• Membrane Journal
• /
• v.19 no.3
• /
• pp.194-202
• /
• 2009

In this study periodic water-back-flushing using permeate water was performed to minimize membrane fouling and to enhance permeate flux in advanced water treatment by tubular ceramic ultrafiltration membrane for Gongji stream in Chuncheon city. The back-flushing period (FT, filtration time) 2 min with periodic water-back-flushing of 15 sec showed the highest value of dimensionless permeate flux (permeate flux vs. initial permeate flux), and the lowest value of resistance of membrane fouling. Also in the results of BT effect at fixed FT 10 min, BT (back-flushing time) 20 sec showed the lowest value of resistance of membrane fouling and the highest value of dimensionless permeate flux, and we could be obtained the highest total permeate volume of 107.3 L. Consequently FT 10 min and BT 20 sec could be the optimal condition in Gongji stream water treatment, which was the exactly same results of our previous tubular alumina microfiltration. Then the average rejection rates of pollutants by our tubular ceramic UF system were 97.0% for turbidity, 32.1 % for chemical oxygen demand by manganese method, 28.8% for ammoniac nitrogen and 54.4% for T-P.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.2 s.29
• /
• pp.127-132
• /
• 2007

This study is to determine an optimal reservoir among many alternative proposals in order to obtain the maximized efficiency under the limited budget. There are many alternative proposals which deal with problems to assign reservoir such as water conversion establishment construction, subterranean water, reservoir, submarine pipeline, water boat, and marine water saving base construction. In this paper, the new model to assign the most reasonable alternative is introduced using 0-1 integer programming. This proposed model has not been applied in the optimal reservoir selection problem yet. This paper will contribute to determine the most reasonable alternative to minimize budget under constraints. Also, this proposal model can be applied to other reservoir selection problem in other regions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.90-97
• /
• 2009

The advantages of the orthogonal frequency division multiplexing (OFDM) are high spectral efficiency, resiliency to RF interference, and lower multi-path distortion. To further utilize vast channel capacity of the multiuser OFDM, one has to find the efficient adaptive subchannel and bit allocation among users. In this paper, we propose an 0-1 integer programming model formulating the optimal subchannel and bit allocation problem of the multiuser OFDM. We employ a dual-decomposition method that provides a tight linear programming (LP) relaxation bound. Simulation results are provided to show the effectiveness of the 0-1 integer programming model. MATLAB simulation on a system employing M-ary quardarature amplitude modulation (MQAM) assuming a frequency-selective channel consisting of three independent Rayleigh multi-paths are carried with the optimal subchannel and bit allocation solution generated by 0-1 integer programming model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.70-77
• /
• 2001

This paper present a fuzzy mxlel of describing reacton features for ozon contactor in advanced water treatn-ent systems. Input and output variables are chosen by considenng the object of ozon processing and several parameters related to management of water quahty. Dissolved organic carbon concentration, $UV_{254}$ absorptIon and $KM_NO_4$ consumption are proposed as common variables in input and outp.lt variables. Furthermore own concentration, raw water's temperature and contact time are suggested as input variables, Membership hmctions for input variables have triangular type share and the grades in each lrembership function are determined by investigating process data gathered at pilot planl The decision parts of fuzzy model have linear combination form of input variables and coefficients included in such linear equations are computedd with process clata in the sense of least square error Also fuzzy trodel suggested in this paper is partitioned by 3 independent fuzzy rnxlels using the characteristics of having no interactions armng output variables. As a result, such fuzzy mxlel has rrerits in computation and comprehension. According to simulatIon results, fuzzy moIel's outputs give almost similar data to process output under same input conditions.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.37-38
• /
• 2011

본 논문에서는 RT(Real Time)기반의 IPMSM(Interior Permanent Magnet Synchronous Motor) 설계 및 해석, 평가 플랫폼을 개발하고자한다. GUI(Graphical User Interface)로 제작 된 플랫폼 실행창에서 설계변수의 수치적 입력을 통해 설계 자동화를 구현하며, 수치해석프로그램 FEMM과 연동함으로써 전동의 전자계 해석 및 제어정수의 추출을 수행한다. 아울러 추출된 제어정수를 이용, Simulink의 실시간 시뮬레이션을 통해 IPMSM의 제어를 수행하여 통합적 설계 해석 평가를 도출한다.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.89-96
• /
• 2004

Many researches have been devoted to developing a model fur bridge scour analysis which can consider both of the erosive potential of flowing water and the relative ability of the soil to resist erosion. The scour rate apparatus that can quantify the erosion rate of the soil has been developed by virtue of the extensive efforts. The scour rate tests were performed on 3 types of the remolding clay samples using the scour rate apparatus. The erosion characteristics of the fine-grained soil samples according to the variation of the remolding loads are examined and the correlation between the soil properties and erosion rates is also analyzed. The results of the tests and analyses show that the soil properties, especially the dry unit weight and the shear strength of the soil have great influence on the erosion characteristics.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.271-277
• /
• 2011

An identification method of the structural damping matrix for a steel bar by the genetic algorithm is proposed. Supposing the damping matrix were in proportion to the stiffness matrix, the proportional factors can be identified from the curve fitting of the experimental frequency response function(FRF) by the genetic algorithm. Applying the identified damping matrix to FEM of a beam model, the values of the objective function could be reduced to about 1/60 in comparison with conventional FEM model without damping. The damping matrices of some sub-structures which have large damping partly could be identified by the algorithm, and they could be used as some parts of the FEM model for a whole structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.650-655
• /
• 2013

For the DC-free encoding of source data, the Guided Scrambling (GS) technique is widely used as multi-mode coding in the optical data storage system. For DC-suppression GS coding in the holographic data storage system, the conservative array and balanced coding criteria are proposed. In this paper, equivalent integer programming models are developed to determine the optimal control bits for the minimum digital sum value (MDSV), conservative array, and balanced coding criteria. Using the proposed integer programming models, we compare the performance of GS encoding for the various combination of control bit/array sizes and scrambling polynomials.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.95-98
• /
• 2006

Filtration by fibrous filter is one of the Principle methods used for removing pollutant particles in the liquid. Because of the increasing need to protect both human health and valuable devices from exposure to fine particles, filtration has become more important. Filters have been developed with modified surface charge characteristics to capture and adsorb particles by electrokinetic interaction between the filter surface and particles contained in water. The main purposes of this study are to develop and evaluate the performance evaluation of the apparatus for making a positively charged porous filter media and to analyze the surface characteristics of the filter media for capturing negavitely charged contaminants mainly bacteria and virus from water. The experimental apparatus consists of a mixing tank, a vacuum pumping system, a injection nozzle, a roller press and a controller. The filter media is composed of glass fiber(50-750 nm), cellulose($10-20{\mu}m$) and colloidal charge modifier. The characteristics of filter media is analyzed by SEM(Scanning Electron Microscopy), AFM(Atomic Force Microscopy) and quantified by measuring the zeta potential values.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.872-880
• /
• 2011

In terms of accessibility and time the tram rail and bus transportation system is equipped with all the benefits of. In addition, construction and operating costs than light rail trams reduce AGT, and by car from the city center by inhibiting the transport demand management, pedestrian-oriented transportation system, including city jaebuheung can expect several effects, depending on the expected introduction of trams are. Accordingly, increasing interest in streetcars and trams, and the forum is running and the green at the National Assembly, Korea Railroad Research Institute samurai tram lines in the Korean research team developed the tram is thriving. In this study, in Korea as a way to introduce a tram tram to enhance the safety and reliability challenges for the advancement and promotion of foreign tram with the safety regulations and accident cases learn safety measures to strengthen the domestic transportation. The expected introduction of the tram fits the matter at issue and the perception of citizens and the passengers can make changes to present policies, the successful national introduction of trams and safety study aims to review.