• Journal of Industrial Convergence
• /
• v.20 no.7
• /
• pp.131-137
• /
• 2022

In the study, we endeavored to assess the convergence effect of Silybum marianum-derived silymarin and epidemiologically-correlated alcohol intake on vascular contractility and to determine the mechanism involved. There were few reports addressing the question whether thin or thick filament modulation is included in ethanol and silymarin-induced regulation. We hypothesized that ethanol at a low concentration and silymarin play a role in agonist-dependent regulation of vascular contractility. Denuded arterial muscles of Sprague-Dawley male rats were suspended in organ baths and isometric tensions were transduced and recorded using isometric transducers and an automatic data acquisition system. Interestingly, both silymarin and ethanol didn't encourage silymarin alone-induced inhibition in agonists-induced contraction suggesting that endothelial nitric oxide synthesis might be involved in ethanol or silymarin-induced modulation of vascular contractility and additional pathways besides endothelial nitric oxide synthesis such as ROCK inactivation might be involved in the silymarin-induced modulation of vascular contractility.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.631-636
• /
• 2022

Alcohol content, which is an important standard for Takju, a traditional multiple parallel fermentation liquor called makgeolli, is a factor that can affect the flavor. For alcohol content analysis, the distillation/hydrometry technique is mainly used. In this study, we analyzed the alcohol content of 14 commercially available Takju by the distillation/hydrometry technique and the improved GC method, respectively, after verifying the reliability of improved GC method. The precision and accuracy of the GC method were satisfactory, and LOQ and LOD were evaluated as 0.5% and 0.1% of ethanol contents, respectively. Among the three Takju exceeding the labelled alcohol content ±1, one Takju was quantitated as alcohol content 9.9% (by GC method) and 10.1% (distillation/hydrometry technique) exceeding labelled 6.0%. It was within the analytical error range of alcohol content for other two Takju, where the alcohol contents were exceeded -1.1%. The average precision (%RSD) of 14 Takju analyzed by the distillation/hydrometry technique (36.2%) and the GC method (12.8%), confirming that the GC method was better than the other. The improved GC method was evaluated to be effective in managing and improving the alcohol content standard of Takju with the wide range of alcohol content.

• Clean Technology
• /
• v.11 no.4
• /
• pp.171-179
• /
• 2005

Biodiesel is synthesized by transesterification of vegetable or animal oils with alcohols. Since it has similar characteristic with diesel fuel, it can be used as a fuel by mixing with diesel fuel. Moreover, it is advantageous that biodiesel can reduce air pollution emitted from fuel combustion and is produced from sustainable energy, biomass. Recently, many researchers have investigated biodiesel synthesis using supercritical methanol since it is economical due to shorter reaction time and simple separation/purification process, compared with conventional alkali- or acid-catalyzed process. By the development of biodiesel production process from waste edible oil using supercritical methanol, it can be expected to utilize potential energy resources, reduce carbon dioxide emission, and improve environmental conditions.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.687-693
• /
• 2018

The selective removal and recovery of fermentation inhibitors during purification of sugars from biomass hydrolysates can increase the economic efficiency of the entire process to produce bioalcohol from lignocellulosic biomass. This study investigated the effect of furans in phenols-free biomass hydrolysate on acetic acid extraction in an emulsion liquid membrane system. Under specific operating conditions, more than 99% of acetic acid could be extracted within 5 minutes, and the degrees of extraction of furfural and 5-hydroxymethylfurfural were about 10% and 4%, respectively. The extraction rate of acetic acid was also lower at a higher initial concentration of furfural in the feed phase, which was greater for furfural than 5-hydroxymethylfurfural. Thus, if furfural is first removed from the hydrolysate prior to acetic acid extraction, emulsion liquid membrane would be a more economically efficient way of removing acetic acid.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.20-26
• /
• 2022

Centrifugal spinning is an emerging technique for fabricating micro-to-nano-fibers in recent years. To obtain fibers with the desired size and morphology, it is necessary to configure and optimize the parameters used in centrifugal spinning. In this study, it was controlled by changing the solution's concentration (7.5, 10, and 12.5 wt.%) and disk's rotational velocity (6,000, 8,000, and 10,000 rpm) to prepare centrifugal spun nano-filter. The morphological property, air permeability, and dust collection efficiency of the PVA/PP bi-layer nanoweb prepared by centrifugal spun PVA on the PP micron nonwoven substrate are studied using a field emission scanning electron microscope, an air permeability tester, and a filter tester equipment, and the analysis results indicate that it is suitable as a nano-filter when the concentration of PVA solution is 10 wt.% and the rotational velocity of the disk is 8,000 rpm. The resultant reduced diameter and uniform fibers also proved that an excellent dust collection efficiency filter could be made.

• Microbiology and Biotechnology Letters
• /
• v.39 no.3
• /
• pp.238-244
• /
• 2011

Biodiesel, mono-alkyl esters of long chain fatty acids, is one of the alternative fuels derived from renewable lipid feedstock, such as vegetable oils or animal fats. For decade, various lipases have been used for the production of biodiesel. However, the production of biodiesel by enzymatic catalyst has profound restriction in industry application due to high cost. To overcome these problems, many research groups have studied extensively on the selection of cheap oil sources, the screening of suitable lipases, and development of lipase immobilization methods. In this study, we produced biodiesel from plant oil using Proteus vulgaris lipase K80 expressed in Escherichia coli cells. The recombinant lipase K80 was not only expressed in high level but also had high specific lipase activity and high stability in various organic solvents. Lipase K80 could produce biodiesel from olive oil by 3-stepwise methanol feeding method. The immobilized lipase K80 also produced biodiesel using the same 3-stepwise method. The immobilized lipase could produce biodiesel efficiently from various plant oils and waste oils.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.609-617
• /
• 2017

Lignocellulosic biomass is a renewable resource for production of biofuels and biochemicals. Furfural (FF) is an important platform chemical catalytically derived from the hemicellulose fraction of biomass. Tetrahydrofurfuryl alcohol (THFA) is a FF derivative and can be used as an eco-friendly solvent with thermal and chemical stability. Despite large numbers of experimental studies for catalytic conversion of FF to THFA, few research have conducted on the economic feasibility for large-scale THFA production from FF. At the stage of assessment of the potential for commercialization of conversion technology, a large-scale process study is required to identify technological bottleneck and to obtain information for solving scale-up problems. In this study, process simulation and technoeconomic evaluation for catalytic conversion of FF to THFA are performed, as the following three steps: integrated process design, heat integration, and economic evaluation. First, a large-scale process including conversion and separation processes is designed based on experimental results. When the FF processing rate is 255 tonnes per day, the FF-to-THFA yields are 63.2~67.9 mol%. After heat integration, the heating requirements are reduced by 14.4~16.4%. Finally, we analyze the cost drivers and calculate minimum selling price of THFA by economic evaluation. The minimum selling price of THFA for the developed process are $2,120~2,340 per tonne, which are close to the current THFA market price.

• KSBB Journal
• /
• v.23 no.6
• /
• pp.470-473
• /
• 2008

A pilot-plant biofilter ($1750\;m\;W{\times}2750\;mm\;L{\times}2000\;mm\;H$) packed with polyurethane foam ($20\;m\;W{\times}20\;mm\;L{\times}20\;mm\;H$) was installed in an pharmaceutical plant emitting gas streams containing n-hexane and alcohols. The biofilter was successfully operated for 74 days under highly fluctuating incoming concentrations at a residence time of 12.8-24.8 sec. Alcohols and n-hexane were removed by more than 90% from 5 and 20 days after start up, respectively. Malodor was also removed more than 95% from 20 days after start up.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.6
• /
• pp.501-511
• /
• 2014

Bio-oil derived from biomass through fast pyrolysis process has the potential to displace a significant amount of petroleum fuels. However, the use of bio-oil in a diesel engine is very limited because of its poor properties, e.g., its low energy density, low cetane number, and high viscosity. Therefore, bio-oil should be emulsified or blended with other fuels that have high centane numbers. Because bio-oil has poor miscibility with petroleum fuels, the most suitable candidate fuels for direct mixing are alcohol fuels. In this study, bio-oil was blended with ethanol, and two types of cetane improvers were added to a blended fuel to improve the self-ignition property. The two types of cetane improvers, PEG 400 and 2-EHN, made it possible for bio-oil blended fuels to combust in a diesel engine with a maximum bio-oil content of 15 wt%. A high-compression-ratio piston is also proposed for the combustion of bio-oil in a diesel engine.

• Food Science and Preservation
• /
• v.30 no.4
• /
• pp.669-682
• /
• 2023

The production of distilled soju by fermenting nonsteamed rice was evaluated using commercial enzyme products. White koji and modified nuruk had alpha-amylase activities of 31.90 U/g and 3,532.71 U/g, respectively, and gluco-amylase activities of 698.32 U/g and 4,899.58 U/g, respectively. The enzyme products had activities of 5,604.15-225,182.00 U/g and 13,517.41-120,822.41 U/g, respectively. At enzyme concentrations of >800 mg/L, the Chung-moo-purified enzyme had an alcohol productivity of ≥19%. Nurukzyme R400, Sanferm Yied, and Diazyme X4 exhibited alcohol productivities of >19% at concentrations of >600 mg/L. The alcohol content of the vacuum distillates was 41.31%-44.86%. The volatile component with the alcohol content adjusted to 25% was analyzed and principal component analysis was performed. The volatile components in white koji, Diazyme X4, and Sanferm Yield were similar. The modified nuruk treatment group had a relatively high ethyl lactate content compared to the white koji treatment group. The Nurukzyme R400 treatment group had high contents of butyric acid and ethyl butyrate. The Chung-moo-purified enzyme was characterized by a low component content. Thus, when enzyme products were used in nonsteamed rice fermentation, no effect on the alcohol productivity and quality of vacuum distilled soju was observed, suggesting that it can replace white koji and modified nuruk.