• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.3
• /
• pp.471-486
• /
• 2001

The principal trends in the course of emission control legislation are reviewed in this paper. In order to keep such a regulation, moreover, an inquiry ito the concrete technical possibility is conducted through review articles, Also, the composition of exhaust gases emitted from a marine diesel engine are investigated as several samples and the measures that can satisfy the value of regulation are handled with laying stress on the control methods discussed to date. It was concluded that various combined systems can be made to reduce NOx emissions without deteriorating substantially navigation costs since many technologies for reducing NOx emissions are being developed. All heat engines suffer from SOx emissions. There are two methods for reducing SOx emissions: desulfurization from exhaust gas and removal of sulfur composition from fuel oil. However it is necessary to watch the development of these technologies to evaluate which method is more favorable. Heat engines have a big problem in the regulation of environmental pollution from exhaust emissions. In the near future, however, diesel engines may be superior to other heat engines, owing to the high thermal efficiency, although the sales of individual models in dises engines may be prosperous and declining.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 1994.06c
• /
• pp.52-63
• /
• 1994

• Journal of the KSME
• /
• v.29 no.6
• /
• pp.586-593
• /
• 1989

국내 선박용 원동기연구는 1980년대에 들어서면서부터 엔진의 성능시험평가, 요소 기술개발연구, 소형엔진의 성능개량연구 등이 연구인력확보, 연구시설 확충 및 연구기반 구축과 병행하여 진행 되고 있다. 중. 대형엔진공장을 유치하여 생산공급하기도 급급했던 초기단계에서 수요확보를 위한 노력이 절실히 요망되었고, 또 부품 국산화, 수요자 요구에 부응키 위한 자체 능력향상은 가공생 산기술축적, 설계능력향상, 수리전문 기술자 및 AS등으로 도모되어 왔다. 외국 기술도입에 의한 생산의 장점-기술도입자체 외에도 세계적인 서비스 네트워크, 상표사용, 새로운 기술의 확보 등은 한국형 엔진 개발을 위한 연구를 도외시해 왔다. 한편 소형엔진에서는 어선 근대화 사업, 어민들 의 엔진성능인식이 상향됨으로써 새로운 고성능 엔진개발이 1980년대에 활발하게 진행되어 상당 한 진전을 보여 왔으며 고속엔진개발이나 대체에너지 이용 엔진개발에도 연구가 확대되고 있다. 본 글에서는 국내 박용 원동기 연구개발동향을 소개하기 위하여 국내 박용디젤엔진 산업과 연구 배경, 개발연구 등에 대한 내용을 실적 및 진행중인 과제를 위주로 요약 소개하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.2
• /
• pp.138-144
• /
• 2007

The variation of the crankshaft speed in a multi-cylinder engine is determined by the resultant gas pressure torque and the torsional deformation of the crankshaft. Under steady state operation, the crankshaft speed has a quasi-periodic variation. For the diagnosis the engine instantaneous speed versus crankshaft angle is utilized. This paper describes a simple measurement method of the engine instantaneous speed versus crankshaft angle using the teeth on the flywheel of the crankshaft. Two non-contacting magnetic pickup combinations detect the crank angle and TDC position for the data acquisition. The results from experiments on a 6 cylinder marine diesel engine demonstrate that the crankshaft speed variation are detected with good resolution. And the crankshaft speed variation is investigated according to the operation conditions. Also, it is confirmed that the engine output measured by EMS can be evaluated larger than the actual value due to TDC position error caused by instantaneous speed variation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.2
• /
• pp.200-208
• /
• 2002

The flash temperature of the cam-roller contacting surface for a marine diesel engine was analysed numerically. The elastohydrodynamic lubrication pressure and film thickness were adopted to get more accurate frictional coefficient, heat flux and temperature distribution. The maximum flash temperature was increased with both the increasing slip ratio of the contacting surfaces and increasing external load. This study tells that the temperature analysis is an indispensable procedure in designing elastohydrodynamic lubrication contacts on which the slip occurs.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.3
• /
• pp.70-78
• /
• 2000

The effects of recirculated exhaust gas on the characteristics of ;$NO_x$ and soot emissions under a wide range of engine load have been experimentally investigated by a water-cooled, four-cylinder, indirect injection, four cycle and marine diesel engine operating at two kinds of engine speeds. The purpose of the present study is to develop the EGR control system for reducing $NO_x$ and soot emissions simultaneously in diesel engines. The EGR system is used to reduce NOx emissions, and a novel diesel soot removal apparatus with a cylinder-type scrubber for the experiment system which has 6 water injectors(A water injector is made up 144 nozzles with 1.0mm in diameter) is specially designed and manufactured to reduce the soot contents in the recirculated exhaust gas to intake system of the engines. The intake oxygen concentration obtained by the intake air flow and the oxygen concentration in the recirculated exhaust gas, and the exhaust oxygen concentration measured in exhaust manifold are used to analyse and discuss the influences of EGR on NOx and soot emissions. The experiments are performed at the fixed fuel injection timing of $15.3^{\circ}$ BTDC regardless of experimental conditions. It is found that $NO_x$ emissions decrease and soot emissions increase owing to the drop of intake oxygen concentration and exhaust oxygen concentration as EGR rate rises. Also, one can conclude that it is sufficient for the scrubber EGR system with a novel diesel soot removal apparatus to reduce $NO_x$ emissions, but not to reduce soot emissions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.2
• /
• pp.1-17
• /
• 1994

잠수함추진방식은 크게 원자력 추진과 재래식 추진으로 나눌수 있다. 최근에는 재래식 추진방식과 하이브리드 개념으로 운용될 수 있는 AIP(Air Independent Propulsion)방식도 활발히 연구되고 있다. AIP추진으로는 폐회로 디젤기관추진(Closed Cycle Diesel Engine Propulsion), 연료전지추진(Fuel Cell Propulsion), 스터링기관추진(Stirling Engine Propulsion) 및 폐회로터빈추진(Closed Cycle Turbin Propulsion) 등이 있다. 이러한 잠수함 추진체계에 대해 앞으로 크게 세부분으로 나누어 그 현황과 발전추세를 살펴보고자 한다. 즉, 초기의 순수전기추진방식으로 불리는 재래식 추진체계, 재래식 추진방식의 한계를 극복하기 위해 최근 활발히 연구되고 있는 외기와 무관한 추진장치인 폐회로 추진체계, 그리고 궁극적으로는 에너지의 문제로 귀착되어 거의 무한대의 에너지원을 가지고 있는 원자력 추진체계로 구분하여 그 현황과 발전내용을 살펴 봄으로써 잠수함추진체계의 국내연구 개발방향정립에 조금이나마 보탬이 되었으면 합니다. 또한 차세대 추진장치로 불리는 전자유체 추진방식에 대해서는 한국박용기관 학회지 1993년 4월호 "박용전자유체(MHD) 추진장치"를 참조하시기 바랍니다.조하시기 바랍니다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.2
• /
• pp.38-49
• /
• 2000

A diesel engine has been studied for many years to improve fuel economy and to reduce emissions as important factors governing the emission performance of diesel engines. This study addresses to swirl effects on combustion characteristics in a large diesel engine. The transport equations of flows and chemical reactions are given for fully compressible fluid. The simulations have been done for compression and expansion strokes and the results are given at several crank angles which are the angles at just before injection start, TDC, ATDC 90 and just before exhaust valve open. The results show that the strength of the swirl flow makes many effects on burning fuel and forming emissions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.997-1002
• /
• 2012

Emission regulations have been strengthened step by step for marine engines. A noble measure is required both inside and outside of the combustion chamber. The combustion characteristics in cylinder have a very close relationship with the exhaust emission characteristics. Injection valve and nozzle hole geometry is an important factor for combustion. The study to improve the spray characteristics has concentrated on nozzle inlet geometry and nozzle hole diameter, but the exit geometry has not considered. In this study the nozzle exit angle variation was tested. The results show that the angle between $30^{\circ}$ and $60^{\circ}$ is more effective than the other cases.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.1
• /
• pp.30-38
• /
• 1993

In this study, the combustion characteristics in a pre-combustion chamber diesel engine was investigated with experimental conditions of marine engine load. The heat release analysis used was a single-zone single-chamber thermodynamic analysis based on pre-combustion chamber pressure-time data. Based on the results of this investigation, the following conclusions were reached: 1) Increasing the load, peak pressure was increased and position of P sub(max) was retarded in crank angle degrees. 2) Ignition delay time was almost constant without relating to the load and the heat values to form a combusitible mixture were decreased apparently with increasing the load. 3) In premixed-combustion mode, the pattern of heat release rate was resembled without relating to the load and premixed-combustion time was shortened with increasing the load. 4) Increasing the load, mass of premixed-burned fuel was increased slightly, but was invariable beyond a certain fuel-air ratio. 5) Increasing the load, premixed-burned fraction was decreased.