• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.1
• /
• pp.81-92
• /
• 2008

In this study, the analysis results were presented for the experimental data of sluice for tidal power generation that were installed in an open channel flume. The experiment was carried out for the six different sluice models of different widths and bottom heights of the sluice throat section. If the side shape of the sluice was the same, the coefficient of discharge generally increased by increasing the width of the throat section. However, when the water discharge was small and the upstream water level was low, the coefficient of discharge increased for a while but decreased later with the increase of the throat section width. In addition, the coefficient of discharge was larger when the bottom height of the throat section was higher, regardless of the width of the throat section. It was concluded that the values of coefficient of discharge that were frequently used in the previous feasibility studies were underestimated so that should be adjusted to higher values.

• Microbiology and Biotechnology Letters
• /
• v.38 no.2
• /
• pp.151-157
• /
• 2010

Barley malt produces two different $\alpha$-amylase isozymes (AMY1 and AMY2), which share up to 80% of amino acid sequence identity with each other. However, their enzymatic properties differ remarkably. In this study, five chimeric enzymes between AMY1 and 2 were constructed by staggered extension process (StEP) technique, and their enzymatic properties were characterized. According to the results, chimeric AMY-D2, D8, and E12 showed the mixed or intermediate types of calcium-dependent activity between AMY1 and 2. Meanwhile, only AMY-E10 chimera could be significantly inhibited by barley $\alpha$-amylase/subtilisin inhibitor (BASI) protein. Chimera AMY-C6 showed the same calcium-dependency as AMY1, while AMY-E10 was closely similar to AMY2. As a result, it can be proposed that some amino acid residues in the region II, III, and IV of barley $\alpha$-amylases can play very important roles in the interaction with BASI, and those in III, V, VI, and VII may partly affect on the calcium-dependent activity.

• Journal of Korea Technology Innovation Society
• /
• v.14 no.2
• /
• pp.320-342
• /
• 2011

This paper tries to analyze the evolution of technological innovative pattern in system semiconductor industry from the perspective of the evolution of way by which knowledge is generated and its related evolution of inter-firm relationships. In particular, this paper focuses on the evolution of knowledge after the emergence of EDA as a design tool, as a main momentum. As a result of analysis, we can find out following things. First, the innovative activities have evolved from design activity-centered technology development to innovative activities focusing on searching activities for utilizing knowledge and technology. Second, with rising value of knowledge, creation of new market utilizing knowledge, and development of new industry and new technology through inter-firm relationship had been made, in addition to strengthened specialized technological division of labor. Third, with focusing on utilization of knowledge, inter-firm network has taken diverse forms for building complementary platform for co-development. This discussion can give an insight on the necessity of utilizing inter-firm network strategically and setting strategies for enhanced searching activities such as market creation and knowledge utilization.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.3
• /
• pp.229-243
• /
• 2013

An in situ solute migration system was designed and installed in KAERI Underground Research Tunnel (KURT) constructed in the site of Korea Atomic Energy Research Institute (KAERI) in order to investigate the migration and retardation of non-sorbing and sorbing tracers through a rock fracture. The system is composed of three main parts including injection, extraction, and data treatment. For the selection of a water-conducting fracture, boreholes were drilled. The fractures in the drilled boreholes were investigated using borehole image analysis using borehole image processing system (BIPS). The results of BIPS analysis showed that borehole YH 3-1 and YH 3-2 were connected each other. Moreover, hydraulic tests were carried out to determine the test section with connectivity for the in situ experiments. The in situ solute migration experiments were accomplished to understand the migration of solutes through fractures in KURT using non-sorbing tracers which were fluorescein sodium, eosin-B, bromide and sorbing tracers which were rubidium, nickel, zirconium, and samarium.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.580-586
• /
• 2017

The establishment of big data service environment requires both cloud-based network technology and clustering technology to improve the efficiency of information access. These cloud-based networks and clustering environments can provide variety of valuable information in real-time, which can be an intensive target of attackers attempting illegal access. In particular, attackers attempting IP spoofing can analyze information of mutual trust hosts constituting clustering, and attempt to attack directly to system existing in the cluster. Therefore, it is necessary to detect and respond to illegal attacks quickly, and it is demanded that the security policy is stronger than the security system that is constructed and operated in the existing single system. In this paper, we investigate routing pattern changes and use them as detection information to enable active correspondence and efficient information service in illegal attacks at this network environment. In addition, through the step-by -step encryption based on the routing information generated during the detection process, it is possible to manage the stable service information without frequent disconnection of the information service for resetting.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.327-334
• /
• 2007

The purpose of this study was to evaluate the effect of burs on microleakage of Class V resin restorations when a self-etching primer adhesive was used. Forty Class V cavities were prepared with four different cutting burs on extracted third molars, and divided into one of four equal groups (n = 10); Group 1-plain cut carbide bur (no. 245), Group 2-cross cut carbide bur (no. 557), Group 3-fine diamond bur (TF-21F), Group 4-standard diamond bur (EX-41). The occlusal and gingival margin of cavities was located in enamel and dentin, respectively. Cavities were treated with Clearfil SE Bond and restored with Clearfil AP-X. Specimens were thermocycled, immersed in a 2% methylene blue solution for 24 hours, and bisected longitudinally. They were observed leakages at enamel and dentinal margins. Data were analyzed using Mann-Whitney and Wilcoxon signed ranked test. The results of this study were as follows; 1. At enamel margin, microleakage of group 4 was statistically higher than those of group 1, 2 and 3 (p < 0.01). 2. At dentinal margin, microleakage of group 4 was statistically higher than group 3 (p < 0.01), but group 1 and 2 were not statistically different with group 3 and 4. 3. Enamel microleakage was statistically higher than dentinal microleakage in group 1, 2 and 3 (p < 0.05), but statistical difference between the microleakage of enamel and dentinal margin was not in Group 4. In conclusion, the use of coarse diamond bur showed high microleakage at both enamel and dentinal margin when Clearfil SE Bond was used in class V cavity.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.1
• /
• pp.34-45
• /
• 2014

A variety of physical, chemical, and microbiological techniques have been developed to deal with soil and groundwater contamination. However, in the presence of the large portion of soil micro-environments, contaminant rebound and/or tailing have been frequently reported. Case study of total petroleum hydrocarbons (TPH) removal by full-scale land farming showed that contaminant rebound and/or tailing occurred in 9 out of total 21 cases and subsequently resulted in problems of a long term operation to satisfy TPH guidelines of contaminated soil and groundwater. The main cause of contaminant rebound and tailing is considered to be the strong interactions between contaminants and micro-environments including micro-particles, micro-pores, and organic matter. Thus, this study reviewed the effects of soil micro-environments of soil and groundwater on the removal efficiency for both heavy metals and petroleum contaminants. In addition, the various methods of sampling, analysis, and assessment of soil micro-environments were evaluated. Thorough understanding of the effects of soil micro-environments on contaminant removal will be essential to achieve a cost-effective and efficient solution to contaminated sites.

• Korean Journal of Poultry Science
• /
• v.32 no.4
• /
• pp.269-273
• /
• 2005

The wild ginseng culture by-products(WGCB) was added to the laying hens diets. A total of 420 Lohmann Brown laying hens were alloted to five levels of drinking water containing WGCB 0, 0.4, 0.8 1.6, $3.2\%$with seven replications and fed com-soybean meal based diets contained ME 2,800 kcal/kg, CP $16\%$. Laying Performance, egg quality, egg yolk fatty acid and cholesterol concentration were measured. Egg Production and daily e99 mass were significantly lower(p<0.05) in birds fed the WGCB $3.2\%$ compared with no WGCB group, but showed no significant effect in other treatments. Feed efficiency of birds fed $0.4\%$ WGCB showed the lowest of all treatments(p<0.05). Eggshell thickness was increased(p<0.05) by WGCB supplementation, whereas eggshell breaking strength, haugh unit and yolk color index were not affected. No significant change in yolk fatty acids and cholesterol were observed by the addition of WGCB.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.5
• /
• pp.269-273
• /
• 2005

A field experiment was conducted to evaluate the effect of slow-release fertilizer on the yield and quality of the third-harvest tea leaves. The yield of the third harvested tea leaves was decreased to 5.8-14.4% in slow-release fertilizer block, except to the N $50kg\;10a^{-1}$ ($316kg\;10a^{-1}$), compared to traditional urea treatment ($313kg\;10a^{-1}$). Nitrogen uptake and nitrogen uptake efficiency of slow-release fertilizer was reduced as nitrogen application level increased. The contents of chemical components related to the tea quality such as total-nitrogen, total amino acid, chlorophyll and theanine were somewhat lower in the slow-release fertilizer treatments, except to the treatment of N $50kg\;10a^{-1}$, than those in the traditional urea application, but those of tannin, caffeine and vitamin C were not different among the treatments. In scoring test, apparence and quality of green tea of the slow-release fertility treatments were not different, except to the N $40kg\;10a^{-1}$ treatment, compared to those in the treatment of urea. In conclusion, slow-release fertilizer and conventional urea treatments showed not different in both yield and quality of green tea.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.554-560
• /
• 2012

Recently, it has been increasing trend to use conductive materials as electronics and communication technology in electronics industry are developing. The noble metal such as Ag, Pt, Pd etc. are mostly used as conductive materials, To reduce production cost, alternative materials with similar characteristics of noble metals are needed. Copper has advantages, i.e its electronic properties are similar to noble metals and low cost than noble metal, but its use has been restricted because of oxidation in air. In this study, the tin film was coated on copper by electroless plating to protect copper from oxidation and to confirm the effects of temperature, pH, amount of $SnCl_2$, and feeding speed in plating conditions. Additionally, we apply $Cu_{core}Sn_{shell}$ powder as conductive filler with low-temperature densification and analysis by SEM, XRD, FIB and 4-Point Probe techniques. As result of the study, tin film was coated well on copper and was protected from oxidation. After low-temperature densification treatment, the meted tin made chemical interconnections with copper. Accordingly, conductivity was increased than before condition. We hope $Cu_{core}Sn_{shell}$ powder to replace noble metals and use in the electronic field.