• Korean Journal of Materials Research
• /
• v.7 no.5
• /
• pp.423-430
• /
• 1997

졸-겔 dip coating법에 의해 제조한 바륨페라이트 박막의 미세구조와 결정학적인 구조 특성에 관해 조사하였다. 기판에 형성된 바륨페라이트 입자는 침상 형태의 입자들로 구성되어 있었으며, C축은 장축 방향이었고, 막 두께가 증가함에 따라 침상형 입자들은 기판에 평행하게 배향하는 경향을 나타내었다. 박막은 바륨페라이트층, Ba, Fe, SiO$_{2}$로 구성되어 있는 중간층, 그리고 기판층인 SiO$_{2}$층으로 구성되어 있었으며, 중간층과 SiO$_{2}$층간의 계면은 Ba 와 SiO$_{2}$간의 화합물로 구성되어 있었다. 침상 형태의 입자는 95$0^{\circ}C$에서 3시간 열처리하므로써 완전히 소실하였고, 130$0^{\circ}C$에서 3시간 열처리하므로써 c면이 기판에 평행하게 위치하는 완전한 육각판상 형태의 입자로 변화되었다.

• Journal of the Korean Magnetics Society
• /
• v.19 no.6
• /
• pp.203-208
• /
• 2009

Magnetic and Ka-band absorbing properties have been investigated in Ti-Co substituted M-type barium hexaferrites with $BaTi_{0.5}Co_{0.5}Fe_{11}O_{19}$ composition. The ferrite powders were prepared by conventional ceramic processing technique and used as absorbent fillers in ferrite-rubber composites. The magnetic properties were measured by vibrating sample magnetometer. The complex permeability and dielectric constant were measured by using the WR-28 rectangular waveguide and network analyzer in the frequency range 26.5~40 GHz. For the Ti-Co substituted M-hexaferrites, the ferromagnetic resonance is observed at Ka-band (29.4 GHz). The matching frequency and matching thickness are determined by using the solution map of impedance matching. A wide band microwave absorbance is predicted with controlled ferrite volume fraction and absorber thickness.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.05a
• /
• pp.65-66
• /
• 1991

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.96-97
• /
• 2003

• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.11a
• /
• pp.30-31
• /
• 1991

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.37-44
• /
• 1997

Barium ferrite thin films on the thermal oxidized Si substrate were prepared by using sol-gel method (dip coating) from the sol of composition ratio of 5.25, designated by mole ratio 2Fe/Ba. The gelation process was largely divided into 4 step, and the sol prepared by reaction for 90 minutes at 8$0^{\circ}C$ was the suit-able for coating. Needle shaped particles formed on the coating layer were placed parallel to substrate and the inclination was increased with film thickness. The easy-direction of magnetization of needle shaped par-ticles was long-axis direction.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.182.1-182
• /
• 2003

• Proceedings of the Korean Magnestics Society Conference
• /
• 2001.04a
• /
• pp.76-77
• /
• 2001

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.156-156
• /
• 1999

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.05a
• /
• pp.137-137
• /
• 1999