.53-61
• /
• 1993

이 논문은 접은 도체박판의 단순한 구조가 전자유도형 변환기 역할을 한다는 것을 기술하고 있다. Endoh 등은 볼록한 나선코일과 동박판으로 구성된 볼록한 방사면 모양을 한 전자유도형 변환기가 시간적으로 짧은 충격파를 발생할 수 있기 때문에 뚜렷한 초음파 영상을 얻을 목적으로 Eisenmenger에 이어 전자유도형 EMAT를 보고한 바 있다. 여기서는 코일이 없는 EMAT를 소개한다. 이것은 두께 0.05mm, 폭 5cm 길이 임의의 동박판으로 구성되며 동박판은 절연도료를 칠한 종이로 절연되고 접어서 견고하게 밀착시키며, 여러번 접는 경우는 손부채처럼 접는 방향은 교대로 반대방향으로 접는다. 그리고는 엷은 고무판을 표면에 밀착시키고 연변을 실리콘 충전제등으로 고정시키거나, polyester molding을 하여 표면을 concave형으로 하여 완성하였다. 완성된 EMAT들은 수조에서 축전기방전방식으로 실험을 하였으나 EMAT에서 발생되는 으파의 진폭은 접는 회수에 비례하였으녀, 단접형 EMAT보다 다접형 EMAT의 발생음파가 보다 강력하였다. Concave형 EMAT의 음속은 예견한 바와 같이 잘 집속되었다. 그러나 평판형의 경우는 지향성은 100도로서 넓은 지향각을 나타내었다. 2μF, 600Volt의 축전기 방전에 의한 집속형 concave EMAT를 여기시키기 위한 축전기의 용량이 작을수록 대역폭은 더욱 넓었다.