• Journal of fish pathology
• /
• v.11 no.1
• /
• pp.35-41
• /
• 1998

We investigated the optimal concentration of lidocaine and MS-222 (tricaine methanesulfonate) for the exfoliation and recovery of abalone, Haliotis discus hannai in different shell lengths, for the purpose of preventing the damage of shell and muscle. However, most anaesthetics applied at present have a strong toxic effect on abalone. MS-222 is the only anaesthetic which is approved for use in food fish by FDA, and lidocaine belongs to a group of anaesthetic which are used in human medicine. These chemicals were evaluated as anaesthetic for different shell size of abalone. The response varied for different shell size groups (shell length 1, 2 and 3 cm). In this study, we suggested the result that the exfoliation and recovery time by lidocaine and MS-222 in shell length 1 cm group were more shorter than in 3 cm group. In shell length 1 cm group, the optimal concentrations of lidocaine and MS-222 for anaesthetic were 200 ppm and 100 ppm, respectively. Lidocaine and MS-222 are preferable to other conventional abalone anaesthetics since these are cheap, safe and convenient to use.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.105-116
• /
• 2001

This study was performed to evaluate the characteristics of waste foundry sand (WFS) and the asphalt mixture made of a foundry waste sand. To estimate the applicability of WFS, chemical and physical properties were measured by XRF(X-ray fluorescent), and SEM(Scanning electronic microfilm). To improve the stripping resistance of WFS asphalt mixture, anti-stripping agents (a hydrated lime and a liquid anti-stripping agent) were used. To improve tensile properties and durability of WFS asphalt concrete mixture, LDPE(low-density polyethylene) was used as an asphalt modifier Marshall mix design, indirect tensile strength, tensile strength ratio(TSR) after freezing and thawing, moisture susceptibility and wheel tracking tests were carried out to evaluate performance of WFS asphalt concrete. Comparing with conventional asphalt concrete, WFS asphalt concretes showed similar or the better qualify in mechanical properties, and satisfied all specification limits. Therefore, it Is concluded that waste foundry sand can be recycled as an asphalt pavement material.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.449-452
• /
• 2008

This study is to manufacture HSCC (High flowing Self-Compacting Concrete) be able to construction without vibration & hardening, and it is stable according to the change of the surface number of aggregate and to examine the factor of reduction occurred before after hardening through the indoor experiment. It is essential to use of the thickener to increase the viscosity in the combined HSCC. In this result, it make more bubbles than HSCC of pulverulent body. The result of study has shown, through the surface air bubble by not passed air bubbles within concrete after hardening, It has bad effect in not only appearance of structures but strength & duration. It is the experiment for air bubble of concrete according to the types of aggregate (fine aggregate), mixing time of concrete, exfoliation, material of model form and so that reduce the air bubble of combined HSCC. Experiments have shown, the effect of exfoliation was bigger than the effect of form for the performance of surface finishing of combined HSCC after hardening according to the exfoliation or material of model form and the opaque guris has good condition of finishing.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.80.2-80.2
• /
• 2012

그라핀(graphene)은 탄소 원자의 2차원 육각형 $sp^2$ 결합체로서 탄소 나노구조체가 가지는 여러 가지 우수한 특성을 보유하면서 대면적 기판 위에서 소자구현 및 투명전극 등으로의 우수한 응용성 때문에 고품질 그라핀 제조와 물리적 특성, 소자응용에 관한 연구가 활발히 진행되고 있다. 최근 그라핀 제조를 위한 여러 가지 방법이 개발되고 있으나 화학적 박리법이 저비용으로 대량생산을 위해 가장 유리한 방법으로 주목을 받고 있다. 화학적 박리법은 벌크 그라파이트를 강한 산을 이용하여 산화시켜 형성된 산화 그라파이트(graphite oxide)을 열적으로 팽창시켜 박리하고 환원하여 그라핀으로 제조하는 것이다. 보통 열적팽창을 위해서 열처리 로를 사용하게 되는데, 본 연구에서는 박리를 보다 효율적으로 진행시키고 고품질의 그라핀을 얻기 위해 마이크로웨이브를 이용한 박리법을 적용하였다. 마이크로웨이브는 설비가 간단하고 매우 균일하게 열팽창을 시킬 수 있을 뿐만 아니라 대량생산에서도 유리할 것으로 기대하였다. 천연 그라파이트(99.9%, 평균입도 $200{\mu}m$)를 Hummer 방법에 따라 $H_2SO_4$와 $KMnO_4$를 사용하여 산화시키고 필터링 후 마이크로웨이브를 조사하였다. 이후 환원 처리를 거쳐 그라핀을 제조하였다. 라만스펙트럼 및 투과전자현미경으로 분석한 결과 우수한 품질의 그라핀이 형성되었음을 알 수 있었다. 그라핀의 두께 및 품질은 마이크로웨이브의 인가시간 및 반복 횟수가 증가함에 따라 크게 영향받는 것을 확인하였다. 본 발표에서는 마이크로웨이브를 사용한 산화 그라파이트 박리 및 그라핀 제조라는 새로운 시도와 주요변수에 따른 그라핀 특성에 관한 결과를 논의할 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.610-616
• /
• 2020

Recently, the application of a photocatalyst to road structures is being attempted to solve environmental problems caused by fine particulate matter and automobile exhaust. The purpose of this study was to develop a release agent with GST (low-cost, high-performance photocatalyst produced from wastewater sludge). For this, the method of mixing and dispersing GST with the release agent was used first, and the removal performance of nitrogen oxide (NOx) was then checked. The best performance without a precipitation reaction was achieved using a stabilizing agent at 20 % in an outdoor exposure test for four weeks. The NO and NOx removal rate of the specimen demolded by applying the GST release agent developed in this study showed excellent effects of 200 to 400 % compared to the Plain material. To increase the performance of the GST release agent, it is necessary to improve the dispersibility of GST in the release agent and increase the amount of the nano-sized photocatalyst. In addition, the use of GST release agent in road structures and exposed concrete is expected to increase the NOx removal efficiency.

• Journal of Chest Surgery
• /
• v.40 no.7 s.276
• /
• pp.508-511
• /
• 2007

The causes of aortic dissection are usually hypertension, connective tissue disease such as Marfan syndrome, congenital valvular abnormality such as bicuspid aortic valve, iatrogenic injury, pregnancy and drugs. Previous studies have shown that 50% of all dissections in women less than 40 years age were associated with pregnancy. Almost all aortic dissections during pregnancy occur during the third trimester or during labor and delivery. Marfan's syndrome is a particularly important predisposing factor for aortic dissection during pregnancy. We report here on a case of surgical treatment for acute type II aortic dissection in a Marfan syndrome patient who was 24 weeks pregnant, and we include a review of literature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.124-124
• /
• 2000

다이아몬드에 버금가는 높은 경도뿐만 아니라 높은 화학적 안정성 및 열전도성 등 우수한 물리화학적 특성을 가진 입방정 질화붕소(cubic boron nitride)는 마찰.마모, 전자, 광학 등의 여러 분야에서의 산업적 응용이 크게 기대되는 재료이다. 특히 탄화물형성원소에 대해 안정하여 철계금속의 가공을 위한 공구재료로의 응용 또한 크게 기대된다. 이 때문에 각종의 PVD, CVD 공정을 이용하여 c-BN 박막의 합성에 대한 연구가 광범위하게 진행되어 많은 성공사례들이 보고되고 있다. 그러나 c-BN 박막의 유용성에도 불구하고 아직 실제적인 응용이 이루어지지 못한 것은 c-BN 박막의 증착직후 급격한 박리현상 때문이다. 본 연구에서는 평행자기장을 부가한 ME-ARE(Magnetically Enhanced Activated Reactive Evaporation)법을 이용한 c-BN 박막의 합성에서 적용한 증착공정 인자들의 변화에 따른 박리특성 고찰과 함께 다층박막화 및 제 3원소 혼입 방법을 적용하여 박리특성 향상 정도를 조사하였다. BN 박막합성은 전자총에 의해 증발된 보론과 (질소+아르곤) 플라즈마의 활성화반응증착(Activated Reactive Evaporation)에 의해 이루어졌다. 기존의 ARE 장치와 달리 열음극(got cathode)과 양극(anode) 사이에 평행자기장을 부가하여 플라즈마의 증대시켜 반응효율을 높였다. 합성실험용 모재로는 p-type으로 도핑된 (100) Si웨이퍼를 30$\times$40mmzmrl로 절단 후, 10%로 희석된 완충불산용액에 10분간 침적하여 표면의 산화층을 제거한 후 사용하였다. 박막실험실에서의 주요공정변수는 기판바이어스 전압, discharge 전류, Ar/N2가스유량비이었다. 합성된 박막의 결정성 분석을 FTIR을 이용하였으며, BN 박막의상 및 미세구조관찰을 위해 투과전자현미경(TEM;Philips EM400T) 분석을 병행하였고, 박막의 기계적 물성 평가를 위해 미소경도를 측정하였다. 박리특성의 고찰은 대기중에서의 자발적 박리가 일어나 90%이상의 박리가 진행된 시점까지의 시간을 측정하였고, 증착직후 박막의 잔류응력 변화와 연관하여 고찰해 보았다.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.447-456
• /
• 2014

This study is mainly about materials that are used in Sungnyemun gate's dancheong to find causes of dancheong's damage such as desquamation and peeling off. 12 kinds of pigments' components which are used in dancheoong are analyzed. Except for Hobun and Seokganju, the pigments are artificial. Samples are made with different conditions of adhesives and the rate of binder. To estimate promotion weathering test, adhesives are applied in a different order. Desquamation and peeling off presented especially when different adhesives are used on dancheong and also, generally the layer thickened.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.174.1-174.1
• /
• 2016

무전해 도금법은 외부 전원을 인가하지 않고 환원제를 이용하여 자발적으로 금속 도금층을 형성시키는 기술로, 용액내의 환원제가 산화될 때 방출되는 전자가 금속 이온에 전이하여 금속을 코팅하는 기술이다. 그 중에서도 Cu 무전해도금은 박막 형성의 용이성 및 간단한 제조 공정으로 인한 제조 원가 절감 등의 장점으로 인해 반도체 소자 배선부분에서 건식방식으로 발생되는 한계점들에 대한 해결 기술로 주목받고 있다. 또한, 이 기술은 금속 이온이 환원제에 의해 금속으로 석출되기 때문에, 피도금물이 무전해 도금액과 균일하게 접촉하고 있으면 균일한 도금 두께를 얻을 수 있는 장점이 있어서 복잡하고 다양한 형상의 제품에 적용이 가능하다. 본 연구에서는 플라스틱, PCB 등 다양한 기판에 도금 환원제, 온도 및 시간 등 도금변수를 변경하여 Cu 도금막을 형성한 후 그 특성을 평가하였다. 도금층 두께 분석을 위해 field emission scanning electron microscope (FE-SEM), energy-dispersive spectroscopy (EDS)를 사용하였으며, 박리성 평가를 위해 cross-cutting test를 실시하였다. 실험 결과, 두께 $1{\sim}3{\mu}m$ 급의 균일한 도금층이 형성된 것을 확인하였으며, $85^{\circ}C/85%$ 고온고습 조건에서 168시간 후 박리성 평가 결과, 결함 없는 양호한 표면을 나타내었다.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.107-113
• /
• 2010

In this study, the relative effects of low-chloride deicier(LCD) and two other deicing agents on the scaling of concrete were conducted in a series of tests at laboratory accordance with the ASTM C 672. The solutions concentration of deicers tested included 1, 4, 10%. Tap water was used as control. The amount of scaling was evaluated gravimetrically. As test result of deicer solution types, when applied to 4% solutions, surface scaling of concrete after 56 freeze-thaw cycles was produced significantly as about 9 times on LCD solution, as about 18 times on $CaCl_2$ solution, and as about 33 times on NaCl solution comparing with tap water. As test result of deicer solution concentrations, relatively low concentrations (of the 4% by weight) of deicer were produced more surface scaling than higher concentrations (of the 10% by weight) or lower concentrations (of the 1% by weight) of deicer. It show that the damaging concentration is of the order of 3~4% for previous research result. It appears that the mechanism of surface scaling is primarily physical rather than chemical. Also, the effect of chloride deicier types, freeze-thaw cycling, and air contents on the performance of concrete was experimentally investigated. The results show that the concrete specimens subjected to freeze-thaw cycling scaled more severely in exposure to deicing salt than those in non-exposure to deicing salt, weight losses of the specimens tested in exposure to deicing salt were twice as much as those tested in non-exposure to deicing salt. Relative dynamic modulus of elasticity of concrete specimens decreased more quickly in exposure to deicing salt than in non-exposure to deicing salt. Also, relative dynamic modulus of elasticity of concrete specimens in exposure to sodium chloride deicing salt was decreased more quickly comparing with exposure to LCD salt. It is also shown that the chloride contents according to concrete specimen depths was more largely in exposure to LCD salt. When concrete specimen is exposed to chloride deicing salts and freeze-thaw cycling, performance degradation in the entrained air concrete(AE concrete) retarded more considerably comparing with non-entrained air concrete(Non-AE concrete).