• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.6
• /
• pp.501-511
• /
• 2014

Bio-oil derived from biomass through fast pyrolysis process has the potential to displace a significant amount of petroleum fuels. However, the use of bio-oil in a diesel engine is very limited because of its poor properties, e.g., its low energy density, low cetane number, and high viscosity. Therefore, bio-oil should be emulsified or blended with other fuels that have high centane numbers. Because bio-oil has poor miscibility with petroleum fuels, the most suitable candidate fuels for direct mixing are alcohol fuels. In this study, bio-oil was blended with ethanol, and two types of cetane improvers were added to a blended fuel to improve the self-ignition property. The two types of cetane improvers, PEG 400 and 2-EHN, made it possible for bio-oil blended fuels to combust in a diesel engine with a maximum bio-oil content of 15 wt%. A high-compression-ratio piston is also proposed for the combustion of bio-oil in a diesel engine.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.176.2-176.2
• /
• 2011

전 세계는 화석연료의 과사용으로 에너지 고갈과 환경오염의 문제에 직면하고 있으며, 자연과 공존하며 지속성장할 수 있는 신재생에너지의 이용확대에 대한 개발이 부각되고 있다. 이에 따라 지속적인 발전과 함께 에너지보존 및 효율적인 환경보존을 위한 대체 가능한 새로운 에너지의 개발에 관심이 모아지고 있다. 최근 부각되고 있는 바이오에너지(바이오에탄올, 바이오디젤, 바이오가스 등)를 생산하는 여러 가지 새로운 바이오매스 중 해조류는 이산화탄소 흡수 능력이 매우 뛰어나고, 에너지 저장성이 우수하다는 장점이 있다. 본 연구에서는 새로운 바이오매스원인 해조류의 부산물의 표면 특성 및 바이오복합재료의 보강재로써의 이용가능성에 대해 분석하였다. 바이오복합재료에서 소수성인 고분자와의 상호보완적 계면 결합은 보강재의 중요한 특성 중 하나이다. 해조류 부산물의 표면을 화학적 처리함으로써 폴리머 매트릭스와 해조류 부산물 사이의 계면결합이 향상됨을 기대할 수 있으며 이에 따라 해조류 부산물을 보강재로 사용한 바이오복합재료의 기계적 강도 또한 향상됨을 기대할 수 있다. 본 연구에서는 원자힘현미경(Atomic force microscope; AFM)을 사용하여 해조류 부산물의 화학적 처리에 따른 표면특성을 관찰하였으며, 친환경적인 바이오매스인 해조류 부산물을 바이오복합재료의 보강재로써의 이용가능성에 대해 연구함으로써, 지구온난화의 주원인인 온실가스 발생을 줄이고, 자원고갈이라는 에너지 위기를 극복할 수 있는 친환경적인 대안을 제시 할 수 있다.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.664-668
• /
• 2009

"Boram" is a new $F_1$ hybrid of rapeseed (Brassica napus L.) with early maturing, high yield and high oleic acid. This cultivar was developed from the cross between Mokpo-CGMS (male steile line) and 8634-B-1-3-1-8 (restore line) for the production of edible oil and biodiesel in 2006. Yield trials were conducted from 2007 to 2008 and regional adaptation trials were examined at four locations in 2008. "Boram" has green and parted leaf, yellowish flower, and black seed coat. The ripening period of "Boram" is similar to "Sunmang", but 3 days faster than "Tammiyuchae". The average seed yield of the regional adaptation trials was 424 kg/10a, which was 11 and 48% higher than "Sunmang" and "Tammiyuchae" variety. Total oil content of "Boram" was 44.2%. In fatty acid composition, "Boram" has no erucic acid. However, oleic acid content is 68.5%, which is 3.7 and 5.4% higher than "Tammiyuchae" and "Sunmang". And total glucosinolate content was 2.27mg/g. Therefore this variety is recommended as a leading variety at southwestern areas including Jeonnam, Jeonbuk and Kyeongnam provinces and Jeju island of Korea.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.236-240
• /
• 2010

'Jomang' is a new $F_1$ hybrid variety of rapeseed (Brassica napus L.) with early maturation, high yield and high oleic acid. This hybrid variety was developed from the cross between Mokpo-CGMS (male sterile line) and 8516-B-5-6-5-3 (restore line) for the production of edible oil and biodiesel in 2006. Yield trials were conducted from 2007 to 2008, and regional adaptation trials were examined at four locations in 2008. 'Jomang' has green and parted leaf, yellowish flower and black seed coat. The ripening date of 'Jomang' is 1~4 days earlier than 'Sunmang' and 'Tammiyuchae'. The average seed yield of the regional adaptation trials was 406 kg/10a, which was 7% and 42% higher than those of 'Sunmang' and 'Tammiyuchae,' respectively. Total oil content of 'Jomang' was 44.5%. 'Jomang' has no erucic acid in fatty acid composition. However, oleic acid content is 68.2%, which is 3.4% and 5.1% higher than 'Tammiyuchae' and 'Sunmang,' respectively. Total glucosinolate content was 2.31 mg/g. Therefore, this variety is recommended as a leading variety at southwestern area including Jeonnam, Jeonbuk and Kyongnam provinces and Cheju island of Korea.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.1
• /
• pp.38-44
• /
• 2015

We have investigated the productivity of microalgae, Nannochloropsis sp., using highly efficient vertical photobioreactor which has been developed by the company IMBiz. This experiment was performed in the field for one month with 2 sets of 2 tons of media under autotrophic cultural mode. In the culture with 0.1% of $CO_2$, the average daily productivity was shown to be up to 0.953g per liter, and 0.574g per liter in the culture with only ambient air. The temperature ranged from $20^{\circ}C$ to $31^{\circ}C$, and it didn't make any differences on the productivity. The light intensity ranged from 5,000 Lux to 40,000 Lux. The light has been appeared to have a very close relationship with the productivity of microalgae. Meanwhile, the harvesting method of pressurefloating attempted in this photobioreactor was found to be very effective.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.762-767
• /
• 2009

In this study, the feasibility of using vegetable oil extracted from tropical crop seed as a biodiesel feedstock was investigated by producing biodiesel and analysing the quality parameters as a transport fuel. In order to produce biodiesel efficiently, two step reaction process(pre-treatment and transesterificaion) was required because the tropical crop oil have a high content of free fatty acids. To determine the suitable acid catalyst for the pre-esterification, three kinds of acid catalysts were tested and sulfuric acid was identified as the best catalyst. After constructing the experimental matrix based on RSM and analysing the statistical data, the optimal pre-treatment conditions were determined to be 26.7% of methanol and 0.982% of sulfuric acid. Trans-esterification experiments of the pre-esterified oil based on RSM were carried out, then discovered 1.24% of KOH catalyst and 22.76% of methanol as the optimal trans-esterification conditions. However, the quantity of KOH was higher than the previously established KOH concentration of our team. So, we carried out supplemental experiment to determine the quantity of catalyst and methanol. As a result, the optimal transesterification conditions were determined to be 0.8% of KOH and 16.13% of methanol. After trans-esterification of tropical crop oil, the produced biodiesel could meet the major quality standard specifications; 100.8% of FAME, 0.45 mgKOH/g of acid value, 0.00% of water, 0.04% of total glycerol, $4.041mm^2/s$ of kinematic viscosity(at $40^{\circ}C$).

• LP가스
• /
• s.105
• /
• pp.43-50
• /
• 2006

연료로서의 DME 디메틸에테르(화학식 CH -O-CH ,DME)는 당초 가정용 캔 스프레이 등 분사 약제인 프레온의 대체 물질로 사용되기 시작했다. 그 후 양호한 압축 착화성이나 무연 연소하는 성질을 가지는 등 디젤 엔진의 연로로서 LP 가스와 동등한 증기압을 가져 LP가스의 대체연료로서 현재 전 세계에서 활발히 연구개발이 이뤄지고 있다. DME의 재료는 천연가스, 석탄, 바이오매스 등 다양한 자원에서 제조가 가능한데 이들로부터 합성가스(CO,H )를 추출.합성해 제조한다. 이것은 경제규모에 미달하는 부존자원의 유효한 이용이나 자원의 다양화에도 연결되기 때문에 차세대 연료로서 주목받고 있다. 천연가스로부터 저가로 대량 생산이 가능한 직적법이나 메탄올을 탈수해 제조하는 간접법 등 제조 기술도 확립되어 있다.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.628-632
• /
• 2013

Arthrospira platensis (A. platensis) is an economically important microalgae because it has carbohydrates, lipids, proteins and a number of phytochemicals. It is also a valuable source used in the production of biodiesel and functional foods. In this study, A. platensis was exposed to electron beam irradation (240 kGy) and induced random mutagenesis for strain improvement. Several mutants were obtained, and the resulting mutant was designated as EB29. The growth rate and chlorophyll content of EB29 was similar to those of wild type. However, the lipid content of EB29 was increased seven-fold compared to that of wild type when comparing the nile red fluorescent intensity. Semi-quantitative analysis of EB29 using the calibration plot of standard lipid, triolein, represented $78.6{\mu}g/mL$, which increased 2 times compared to wild type ($41.4{\mu}g/mL$). When analyzing the fatty acid profile of EB29, polyunsaturated fatty acids (PUFAs), such as gamma-linolenic acid (GLA) in EB29 increased about six-fold. Moreover, fatty acids affecting the quality of biodiesel increased compared to that of wild type. Thus, electron beam could be used for the strain improvement of microalgae in order to accumulate PUFAs and alteration of fatty acid profile for biodiesel.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.759-765
• /
• 2012

As the biodiesel production is increasing rapidly, the crude glycerol, which is principal by-product of biodiesel production, has also been generated in a large amount. Many research studies on value-added utilization of glycerol are under investigation. 1,3-Propandiol is a promising chemical which can be produced from fermentation of glycerol because the application of 1,3-propanediol is mainly in the production of bio-PTT (Poly(trimethylene terephthalate). However, the cost of downstream processes in the biological production of 1,3-propanediol can make a high portion in the total production cost. This review summarizes the present state of separation processes in each step studied for the removal of impurities and the recovery of 1,3-propanediol from its fermentation broth. Furthermore, ATPE (Aqueous Two Phases Extraction) process is suggested as an attractive alternative for the primary separation process of 1,3-propanediol because ATPE is convenient for the simultaneous removal of microbial cells and impurities such as salts of organic acids and the separation of 1,3-propanediol from fermentation broth.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.4
• /
• pp.93-103
• /
• 2006

Biogas is a byproduct after anaerobic digestion of organic materials and has been used as an energy source for heating and generating electricity. Demands of methanol for fuel mixed with gasoline and reactant in biodiesel production are steadily being increased. In this review, we summarized recent advancements in direct partial oxidation of methane to methanol with the brief history of methanol synthesis. The steam reforming and the catalytic oxidation of methane to methanol were compared, the former of which are mainly used in industrial scale and the latter in a stage of research and development. On the basis of this review, the possibility of methanol conversion from biogas was proposed in the aspects of the technological feasibility and the economical practicability.