• KSBB Journal
• /
• 제23권1호
• /
• pp.54-58
• /
• 2008

수소는 연료전지와 같은 친환경적인 용도로 인해 미래의 에너지로서 주목받고 있는데, 생물학적인 발효법은 수소의 생산을 위한 유망한 방법이다. 본 연구에서는 Enterobacter aerogenes KCCM 40146을 대상으로 수소 생산을 최대로 하기 위한 배지의 조건을 최적화하였다. 그 결과, 0.5M potassium phosphate buffer pH 6.5에서 glucose 30 g/L일 때 수소의 누적 농도가 431 $m{\ell}$로 최대값을 얻을 수 있었다. 질소원으로 peptone과 tryptone을 넣은 배지가 수소의 생산 뿐 아니라 균주의 성장에 가장 효율적이었다 한편, 미생물의 성장속도조절이 수소의 효율적 생산을 위해 중요한 실험변수임을 알 수 있었다.

• 한국연소학회지
• /
• 제15권2호
• /
• pp.34-40
• /
• 2010

The effect of co-firing with pulverized coal and wood biomass on ignition and burn-out temperature was investigated at air and oxy-fuel conditions by thermo gravimetric analyzer(TGA). Three kinds of coal(shenhua, adaro, wira) were selected and mixing ratios of coal and wood biomass was set to 1, 0.5, and 0.8. The ignition temperature depended on the amount of volatile matter of blended fuel, while the burn-out temperature was dominated by the oxidant ingredients. The oxy-fuel condition with an oxygen ratio(Ofr,o) of 0.3 showed similar tendency with air condition in the heat flow measurement. Volatile matter reaction, however, became dominant when oxygen ratio exceeded 0.8 for co-firing combustion of wood biomass and pulverized coal.

• 한국연소학회지
• /
• 제20권1호
• /
• pp.15-23
• /
• 2015

This paper presents the results of field demonstration for fuel switching to bio-fuel oil in 4 commercial heavy oil fired power plants. The 100% fuel switching field demonstration was successfully carried out in two tangential-firing boilers at a capacity of 75 and 100 MWe respectively without major equipment retrofit, and also 25% bio-fuel oil blending for two opposite firing boilers at a capacity of 350 and 400 MWe respectively. Despite the low density and heating value, the bio fuel was successfully replaced heavy fuel oil at the full load by only adjusting operational parameters. Incase of bio fuel oil combustion, heat absorption of radiative heat transfer section was reduced while convection section has opposite trend. In pollutants emission, a major reductionin SOx as well as 10-20% reduction in NOx were achieved by the fuels witching. On the other hand, boiler efficiency was slightly underestimated.

• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.19-25
• /
• 2012

This study describes effects of DME additives on combustion and exhaust emissions characteristics including nano-particle in a single cylinder compression ignition engine. Considered additives include bio-diesel, n-butanol, and MTBE for increasing kinematic viscosity. Among three additives, n-butanol showed the greatest kinematic viscosity. In addition MTBE showed the highest vapor pressure. In the present study mixing ratios of additives were kept constant at 1 and 10% by volume. Experiments were performed at 1200rpm engine speed and nano-particles were measured by SMPS (Scanning mobility particle sizer) devices. Results of combustion characteristics showed that considered additives had little effects on combustion pressure. However, patterns of heat release rate were dependent on properties of additives. Nano-particles of MTBE were the lowest among considered additives.

• 한국농공학회논문집
• /
• 제59권5호
• /
• pp.17-23
• /
• 2017

In South Korea, 25 % of annual agricultural residues (11.64 million tons) are unused. The hydrophilicity, low lower heating value (LHV), and low energy density of agricultural residues can be obstacles for efficient usage. Torrefaction, a low temperature pyrolysis process, can be a solution to overcome these disadvantage of agricultural residues. In this study, agricultural residues such as bean stem, pepper stem, perilla stem, sorghum stem, acorn shell, and ginkgo shell are torrefied at 200, 230, and $250^{\circ}C$ and evaluated energy properties, respectively. The torrefaction can increase the LHV and energy density rate of agricultural residues from 3,331~4,444 kcal/kg to 4,166~5,830 kcal/kg and 20~30 %, respectively.

• 한국분무공학회지
• /
• 제15권4호
• /
• pp.195-201
• /
• 2010

Due to its carbon-neutral nature, biogas generated from anaerobic digestion or fermentation of biodegradable wastes is one of the important renewable energy sources to reduce global warming. It is mainly composed of methane and various inert gases such as $CO_2$ and $N_2$, and the actual composition of biogas significantly varies depending on the origin of anaerobic digestion process. Therefore, in order to effectively utilize this fuel as an energy source for electricity, it is important to develop power generation engines which can successfully apply biogas with significant composition variations. In this study, efforts have been made to develop a diesel-biogas duel fuel engine as a way to achieve such a stable power generation. The effects of diesel fuel injection quantity and pressure on stable combustion and engine performance were investigated, and an impact of diesel fuel atomization was discussed. The engine test results show that there exists a 2 stage combustion which consists of diesel pilot fuel burning and premixed biogas/air mixture burning in dual fuel engine operation and optimum diesel injection parameters were suggested for biogases with various compositions and heating values.

• 한국농공학회논문집
• /
• 제57권1호
• /
• pp.79-87
• /
• 2015

A thermochemical equilibrium model was constructed for predicting composition of synthesis gas in biomass gasification. The model included estimation of equilibrium constants using Gibbs free energy. After constructing the model, the results were compared with the experimental values and predictions from a previous model. Gas compositions were reasonably well agreed with them and showed effects of operational and fuel condition. When the reaction temperature increased, the lower heating values decreased due to the decrease in CH4 concentrations. The methane concentrations were lower than those observed in experimental results. The model was used to predict the gas composition and heating values for the cases of mixed fuel of charcoal and un-dry woodchips. Although downdraft gasifiers require fuels less than 15% of moisture contents, the model results indicated that the mixed fuel with charcoal and woodchips which had over 25% of moisture contents could be used in the downdraft gasifiers. It might be explained by increase in energy density resulting from mixing charcoal. The results imply that the efforts and costs for drying biomass fuels could be reduced by mixing charcoal or fuels with higher calorific values.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.804-806
• /
• 2010

석유자원 고갈에 따른 대체에너지 개발의 필요성과 더불어 온실가스인 CO2 저감 등 높은 환경개선 효과로 인하여 새로운 청정연료로 바이오매스로부터 제조되는 BTL(Biomass to Liquid) 공정에 대한 관심이 유럽을 중심으로 크게 증가하고 있다. 본 논문에서는 BTL 기술의 핵심인 촉매와 공정 개발 현황을 조사하였다. 또한 본 연구팀에서 수행해온 철계 촉매를 사용한 BTL pilot 공정을 소개하고자 한다.

• 한국수소및신에너지학회논문집
• /
• 제26권5호
• /
• pp.393-401
• /
• 2015

The characteristics of diesel and biodiesel are similar like as cetane number and auto-ignition temperature. High cetane number of diesel and BD could make possible to compression ignition. but BD showed different atomization from diesel due to component like density, viscosity and iodine value etc. Because of this, the biodiesel requires validation. This study using diesel and BD20 investigated effect to durability injector. Durability test were used common rail and bosch solenoid type 5-hole injector. Total test was 672hr but actual running time was 200hr. Spray experiments for spray characteristics were carried out using constant volume combustion chamber. Spray characteristics of diesel and BD showed different result up to durability test time. After 100hr, diesel showed spray shapes were stable but BD was not. After 200hr, difference of diesel and BD spray shapes were grow serious.

• 유기물자원화
• /
• 제19권1호
• /
• pp.57-63
• /
• 2011

화석연료가 고갈되어 감에 따라 사람들은 이를 대처할 수 있는 대체에너지를 찾기 시작했다. 이 대체 에너지는 환경 친화적이며 재생 가능해야 된다는 단서가 붙는데 그 중 가장 많은 주목을 받은 것이 수소이다. 현재 수소는 다양한 방법으로 생산되고 있는데 생물학적으로 수소를 생산하는 방법이 가장 환경 친화적인 방법으로 인식되고 있다. 그러나 아직 생물학적으로 수소를 생산하는 방법은 아직 상업화하기엔 경쟁력이 많이 부족하기 때문에 많은 연구자들이 바이오 수소 생산 방법과 그 생산성 및 생산수율을 높이기 위하여 노력하고 있다. 본 고에서는 생물학적 수소생산의 다양한 개발 접근방법들의 진행 추이를 정리하였다.