• Title/Summary/Keyword: 박리점

Search Result 112, Processing Time 0.023 seconds

A Note on the Asymptotic Structure of the $90^{\circ}$-Corner Flow ($90^{\circ}$-모서리 유동의 점근적 구조에 관한 소효)

  • Suh, Yong-Kweon
    • Journal of Ocean Engineering and Technology
    • /
    • v.2 no.2
    • /
    • pp.46-50
    • /
    • 1988
  • $90^{\circ}$-모서리 주위의 유동에 관한 수치해석결과를 바탕으로 그 유동구조를 점근적으로 해석하였다. 전체유동구조는 고전적 자유유선 이론에 의한 모델과 일치하였으며 경계층 박리점 주위의 유동구조는 최근의 트리플뎨 이론에 근거하였으며 그 결과가 수치해석의 결과와 아주 잘 맞는데 따른 결과이다.

  • PDF

The effect of incident angle on flow around a square cylinder (박리점 변동에 따른 사각 실린더 주위 유동 해석)

  • Won, Seong-Jin;Lee, Chang-Hun;Choe, Jeong-Il
    • Proceeding of EDISON Challenge
    • /
    • 2013.04a
    • /
    • pp.431-436
    • /
    • 2013
  • 본 연구에서는 정사각형으로 모델링 된 실린더 주위에 균일한 유동이 흐를 때, 나타나는 이차원 층류 유동을 분석하였다. EDISON_CFD를 이용하여 각도의 변화에 따른 사각 실린더의 박리점에 의한 주위 유동 현상을 해석하였다. 격자 분해능과 시간 간격에 따른 정확성을 분석하였다. 각도의 변화에 따른 정사각 실린더의 양력계수와 항력계수를 확인하였다. 또한 한 주기의 자료값을 평균한 유동에서 박리점의 위치 변화와 주 와흘림의 길이를 분석하였다.

  • PDF

Disbonding in aspect of the behavior of hydrogen embrittlement (스테인레스강 육성용접경계부의 수소취화 거동과 박리균열)

  • 이영호
    • Journal of Welding and Joining
    • /
    • v.8 no.1
    • /
    • pp.2-11
    • /
    • 1990
  • 오-스테나이트계 스테인레스강을 용접육성한 강판의 박리균열의 원인에 대하여 강중의 수소거동을 중심으로 고찰해 보았다. 강중의 수소온도 분포를 추정하는데는 확산 방정식을 기초로하여 수치해석이 유력하며 그 기초적사항에 대해 제문헌을 인용하여 설명했으며, 또 시험편에 대하여 계산과 실험치의 결과를 이용하여 비교하였다. 이들로부터 박리균열의 발생에 대한 미시적 임계조건을 도출하여, 이들이 한정된 실험의 범위내이지만 실증할 수 있음을 나타내었다. 그러나 박리균열의 원인의 하나인 잔류응력에 대해서는 아직 불명한 점이 많으나, 냉각속도에 따라 변화하며 그것이 수소농도라고 하는 관점에서 미시적 임계조건에 영향을 미칠 수 있음을 시사하고 있다.

  • PDF

Surgical Therapy of Stanford Type A Acute Aortic Dissection -Dose intimal tear within replaced aortic segment make any difference in its clinical characteristics- (Stanford A형 급성 대동맥박리증의 외과적 치료 -내막 파열점 위치에 따른 임상경과의 차이-)

  • 조광조;우종수;성시찬
    • Journal of Chest Surgery
    • /
    • v.34 no.2
    • /
    • pp.125-132
    • /
    • 2001
  • 배경 및 목적: Stand A형 급성대동맥박리증의 박리 시발점이 수술치환부위 내에 있는 경우와 그렇지 않은 경우의 임상적 차이점을 분석하여 치료에 도움을 주고자 하였다. 방법: 1991년 3월부터 1999년 7월까지 본원에서 급성상행대동맥박리증으로 진단되어 상행대동맥치환술을 받은 40명의 환자를 대상으로 병력기록을 근거로 수술 소견 상 찢어진 부위를 발견한 환자 27명을 1군, 발견 못한 나머지 13명을 2군으로 나누고 환자의 술 전 상태와 수술소견 및 술후 경과의 임상적 차이점을 분석하였다. 결과: 1군에서 술전에 저혈압, 대동맥판막부전, 심허혈, 신부전 등이 더 많이 발생되었다. 수술 소견 상 대동맥근부 이상은 1군에서 많았다. 가성 내강 내 혈종은 2군에서 더 많이 관찰되었지만 통계적으로 유의하지는 않았다. 술후에 2군에서는 신부전이 더 많이 발생하였고 술후 출혈로 인한 재수술은 1군에서 더 많았다. 조기 수술사망은 1군에 6명으로 사망률은 22.2%이었고 2군에는 사망 례는 없었다. 결론: 본 연구를 통하여 상행대동맥에서 내막 파열이 발견된 1군에서는 2군에 비해 술전 상태가 불량하였고 대동맥판막 병변으로 수술이 복잡해져 사망률이 높다고 생각된다. 반면 원위부 하행대동맥에서 박리가 진행되어 상행대동맥으로 이어진 2군에서는 1군에 비해 순환 장애로 인해 술후에 신부전이 더 많이 발생되었다. 결론적으로 상행대동맥내막에 파열점이 없었던 군에서 수술 예후는 상행대동맥내막에 파열점이 있는 군보다 더 좋았다.

  • PDF

Prediction of Separation Load and Failure Mechanism of Reinforced Concrete Beams strengthened with Steel Plates (강판 휨보강된 철근콘크리트보의 파괴기구 및 박리하중산정 이론연구)

  • 오병환;강동옥;조재열
    • Magazine of the Korea Concrete Institute
    • /
    • v.9 no.6
    • /
    • pp.243-254
    • /
    • 1997
  • 최근들어 구조물의 노후화와 차량하중 등의 증가로 구조물의 손상이 커지고 있으며 보강의 필요성이 절실히 대두되고 있다. 강판보강공법은 강성의 확실한 증가와 내구성 등으로 인하여 그 동안 폭넓게 사용되어 오고 있으나 효율적 보강을 위한 공법과 이론이 아직까지도 정립되지 않은 상태이다. 따라서 본 연구의 목적은 그 동안의 실험결과를 중심으로 보강도니 철근콘크리트보의 파괴기구와 박리거동을 분석하고 이로부터 합리적인 박리하중 산정이론을 제한하는데 그 목적을 두고 있다. 보강된 강판의 길이와 두께 등의 영향을 고찰하고,기존의 이론을 분석하여 기존이론의 불합리한 점을 밝혔으며, 이들을 보완한 수정이론을 제시하엿다. Roberts의 이론은 강판의 두께가 증가함에 따라 오히려 박리하중이 약간 증가하고 있어 실제적인 실험거동과 차이가 나고 있다. 본 연구의 제안식은 실제 거동을 합리적으로 표현하고 있으며, 앞으로 보강설계에 유용한 자료가 될 것으로 기대되고 있다.

A Study on the Influence Factors on Flexural and Thickness Modes in the Impact-echo Test (충격반향기법에서의 휨 모드 및 두께 모드의 영향인자에 대한 연구)

  • Oh, Tae-Keun;Park, Jongl-Il;Byun, Yoseph;Lee, Young-Hak
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.28 no.6
    • /
    • pp.659-666
    • /
    • 2015
  • In this paper, various influence factors on the impact-echo test which is an effective method in characterizing defects such as such as the delamination in the concrete structures were studied. The side to thickness ratio(a/h), the relative position of impacting and sensing points over the delamination that have great effects on the flexural and impact-echo(thickness) modes were investigated and examined by the parametric finite element analysis. As a result, the flexural modes dominate in the case of a/h > 2 and the thickness mode was more evident when a/h < 2. With regard to the relative position of impact source and sensing point to the defect, the flexural modes dominate even when either the loading or sensing point was over the delamination defect. However, the thickness mode prevails when both the impacting and sensing points are over the solid region beyond the delamination area.

A Study on the Fouling Effect of Geothermal Water Scale in In-line tube Bank (직렬 관군에서 지열수스케일의 파울링 영향에 관한연구)

  • 윤석범
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.23 no.2
    • /
    • pp.131-139
    • /
    • 1999
  • An experimental study was conducted to investigate the fouling effects of geothermal water scale deposited onto a heating surface upon its forced convection heat transfer characteristics. Scales deposited onto the heating surfaces of heat exchangers seriously reduce the heat transfer perfor-mance and also increase the hydrodynamic drag. Accordingly fouling is an important problem in the design and operation of heat exchangers. The cylinders were settled in tandem with equal dis-tance between neighbouring cylinders and only the test cylinder was heated under the condition of constant heat flux. The Reynolds number was varied from 13000310 through 50003100. It is found that the heat transfer of the in-line tube banks greatly varies with the fouling of geothermal water scale especially its scale height. Further the local and average Nusselt numbers strongly depend upon the cylinder spacing and the Reynolds number.

  • PDF