• Journal of ILASS-Korea
• /
• v.15 no.3
• /
• pp.150-156
• /
• 2010

Ethanol has properties of a lower setting point, higher oxygen contents, lower cetane numbers, and also higher volatility compared to biodiesel. Thus, biodiesel fuel can be improved in the fluidity of blending fuel and exhaust emissions by blended ethanol fuel. This research aims to understand combustion characteristics of biodiesel-ethanol blending fuel inside a constant volume chamber. High speed camera was applied to visualize the physics of development of combustion processes, and combustion pressure and exhaust emissions were measured at several blending ratios of ethanol and biodiesel fuel. This information may contribute to improve the performance of biodiesel engine and reduce emissions in future.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.6
• /
• pp.697-703
• /
• 2017

This study investigated the high-efficient process for bioethanol from barley by various condition. First, higher concentrations of ethanol could be produced without loss of yield by using reducing water consumption. This is because it could prevent to increase viscosity despite reducing water consumption. Second, the ethanol yield could be improved by using reducing particle size of biomass (increase of enzyme reactive surface). Third, The addition of protease could have a considerable effect on yield of fermentation, which provides nutrients to the yeast. This results showed that bioethanol production would provide efficient ethanol production and lower production costs.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.131-137
• /
• 2012

This article is about using the fuel mixed with 10% and 20% bio-ethanol to gasoline for the engine as a way to reduce carbon emission before commercializing future automobiles like fuel cell cars. The fuel mixed with 10% and 20% bio-ethanol showed output equivalent to that of the previous gasoline fuel. CO and $CO_2$ emission was somewhat reduced, but the difference was not significant. And the consumption of the fuel increased slightly. However, bio-ethanol is produced from bio mass growing with the absorption of carbon dioxide, so the total amount of carbon dioxide did not increase according to the result. In NOx, as the use of ethanol increases, the effect of reduction gets greater, and the emission of oxygen showed almost no change compared with gasoline.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.1-7
• /
• 2009

Ethanol has properties of a lower setting point, higher oxygen contents, lower cetane numbers, and also higher volatility compared to biodiesel. Thus, biodiesel fuel can be improved in the fluidity of and exhaust emissions by blended ethanol fuel. This research aims to understand combustion characteristics of biodiesel-ethanol blending fuel inside a constant volume chamber by obtaining some fundamental data in order to improve combustion atmosphere. To understand the physics of combustion, high speed camera was applied to visualize the development of combustion processes, and combustion pressure and exhaust emission were measured at several blending ratios of ethanol and biodiesel fuel. This information may contribute to improve the performance of biodiesel engine and reduce emissions in future.

• KSBB Journal
• /
• v.24 no.5
• /
• pp.439-445
• /
• 2009

The process for ethanol production requires lignocellulosic biomass to be hydrolyzed to generate monomeric sugars for the fermentation. During hydrolysis step, a monomeric sugars and a broad range of inhibitory compounds (furan derivatives, weak acids, phenolics) are formed and released. In this study, we investigated the effects of inhibitory compounds on the fermentative performance of Saccharomyces cerevisiae K35 and Pichia stipitis KCCM 12009 in ethanol production, two yeast strains were fermented in the synthetic medium including six inhibitory compounds such as 5-hydroxymethylfurfura (5-HMF), furfural, acetic acid, syringaldehyde, vanillic acid and syringic acid. Ethanol of over 40 g/L was produced by two yeast strains in the absence of inhibitory compounds, respectively. Most inhibitory compounds except acetic acid had a little effect on the ethanol production, but acetic acid showed high inhibition effect on the cell growth and ethanol production.

• Journal of Life Science
• /
• v.23 no.10
• /
• pp.1192-1198
• /
• 2013

To improve yeast strains for bioethanol production, yeasts with ethanol tolerance, thermotolerance, and ${\beta}$-1,3-glucanase activity were bred using yeast genome shuffling. Saccharomyces cerevisiae $BY4742{\Delta}exg1$/pAInu-exgA, which has extracellular ${\beta}$-1,3-glucanase activity, and the Aspergillus oryzae and S. cerevisiae YKY020 strains, which exhibit ethanol tolerance and thermotolerance, were fused by yeast protoplast fusion. Following cell fusion, four candidate cells (No. 3, 9, 11, and 12 strains) showing thermotolerance at $40^{\circ}C$ were selected, and their ethanol tolerance (7% ethanol concentration) and ${\beta}$-1,3-glucanase activity were subsequently analyzed. All the phenotypes of the two parent cells were simultaneously expressed in one (No. 11) of the four candidate cells, and this strain was called BYK-F11. The BYK-F11 fused cell showed enhanced cell growth, ethanol tolerance, ${\beta}$-1,3-glucanase activity, and ethanol productivity compared with the $BY4742{\Delta}exg1$/pAInu-exgA and YKY020 strains. The results prove that a new yeast strain with different characters and the same mating type can be easily bred by protoplast fusion of yeasts.

• Bulletin of Food Technology
• /
• v.22 no.3
• /
• pp.413-429
• /
• 2009

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.3102-3107
• /
• 2008

This paper was focused on the particulate matter (PM) on the gasoline and bio ethanol. Bio ethanol as a clean fuel is considered one of the alternative fuels that decreased the PM emission from the vehicle. Particle formation in SI engine was depended on the fuel and engine operating condition. In this paper, Particle number concentration behaviors were analyzed by DMS500 (Differential Mobility Spectrometer) and CPC (Condensation Particle Counter) instrument which was recommended by PMP (Particle Measurement Programme). Particle emissions were measured with various engine operating variables such as air excess ratio ($\lambda$), spark timing and intake valve opening (IVO) at part load condition. In vehicle test, the number of particulate matter was analyzed with golden particle measurement system, which was consist of CVS (Constant Volume Sampler), particle number counter and particle number diluter.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.177.2-177.2
• /
• 2011

세계적인 자원고갈과 지구온난화와 같은 환경문제가 발생됨에 따라 대체에너지 개발에 대한 연구가 활발히 이루어지고 있다. 섬유소 기질을 이용한 바이오에탄올 생산은 세계적으로 막대한 자원이 있으며 광합성에 의해 재생산되는 무한한 재원으로서 환경적으로도 대기오염물질을 적게 배출하여 유용한 에너지원으로 각광받고 있다. 하지만 섬유소 기질은 cellulose, hemicellulose, lignin과 같은 고분자 화합물이 유기적으로 결합된 단단한 결정구조로 이루어져 있어 이를 분해하여 원하는 물질을 얻기 위해서는 전처리 과정이 필요하다. 전처리 공정은 바이오에탄올을 생산하는 당화 및 발효공정의 효율 및 반응시간 단축에 기여하며, 특히 섬유소 기질일 경우에는 필수불가결한 공정이다. 전처리 공정은 물리적, 화학적, 생물학적 방법으로 나누어지며, 이러한 방법들 중 기질의 특성과 처리효율에 따라 기술들을 병합하여 사용하기도 한다. 이에 본 연구에서는 산 처리, 암모니아 처리, 과산화수소 처리 및 효소를 이용한 생물학적 처리를 단독 또는 병행하여, 전환된 당 성분 및 함량을 조사함으로서 섬유소계 기질인 채소 음식물류 쓰레기를 대상으로 바이오에탄올을 경제적으로 생산하기 위한 적합한 전처리법을 검토하였다. 전처리 방법별 당화율을 살펴보면, 산 처리와 암모니아-과산화수소-계면활성제 처리가 각각 65.3 % 및 65.7 %로 가장 높았으며, 과산화수소 처리는 16.2 %로 가장 낮았다. 반면 전처리 공정 없이 효소를 이용한 당화만을 실시한 경우에는 4.3 %의 낮은 당화율을 나타내었다. 섬유소계 기질의 전처리 효율을 향상시키기 위해 첨가하는 계면활성제의 효과는 암모니아-과산화수소 및 암모니아-과산화수소-계면활성제 처리의 당화율을 비교한 결과, 뚜렷한 효과를 확인할 수 없었다. 전처리 방법별 당의 성분 및 함량을 비교한 결과 육탄당은 암모니아-과산화수소-계면활성제 전처리에서 가장 많이 검출되었다. 오탄당은 산 처리 후 그 함량이 현저히 높았으며, 오탄당 중 xylose의 함량이 60.49 mg/g로 가장 많이 차지하고 있었다. 이 결과로부터 전처리 방법에 관계없이 당화율은 유사한 수준을 보이지만, 당화된 당의 성분 및 함량에는 큰 차이가 있음을 알 수 있었다. 이당류의 경우 과산화수소 및 암모니아-과산화수소 처리를 제외한 나머지 전처리 방법에서 유사한 수준을 나타내었다. 암모니아 처리 및 과산화수소 처리를 순차적으로 병행한 암모니아-과산화수소 처리에서는 각각의 처리시보다 육탄당의 함량은 증가하였으나 암모니아 처리시보다 이당류의 함량은 감소한 것으로 나타났다.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.994-1001
• /
• 2008

Freundlich isothermal adsorption parameters, applicable to such biofilter-model as process-lumping model(Lim's model), for sterilized granular activated carbon(GAC), sterilized compost and sterilized equal volume mixture of GAC and compost were obtained and were compared each other, assuming that adsorbents are enclosed by water layer, in order to construct robust process-lumping biofilter model effective for wide-range of hydrophilic volatile organic compounds(VOC). In this investigation 0.04, 0.08, 0.12, 0.16, 0.2, 0.4, 0.8 and 1.0ml of ethanol were added to three kinds of adsorbent-media and were placed at $30^{\circ}{\cdots}$ under the wet condition of the media, which was the same as biofilter operating condition, until the adsorption reached the condition of equilibrium before each adsorbed amount of ethanol was obtained. Then adsorption capacity parameters(K) and adsorption exponents of Freundlich adsorption isotherm equation, which simulates the adsorbed amount of ethanol equilibrated with the ethanol concentration of the condensed water in the pore of the media, were constructed for sterilized granular activated carbon(GAC), sterilized compost and sterilized equal volume mixture of GAC and compost as (0.7566 and $5.070{\times}10^{-7}mg-ethanol/mgmedia/(mg-ethanol/m^3)^{0.7566}$), (0.8827 and $1.000{\times}10^{-8}mg-ethanol/mgmedia/(mg-ethanol/m^3)^{0.8827}$) and (0.5688 and $5.243{\times}10^{-6}mg-ethanol/mgmedia/(mg-ethanol/m^3)^{0.5688}$), respectively. These Freundlich isothermal adsorption parameters were applicable to the adsorption characteristics of biofilter media enclosed with bio-layer. The order of magnitude of the ratio of ethanol-air/water partition coefficient and toluene-air/water partition coefficient was almost consistent to that of ethanol-adsorbed amounts in this experiment with compost and in the investigation of Delhomenie et al. on toluene-adsorption to wet compost.