• 제목/요약/키워드: 바이오연료

검색결과 682건 처리시간 0.023초

휘발유/에탄올 혼합연료의 자연발화 및 연소배기가스 특성에 관한 수치적 연구 (Numerical Study on Auto-ignition and Combustion Emissions Using Gasoline/Ethanol Surrogates)

  • 이의주
    • 한국화재소방학회논문지
    • /
    • 제30권3호
    • /
    • pp.1-6
    • /
    • 2016
  • 자동차화재는 매년 5,000건 이상의 사고가 발생되며, 직접적인 피해 뿐 아니라 교통혼잡과 공해물질 배출 등 많은 2차적 손실을 가져온다. 최근에는 자동차 연료로서 휘발유에 에탄올을 섞는 것을 미국 등 여러 나라에서 상용화하고 있는데 이는 기존의 화석연료의 사용을 억제하고 바이오연료의 소비를 촉진시키기 위함이며, 향후 법제화를 통해 이러한 에탄올 함유량을 향후 더 크게 늘릴 예정이다. 본 연구에서는 에탄올을 혼합한 가솔린 연료를 사용하는 자동차의 엔진과 후처리 시스템 화재 위험성을 조사하기 위해 PSR로 모델링한 엔진에서 연소특성을 조사하였다. 에탄올 첨가 연료를 사용하는 경우에는 에탄올 분율이 증가하면 열적인 화재 가능성이 감소되었다. 또한, NOx와 CO 배출량이 감소하였지만, 미연탄화수소의 배출은 증가됨으로 예측되었다. 이러한 결과는 후처리 장치 중 기존의 삼원촉매의 경우에는 보다 저온이 예측되므로 열적인 화재발생이 감소한다고 예상되지만, 미연탄화수소의 증가로 후처리장치에 고온분위기가 형성되어야 하므로 화재의 위험성이 증가될 수 있다.

미생물연료전지를 이용한 유가공 폐수로부터 전기생산 (Electricity Generation from Dairy Wastewater Using Microbial Fuel Cell)

  • 노성희;이성욱;김경량;김선일
    • 공업화학
    • /
    • 제23권3호
    • /
    • pp.297-301
    • /
    • 2012
  • 미생물연료전지는 미생물의 신진대사 활동을 통해 자발적으로 바이오매스를 전기로 전환시키는 바이오 전기화학 시스템이다. 본 연구에서는 미생물 접종원으로 활성슬러지를 사용하였으며, 미생물연료전지의 전기생산을 위한 기질로서 유가공 폐수의 적용 가능성을 검토하였다. 전력발생 장치로서 미생물연료전지의 성능을 파악하고자 전지전위, 전력밀도, 순환전압전류 분석 및 지속가능 전력생산에 관한 특성을 유가공 폐수를 적용하여 평가하였다. Chemical Oxygen Demand (COD) 2650 mg/L의 유가공 폐수를 이용한 미생물연료전지 시스템에서 COD가 88% 제거되었으며, 최대 전력밀도는 $40\;mW/m^2$에 도달하였다. 본 연구 결과로부터 유가공 폐수를 효과적으로 처리하는 동시에 전기를 생산하기 위한 미생물연료전지 기술의 적용 가능성을 확인하였다.

바이오매스에 바인더 첨가에 따른 폐기물 고형연료 특성 및 환경성평가 (Environmental Assessment and Characteristic of Refuse Derived Fuel by Mixed Biomass with Binder)

  • 이형돈;조준형;김인득;김윤수;오광중
    • 청정기술
    • /
    • 제17권4호
    • /
    • pp.336-345
    • /
    • 2011
  • 우리나라는 산림총면적이 전 국토의 64.2%로 목재자원은 지속적으로 생산가능한 중요한 자원이지만 현재 재활용 가능한 폐목재가 분리, 수거되지 않고, 불법매립 및 소각 처리되고 있는 실정이다. 따라서 본 연구에서는 폐목재에 바이오매스자원인 왕겨와 저품위 무연탄을 혼합 압축하여 고형연료를 제조하였으며, 고형연료 제조 시 바인더와 첨가제의 바인딩효과를 분석하였다. 이때, 고형연료의 물리, 화학적 특성을 분석하였으며, 연료기준치와의 비교를 통해 적합성을 판단하였다. 실험결과 무연탄 20%, 왕겨 10%에서 최적의 밀도를 보였으며, P.V.A. (Polyvinyl alcohol), 구아검, 당밀 20 wt.%, 전분 10 wt.% 첨가 시 가장 우수한 것으로 나타났다. 대부분의 샘플이 연료 품질기준 4등급인 저위발열량 3,500 kcal/kg을 만족하는 것으로 나타났으며, 아스팔트 첨가 시 12.9%의 내구성 향상이 나타났고, NaOH 5% 쌀겨 첨가 시 최대 5.8%의 내구성이 향상되는 것으로 나타났다.

유동층 열분해로에서의 바이오매스 열화학적 전환 (Thermochemical conversion of biomass in a fluidized bed pyrolyzer)

  • 이시훈;김용구;홍재창;윤상준;최영찬;이재구
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.467-470
    • /
    • 2005
  • 지구온난화 현상과 화석연료의 고갈에 대한 두려움 때문에 재생에너지에 대한 관심이 지속적으로 증가하고 있다. 이에 따라 대체에너지, 합성가스, 화학 원료, 오일 등으로 전환할 수 있는 바이오매스 활용에 대한 연구도 활발히 진행되고 있다. 바이오매스의 열화학적 전환 공정에는 열분해, 연소, 가스화 등이 이용되고 있다. 특히 열분해는 syringol, levoglucosan, guaiacol등의 고부가가치 물질들을 생산하기에 적합한 기술로 인정받고 있다. 본 연구에서는 국내에서 쉽게 구할 수 있는 톱밥, 폐목재 등의 바이오매스의 열화학적 전환 특성을 분석하였다. 사용된 바이오매스의 열분해 특성은 열중량 분석기 및 열천칭 반응기를 통해 분석하였으며 이를 통해 유동충 반응기(지름 0.2m, 높이 2m)를 설계 및 제작하였다. 반응온도 및 산소 농도가 증가할수록 levoglucosan 등의 고부가가치 물질들의 수율이 낮아지며 페놀류가 급격히 증가함을 알 수 있었다. 회재 성분이 높은 왕겨의 바이오오일 수율은 톱밥보다 $30\%$이상 낮게 나타났다

  • PDF

바이오가스 활용과 품질기준 (Applications and technical standards for biogas)

  • 김승수
    • 유기물자원화
    • /
    • 제18권3호
    • /
    • pp.38-49
    • /
    • 2010
  • 유기성 폐기물의 혐기성발효공정에 의한 바이오가스 연구가 다양한 목적으로 활발하게 진행되고 있다. 혐기성공정 또는 매립지에서 생성되는 바이오가스의 주요 조성은 메탄, 이산화탄소와 미량의 황화수소와 암모니아로 구성되며, 생산지에서 불순물을 정화시킨 후 바로 사용하거나 혹은 파이프라인을 통해 천연가스처럼 사용할 수 있다. 생산된 바이오가스는 열과 스팀생산, 전기생산, 자동차용 연료 및 화학물질 생산 등에 사용되어질 수 있다. 바이오가스는 사용 용도에 따라 여러 나라들의 관련 규정들이 정비되고 있지만 아직까지 국제적으로 공인된 표준 규격은 없다. 본 논문에서는 세계 각국의 바이오가스 용도별 품질특성을 살펴보았다.

커먼레일 분사시스템에서 바이오에탄올 및 디젤연료 혼합 바이오디젤의 분무 특성 (Spray Characteristics of Biodiesel Fuel by Blending Bioethanol and Diesel Fuel in a Common Rail Injection System)

  • 박수한;서현규;김형준;이창식
    • 한국자동차공학회논문집
    • /
    • 제17권2호
    • /
    • pp.82-89
    • /
    • 2009
  • In order to investigate the spray characteristics according to diesel and bioethanol blending with biodiesel fuel, macroscopic spray characteristics were analyzed from the comparison of the effect of the injection pressure, ambient pressure and density on the spray tip penetration and spray cone angle. In addition, spray atomization characteristics were studied with local and overall Sauter mean diameter (SMD) and the contour map of SMD distribution at various injection conditions. It was revealed that the spray tip penetration of biodiesel fuels blended with diesel and ethanol was shorter than that of an undiluted biodiesel fuel at low injection pressure. However, the difference of spray tip penetration among three test fuels reduces at a high injection pressure. Increase of the ambient gas density leads to the decrease of the spray tip penetration of three test fuels. When diesel and ethanol fuels add to an undiluted biodiesel fuel, spray cone angle increases due to the decrease of the fuel density at the same ambient pressure condition. On the other hand, the droplet mean diameter decreases due to the reduction of the kinematic viscosity and surface tension.

CPF를 장착한 CRDI 디젤엔진에 바이오 혼합연료 사용에 따른 배출가스 특성 및 입자수분포 특성 (Characteristics of Exhaust Emissions and Particle Size Distribution using Biofuel Blended Diesel Fuel in CRDI Diesel Engine with CPF)

  • 김화남;성용하;김태준;최병철;임명택;서정주
    • 동력기계공학회지
    • /
    • 제12권1호
    • /
    • pp.5-12
    • /
    • 2008
  • We measured emission characteristics of CRDI diesel engine equipped with a commercial CPF. Experimental parameters adopted a neat diesel fuel, a blend of diesel fuel with 20% biodiesel, a blend of diesel fuel with 15% biodiesel and 5% ethanol. The experiments were carried out to measure the emission and engine performance according to ESC 13-mode cycles. The maximum torque with biodiesel blend fuel is slightly lower than that of neat diesel fuel in the entire the 13-mode cycles, and 5% ethanol and 15% biodiesel blend fuel is slightly higher than that of neat diesel fuel. THC and CO emissions of the biofuel blended diesel fuel were slightly increased and decreased, and mean conversion efficiencies of THC and CO on the commercial CPF were achieved about 70$\sim$87% in the ESC 13-mode. From the measurement by the Scanning Mobility Particle Sizer(SMPS), the total number and mass of nano-sized particles by a commercial CPF were decreased about 97.8% and 96.8 % in the range of the nano-size from 10.6 to 385nm, respectively.

  • PDF

수소생산기술현황 (Hydrogen Production Technology)

  • 주오심
    • Korean Chemical Engineering Research
    • /
    • 제49권6호
    • /
    • pp.688-696
    • /
    • 2011
  • 수소는 에너지를 방출하는 과정에서 부산물로 물만 배출하기 때문에 지속가능한 청정에너지원 중의 하나이다. 현재 세계적으로 사용되는 수소는 대부분 화석연료의 개질에 의해 생산되고 있으며 1kg 수소를 생산하는 과정에서 7kg 이상의 이산화탄소를 배출하고 있다. 수소를 생산하는 과정에서 투입되는 에너지와 자원이 지속가능하고 재생 가능해야 수소를 청정에너지원이라 할 수 있다. 바이오매스는 화석연료를 대체할 수 있는 에너지원중의 하나인데, 그 이유는 바이오매스로부터 수소를 생산할 수 있으며 수소생산과정에서 발생하는 이산화탄소는 바이오매스 생산과정에서 소비되기 때문에 이론적으로 이산화탄소를 발생시키지 않는 에너지원이다. 태양에너지와 물로부터 수소를 생산하는 기술은 지구상에 널려있는 자연에너지와 물을 사용하기 때문에 인류가 직면한 에너지와 환경문제를 해결하기 위한 가장 이상적인 기술 중의 하나이다.

연료전지 발전을 위한 바이오가스정제 (Biogas Purifying for Fuel cell Power Plant)

  • 이종규;전재호
    • 상하수도학회지
    • /
    • 제21권4호
    • /
    • pp.439-444
    • /
    • 2007
  • Using the anaerobic digester gas as a fuel, fuel cells have the potential to provide significant environmental and economic benefits. A molten carbonate fuel cell power plant was installed in the municipal sewage works of Tancheon in Seoul. The fuel cell unit operates on anaerobic digester gas and provides power and heat for the sewage works. This is the first project of its kind in Korea. This article outlines the experiences of gas purification process with planning, installation and operation. The engineering and installation phase is described regarding to the special features of digester gas, for example impurities in gas composition. Such impurities would be harmful to fuel cells. Operational results from the field test with a gas purification process plant are presented in this paper.

바이오디젤유를 사용하는 디젤기관에서 연료분사시기 변화에 따른 기관성능 및 배기배출물 특성 (Effect of Fuel Injection Timing on the Performance and Exhaust Emissions in IDI Diesel Engine Using Biodiesel Fuel)

  • 유경현;오영택
    • 한국자동차공학회논문집
    • /
    • 제12권2호
    • /
    • pp.76-82
    • /
    • 2004
  • Biodiesel fuel(BDF) which is easily produced from vegetable oils such as soybean oil and rice bran oil can be effectively used as an alternative fuel in diesel engine. However, BDF can affect the performance and emissions in diesel engine because it has different chemical and physical properties from diesel fuel. To investigate the effects of injection timing on the characteristics of performance and emissions with BDF in IDI diesel engine, BDF derived from rice bran oil was considered in this study. The engine was operated at six different injection timings and six loads at a single engine speed of 2000rpm. When the injection timing was retarded, better results were obtained, which may confirm the advantage of BDF. The reduction of NOx and smoke was observed for a 2$^{\circ}$ retarded injection timing without any sacrifice of BSEC.