• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.351-361
• /
• 2007

The samples composed of a GST thin film and the protective layers of $ZnS-SiO_2$ or $Al_2O_3$ coated on c-Si substrate were prepared by using the magnetron sputtering method. Samples of three different structures were prepared, that is, i) the GST single film on c-Si substrate, ii) the GST film sandwiched by the protective $ZnS-SiO_2$ layers on c-Si substrate, and iii) the GST film sandwiched by $Al_2O_3$ protective layers on c-Si substrate. The ellipsometric constants in the temperature range from room temperature to $700^{\circ}C$ were obtained by using the in-situ ellipsometer equipped with a conventional heating chamber. The measured ellipsometric constants show strong variations versus temperature. The variation of ellipsometric constants at the temperature region higher than $300^{\circ}C$ shows different behaviors as the ambient medium is changed from in air to in vacuum or the protective layers are changed from $ZnS-SiO_2$ to $Al_2O_3$. Since the long heating time of 1-2 hours is believed to be the origin of the high temperature variation of ellipsometric constants upon the heating environment and the protective layers, a PRAM (Phase-Change Random Access Memory) recorder is introduced to reduce the heating time drastically. By using the PRAM recorder, the GST samples are heated up to $700^{\circ}C$ decomposed preventing its partial evaporation or chemical reactions with adjacent protective layers. The surface image obtained by SEM and the surface micro-roughness verified by AFM also confirmed that samples prepared by the PRAM recorder have smoother surface than the samples prepared by using the conventional heater.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.107-119
• /
• 1991

This dissertation analyzes the running mechanism of flexible and thin tape above rotating head through the experiment. The scope of study is confined to measure the vertical deformation of running tape under hydrodynamic pressure invoking phenomena of elasto-hydrodynamic lubrication between the protruded bump on a rotating cylinder ad the running tape. Experimental system is devised to measure the vertical deflection of the running tape by opto-electronical displacement gauge, which enables to detect microscopic surface deflection of high frequency. Thorough the tests of small specimens of groove and bump, the accuracy and reliability of this experimental method is confirmed and achieved an accuracy within 5%(2.mu.m) error for the microscopic deflection with high frequency. In experimental works, the effects of bump size on flying characteristics of the tape were evaluated and examined. For the vertical deformation of the running tape. the numerical results and its trend agree qualitatively with the experimental ones.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2002.11a
• /
• pp.502-511
• /
• 2002

컴퓨터의 기술적 발전은 사회 여러 분야에 막대한 영향을 끼쳤다. 그중 악보 인식분야에도 커다란 영향을 주었다 그러나, On-line 상에서 그린 악보를 실시간으로 정형화된 악보형태로 변환하는 처리에 대한 연구가 미흡하여 이에 대한 연구가 필요하다. 본 논문에서는 실시간으로 악보를 인식하고, 사용자의 편의를 도모하기 위해 DP(Dynamic Programming) 매칭법을 이용한 On-Line 악보인식에 관한 방법을 제안하였다. 본 연구에서는 실시간으로 입력되는 악상기호를 인식하기 위해, 가장 유효한 정보인 악상 기호내의 방향, x, y 좌표를 이용하여 벡터형태로 추출한 후 음표와 비음표(쉼표, 기타기호)의 두개의 그룹으로 나누어진 표준패턴과의 DP매칭을 통해 인식한다. 먼저 tablet을 통해 실시간으로 악상 기호를 입력할 때 생기는 x, y좌표를 이용하여, 펜의 움직임에 대한 16방향 부호화를 수행한다. 음표와 비음표를 구분하기 위한 시간을 줄이고자 16방향 부호화를 적용하치 않고 사사분면부호화를 적용한다. 음표를 약식으로 그릴 경우 음표 머리에 해당하는 부분의 좌표는 삼사분면에 분포하고, 폐곡선의 음표일 경우에는 좌표가 사사분면에 고르게 나타난다. 폐곡선을 제외한 음표의 머리는 폐곡선과 같은 조건이면서 입력받은 y좌표값들 중에서 최소값과 최대값을 구한 다음 2로 나눈 값을 지나는 y좌표의 개수가 임의의 임계값 이상이면 음표로 판단한다. 위 조건을 만족하지 않을 경우 비음표로 취급한다. 음표와 비음표를 결정한 다음, 입력패턴과 표준패턴과의 DP매칭을 통하여 벌점을 구한다. 그리고 경로탐색을 통해 벌점에 대한 각각의 합계를 구해 최소값을 악상기호로 인식 하였다. 실험결과, 표준패턴을 음표와 비음표의 두개의 그룹으로 나누어 인식함으로써 DP 매칭의 처리 속도를 개선시켰고, 국소적인 변형이 있는 패턴과 특징의 수가 다른 패턴의 경우에도 좋은 인식률을 얻었다.r interferon alfa concentrated solution can be established according to the monograph of EP suggesting the revision of Minimum requirements for biological productss of e-procurement, e-placement, e-payment are also investigated.. monocytogenes, E. coli 및 S. enteritidis에 대한 키토산의 최소저해농도는 각각 0.1461 mg/mL, 0.2419 mg/mL, 0.0980 mg/mL 및 0.0490 mg/mL로 측정되었다. 또한 2%(v/v) 초산 자체의 최소저해농도를 측정한 결과, B. cereus, L. mosocytogenes, E. eoli에 대해서는 control과 비교시 유의적인 항균효과는 나타나지 않았다. 반면에 S. enteritidis의 경우는 배양시간 4시간까지는 항균활성을 나타내었지만, 8시간 이후부터는 S. enteritidis의 성장이 control 보다 높아져 배양시간 20시간에서는 control 보다 약 2배 이상 균주의 성장을 촉진시켰다.차에 따른 개별화 학습을 가능하게 할 뿐만 아니라 능동적인 참여를 유도하여 학습효율을 높일 수 있을 것으로 기대된다.향은 패션마케팅의 정의와 적용범위를 축소시킬 수 있는 위험을 내재한 것으로 보여진다. 그런가 하면, 많이 다루어진 주제라 할지라도 개념이나 용어가 통일되지 않고 사용되며 검증되어 통용되는 측정도구의 부재로 인하여 연구결과의 축적이 미비한 상태이다. 따라서, 이에 대한 재고와 새로운 방향 모색이 필요하다고 사료된다.로 사료되며, 임신관련 cytokine에 대한 다양한 연구가 요구되고 있다.₂/Hf(Variable)/Si 계에서 HfO₂ 박막이 Si 기판위에 직접 증착되면, 순수 HfO₂ 박막의

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.89-94
• /
• 2016

This study was conducted to determine the optimum nutrient solution, pH, irrigation interval, light intensity and planting density to growth of common ice plant (Mesembryanthemum crystallinum L.) in a closed-type plant production system. Three-band radiation type fluorescent lamps with a 12-h photoperiod were used. Nutrient film technique systems with three layers were used for the plant growth system. Environmental conditions, such as air temperature, relative humidity and $CO_2$ concentration were controlled by an ON/OFF operation. Treatments were comparison of the nutrient solution of Horticultural Experiment Station in Japan (NHES) and the nutrient solution of Jeju National University (NJNU), pH 6.0 and 7.0, irrigation interval 5 min and 10 min, light intensity 90 and $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, and within-row spacing 10 cm, 15 cm, 20 cm and 25 cm with between-row spacing 15 cm. Optimum macronutrients were composed N 7.65, P 0.65, K 4.0, Ca 1.6 and Mg $1.0mM{\cdot}L^{-1}$. There were no significant interactions between pH 6.0 and 7.0 about shoot fresh weight and shoot dry weight of common ice plant. Irrigation interval 5 min and 10 min was also the same result. Shoot fresh weight and shoot dry weight were highest at $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Shoot fresh weight and shoot dry weight were decreased according to increasing the planting density. From the above results, we concluded that optimum nutrient solution, optimum levels of pH, irrigation interval, light intensity and planting density were 6.0-7.0 and 10 min, $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and $15{\times}15cm$, respectively for growth of common ice plant in a closed-type plant production system.

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.190-197
• /
• 1997

This study was conducted to determine the optimum hydroponic system and nutrient solution for promoting the growth and flowering of hydroponically grown carnation. DFT (deep flow technique) and NFT (nutrient film technique) systems were employed and four kinds of nutrient solution, which are Cooper solution, Yamasaki solution, balanced nutrient solution by Japanese Horticultural Experiment Station and PTG solution in the Netherlands were used and compared. pH was lowest in the PTG solution compared to the other nutrient solutions used. Plant height was highest in the DFT system in the plot of PTG solution as of 53.0 cm at 88 days after transplanting, while lowest in NFT system with Cooper solution. Stem diameter was more thickened in NFT system with PTG solution as of 7.2 mm at 88 days after transplanting. Days to flowering was shortened to 122.3 days in NFT system when PTG solution was used. This results suggested a combination of NFT system with PTG solution as optimum hydroponic system and nutrient solution for cut carnation production. Further trials as to the management of nutrient solution by glowing stages should be followed.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.104-109
• /
• 2019

The crops recommended for the plant factory system are diverse. The importance of planting density in the plant factory is being recognized. The objective of this study was to determine the optimal planting density for growth and quality of kohlrabi in a closed-type plant factory system. The kohlrabi was grown under fluorescent lamps and nutrient film technique system. The growth and quality of kohlrabi were investigated under four different planting densities ($22plants/m^2(15{\times}30cm)$, $27plants/m^2(15{\times}25cm)$, and $33plants/m^2(15{\times}20cm)$). There were no significant interactions between Shoot fresh and dry weights per plant or bulb stem fresh and dry weights per plant and planting density. Shoot fresh and dry weight per area or bulb stem fresh and dry weight per area were the highest at $33plants/m^2$. There were no significant interactions between plant height, leaf area, photosynthetic rate, hardness, and chlorophyll content and planting density. Significant differences in Bulb stem height and diameter, and brix were observed. Bulb stem height and diameter and brix of kohlrabi were the highest at $22plants/m^2$. Based on our results, we conclude that the optimal planting density is $33plants/m^2$ for growth of kohlrabi, however, the optimal planting density is $22plants/m^2$ for quality of kohlrabi in a closed-type plant factory system.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.291-297
• /
• 2013

The objective of this study was to know the growth response and light use efficiency of leaf lettuce (Lactuca sativa L.) 'Yorum Cheongchukmyeon' (green leaf lettuce) and 'Hongyom Jeokchukmyeon' (red leaf lettuce) under different RGB (Red:Green:Blue) ratio in a closed-type plant factory system. The plants were hydroponically cultured with a 12-h photoperiod at $20{\sim}25^{\circ}C$, 60~70% RH and 600~900 ${\mu}mol{\cdot}mol^{-1}$ $CO_2$. The light treatments were combined in three colors LEDs (red, blue, and white) and RGB ratios (1 : 4 : 5, 5 : 0 : 5, 5 : 2 : 3, 7 : 0 : 3, 7 : 1 : 2, and 8 : 1 : 1), however, as the light intensities of treatments were different. Growth characteristic response in both lettuces were significantly as affected by interaction between cultivar and light quality, when they were grown under different light quality conditions. Plant heights of green and red leaf lettuce were the lowest in 1 : 4 : 5 and 8 : 1 : 1, respectively. The highest length and number of leaf were showed 8 : 1 : 1 and 7 : 0 : 3 for the green and 5 : 2 : 3 and 8 : 1 : 1 for the red, respectively. Shoot dry weights of green and red leaf lettuce were the heaviest in 7 : 0 : 3 and 8 : 1 : 1, respectively. Leaf width and leaf shape index were significant about cultivar and light quality. Leaf widths of green and red leaf lettuce were the largest in 8 : 1 : 1 and 5 : 2 : 3, respectively. Leaf shape index of green and red leaf lettuce were the largest in 1 : 4 : 5 and 1 : 4 : 5, respectively. Shoot fresh weight and light use efficiency were significant about cultivar and light quality. Shoot fresh weights of green and red leaf lettuce were the heaviest in 7 : 0 : 3 and 8 : 1 : 1, respectively. Light use efficiencies of green and red leaf lettuce were the highest in 7 : 0 : 3 and 5 : 0 : 5, respectively. These results suggested that the ratio of RGB was 5~7 : 0~2 : 1~3 to cultivate leaf lettuce in a plant factory system.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.305-311
• /
• 2012

To investigate the influence electrical conductivity (EC) of nutrient solution and light intensity on growth of red leafy lettuce, fresh and dry weights, number of leave, chlorophyll concentration and production efficiency were evaluated through nutrient film technique system. The levels of EC were 0.5, 1.0, 1.5, 2.0, 3.0, and $6.0dS{\cdot}m^{-1}$, and those of light intensity were 120, 150, and $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Under photoperiod of 16 h/day, the temperature was maintained in the range of $20{\sim}25^{\circ}C$. Planting density was $10{\times}10cm$ (100 plants/$m^2$). When red leafy lettuce were grown in the EC range of $0.5{\sim}1.5dS{\cdot}m^{-1}$, the fresh and dry weights decreased as the EC levels and light intensity were lowered, however, Hunter's a value showed no significant differences among the treatments of EC and light intensity levels (Ex. 1). The fresh and dry weights and production efficiency ($g{\cdot}FW/kw$) were the highest in the treatment of $3.0dS{\cdot}m^{-1}$ and $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ when crops were grown under the EC range of EC $1.5{\sim}6.0dS{\cdot}m^{-1}$ (Ex. 2). But the fresh and dry weights, number of leaves, and production efficiency of $2.0dS{\cdot}m^{-1}$ were the highest when the light intensity was $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ (Ex. 3). The SPAD value increased gradually as EC levels were elevated. From the above results, we concluded that optimum levels of EC and light intensity were $2.0dS{\cdot}m^{-1}$ and $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively, for production as well as production efficiency of red leaf lettuce in plant factory.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.180-187
• /
• 2022

In order to select suitable light in a plant factory, electric energy use efficiency and light use efficiency should be considered simultaneously to consider operating costs as well as quantitative and functional aspects. The growth characteristics, electric energy use efficiency, light use efficiency by light intensity, LED ratio, and photoperiod conditions were compared together. Light intensity is 60, 130, 230, and 320 µmol·m^-2·s^-1 treatments, and light quality is the mixing ratio of red light and blue light 8:2, 6:4, 4:6, and 2:8 treatments. Photoperiod is 9, 12, 15, and 18 hours treatments based on the daytime. In the light intensity experiment, the growth rate increased as the light intensity increased, but there was no significant difference in the light use efficiency. When comparing the leaf fresh weight per power consumption, only the 320 µmol·m^-2·s^-1 treatment group showed significantly low efficiency, and there was no significant difference in the other treatments, so 230 µmol·m^-2·s^-1, which produced the most, was the most efficient. In the light quality experiment, the ratio of red light and blue light was measured to be high at the same time as the growth rate and light use efficiency in RB 8:2, and there was no significant difference in color difference and flavonoids content, so a Red:Blue ratio of 8:2 was the most suitable condition. In the photoperiod experiment, the longer the photoperiod, the higher the growth rate. However, there was no significant difference in the growth rate over 12 hours of daytime, so 12 hours considering the light consumption efficiency was a suitable condition. Based on the above results, LED light environmental conditions for perilla growth in plant factories were light intensity, light quality, and day length of 230 µmol·m^-2·s^-1 or more, 8:2, and 12 hours or more, respectively.