• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.277-285
• /
• 2019

This study was conducted to understand the growth characteristics of Picea jezoensis that was one of representative subalpine species in Korea, in the light of the effects of wind and micro-topography in its habitats on Mt. Deogyu, Korea. The prevailing wind directions were southwest and west at the study sites. We randomly selected P. jezoensis (height ≥ 1.5 m) on windward, intermediate, and leeward slopes and measured diameter at breast height (DBH), height, crown length by 8 directions in upper, middle and lower sectors of the crown. We examined the micro-topography of P. jezoensis stood on and classified it into 3 types: type 1 was mounded and fully exposed to surrounding environments without neighboring trees; type 2 was somewhat wind-protected by surrounding rocks, but no neighboring vegetation; type 3 was on gentle slope or flat where P. jezoensis grew with neighboring trees or shrubs. The ratios of height to DBH, and estimated crown growth to actual crown growth (hereafter crown growth ratio) were compared among the three types of micro-topography on windward, intermediate and leeward sites. The height growth per DBH and crown growth ratio in the upper and middle crowns were the smallest on the windward site, and the highest on the leeward site (p < 0.01). The crown growth ratio on type 1 on the windward site was only 46% of that on type 3 on the leeward site. Although on the same windward slope, trees on type 1 had more deformed crown shapes than that on Type 3, showing asymmetric crown cross-sectional areas. Wind and micro-topography played critical roles on the crown growth of P. jezoensis.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.112-112
• /
• 2012

스포츠웨어 중 바람막이제품의 용도에 사용되는 소재는 폴리에스터와 폴리아미드 소재가 주류이며, 그 중에서 고품격의 바람막이 제품에 대해서는 주로 나일론6 소재를 사용하고 있다. 최근 소비자들은 삶의 질 향상과 야외활동의 증가로 인해 제품의 경량화, 안락한 착용감, 고기능성 등을 동시에 겸비한 제품을 요구하고 있다. 이러한 수요에 발맞추어 국내에서 많이 생산되고 있는 나일론6 소재를 이용하여 제품화 간계에서 경량감과 신축성이 발현될 수 있는 나일론6 소재의 경량 신축직물에 대한 연구개발이 요구되고 있다. 본 연구에서는 직물 단계에서의 경량감과 신축성이 발현될 수 있는 나일론6 소재 신축직물을 개발하기 위해 공중합 나일론6 폴리머와 일반 나일론6 폴리머를 복합방사 설비를 이용하여 side by side POY 26d/6f의 원사를 제조한 후 가연공정을 거쳐 개발된 DTY 20/6f 가연사를 직물 설계 시 위사방향으로 적용하여 제직을 실시하였다. 직물 설계 조건은 기존 T사에서 생산중인 나일론 DTY 20d/7f을 경사로, 개발 소재인 DTY 20/6f을 위사에 적용하였으며, 제직 시 경사밀도 2가지, 위사밀도 2가지로 설계하였으며, 조직의 변화에 따른 신축특성의 변화를 확인하기 위해 평직, Rib. 도비직으로 제직하였고, 이렇게 제조된 직물에 대해 전처리, 염색, 후가공, 코팅가공 공정 조건별로 테스트를 진행한 후, 신축성발현을 위한 최적 공정조건 확보를 위한 공정별 직물의 신축성 변화분석과 최적 공정을 통해 개발한 최종 직물에 대한 신축성 평가를 실시하였다. 테스트 결과, 제직 조건별로는 경사밀도와 위사밀도가 낮은 경우가 원단 내 수축이 더욱 많이 발생함으로써, 신축성이 향상됨을 알 수 있었으며, 조직별로는 평직, Rib. 도비직 순서로 신축성이 우수함을 알 수 있었다. 또한 공정별 신축성 변화분석 결과, 염색 시 가장 신축성 발현이 두드러지게 높은 것으로 나타났으며, 전처리는 일반 연속식 전처리 보다 CPB 전처리 공정이 이후 염색가공 및 코팅을 통해 제조된 직물의 신축성 향상 및 표면 평활성에 높은 기여를 하는 것을 알 수 있었다. 상기 조건에 서 얻어진 최적 공정 조건으로 제조된 최종 코팅직물의 경우에 22% 정도의 신축성이 나타나 개발 소재의 신축특성이 우수함을 확인하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.3
• /
• pp.420-432
• /
• 2009

The purpose of this study is to survey the present women's golf windbreaker market to develop the trendy product with supplementing design and functionality by grasping the inconvenient part through the result of the questionnaire. According to the questionnaire, 38.1% said that the armhole is the most inconvenient part by tightfitting. Therefore, a mobility of wearer was enhanced by giving shirring detail to the armhole for flexibility through inserting the elastic band with a regular interval around armhole in the design1. The swing movement was allowed to be convenient by attaching knit to the side panel. And, the sleeves were designed in the detachable form so those are allowed to be produced in two kinds such as long sleeves and short sleeves. In the design2, a zipper was inserted from the neckline to the armhole so it is designed a detachable bolero. Furthermore, it was designed to be possible to wear two different way as a jumper style and a vest style. Given wearing a vest, the sleeve part was patched knit, thereby having enhanced activity. The design1 and the design2 evaluated an objective assessment and subjective assessment. Assessment group consists of 5 subject groups and 10 expert groups to evaluate external appearance and movement adaptability. In the external appearance evaluation, the design1 obtained the better evaluation than design2. In the movement adaptability evaluation, the design1 obtained the better evaluation than the design2 for all of the items except the wrist area. In the group of professionals, the design1 obtained the better evaluation than the design2 for all of the items except the bottom area.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.955-964
• /
• 2022

According to the statistics of maritime accidents statistics that have occurred in Korea over the past five years, maritime accidents caused by fishing boats have increased every year from 1,646 in 2016 to 2,100 in 2020. In particular, of the 378 capsizing accidents that have occurred in the past five years, 252 capsizing accidents of fishing boats account for a high proportion of 66.7%, therefore, it is urgent to come up with countermeasures. In this study, to determine the cause of the capsizing accident of fishing boat No. 66 poongsung, data such as stability and seawater inflow routes were collected, and the effects of waterproof, additional wood decks, and windbreakers on stability on were quantitatively analyzed. Additional decks, windbreakers, and waterproof installed in No. 66 poongsung cause initial list, deteriorate stability, and fail to meet fishing boat structural standards. In addition, it was analyzed that the stability was weakened due to the characteristics of the hull shape of No. 66 poongsung. To estimate the stability at the time of the accident, the stability at the time of the working in the fishing ground condition, amount of seawater inflow according to the change in sea conditions, hull oscillation situation, and change in stability due to the hull factor were calculated. As a result, the minimum GoM was satisfied at the time of working in the fishing ground, but it could not be restored at the maximum wave height of 4 m, and the minimum GoM was not satisfied at the maximum wave height of 4 m owing to the influence of seawater inflow and oscillation due to the hull list. However, the minimum GoM was satisfied if additional decks and windbreakers installation was excluded among the factors affecting the stability of No. 66 poongsung.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.226-234
• /
• 2015

To provide the data necessary to determine exposure coefficients used for calculating the snow load acting on a greenhouse, we compared the exposure coefficients in the greenhouse structure design standards for various countries. We determined the exposure coefficient for each region and tried to improve on the method used to decide it. Our results are as follows: After comparing the exposure coefficients in the standards of various countries, we could determine that the main factors affecting the exposure coefficient were terrain roughness, wind speed, and whether a windbreak was present. On comparing national standards, the exposure coefficients could be divided into three groups: exposure coefficients of 0.8(0.9) for areas with strong winds, 1.0(1.1) for partially exposed areas, and 1.2 for areas with dense windbreaks. After analyzing the exposure coefficients for 94 areas in South Korea according to the ISO4355 standard, all of the areas had two coefficients (1.0 and 0.8), except Daegwallyeong (0.5) and Yeosu (0.6), which had one coefficient each. In South Korea, the probability of snow is greater inland than in coastal areas and there are fewer days with a maximum wind velocity > $5m{\cdot}s^{-1}$ inland. When determining the exposure coefficients in South Korea, we can subdivide the country into three regions: coastal areas with strong winds have an exposure coefficient of 0.8; inland areas have a coefficient of 1.0; and areas with dense windbreaks have an exposure coefficient of 1.2. Further research that considers the number of days with a wind velocity > $5m{\cdot}s^{-1}$ as the threshold wind speed is needed before we can make specific recommendations for the exposure coefficient for different regions.

• Journal of Korean Association for Spatial Structures
• /
• v.14 no.2
• /
• pp.51-58
• /
• 2014

Meteorological observatories use measuring boards on even ground in open areas to measure the amount of snowfall. However, it is very difficult to evaluate the accurate amount of snowfall because of the effects of the wind. Therefore, this study tried to determine the internal wind flow inside a windbreak fence to identify an area that was not affected by wind in order to measure the snowfall. We performed a computational fluid dynamics analysis, wind tunnel test of the type and height of the windbreak fence, and analyzed the wind flow inside the fence. The results showed that a double windbreak fence was better than a single windbreak fence for reducing the wind velocity. The reduction of the wind velocity was highest in the middle of a windbreak fence with a width of 4 m and a height of 60cm, where the windbreak fences were fixed to the ground.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.94-94
• /
• 2011

스포츠웨어 바람막이용도에 사용되는 대부분의 소재는 폴리아미드계 소재이며, 국내에서는 대부분 나일론6 소재를 사용하고 있다. 최근 소비자들의 요구는 점점 경량화되고 있고 야외활동 증가와 더불어 착용감이 우수한 소재를 요구하고 있다. 이러한 시즘에 국내에서 많이 사용되는 나일론6 소재를 이용하여 직물단계에서 경량감과 스트레치성이 발현될수 있는 나일론6 세섬 권축사 개발에 대한 연구를 진행하고자 함이다. 본 연구에서는 직물단계에서 경량감과 스트레치성이 발현될수 있는 나일론6 세섬 권축사 개발을 위해 공중합 나일론6 폴리머와 일반 나일론6 폴리머를 복합방사설비를 이용하여 SIDE BY SIDE POY 26d/6f 원사를 제조하였다. 원사물성은 섬도 25.8d, 절단신도 71%, 절단강도 4.3g/d의 물성을 가졌으며, Nip Belt 가연설비로 연신비, 가연 1st 히터온도, 벨트각도 조건에 따라서 제조된 나일론6 가연사 DTY 20d/6f의 물성을 평가하였고, 비교사로서 T사에서 생산되고 있는 나일론6 가연사 DTY 20d/6f와 비교평가하였다. 비수탄성율은 가연 연신비가 높고, 1st 히터온도가 높은 조건에서 높게 나타남을 알 수 있었으며, 염색 가공 공정에서의 전처리단계에서 $100^{\circ}C$정도의 열을 받았을 때의 수축에 따른 권축효과 발현에 따른 신축성 변화에 대한 상대평가를 사단계에서 유추할 수 있다. 권축효과가 높게 나타난다 하더라도, 사의 수축힘이 적으면 권축효과 발현특성에 큰 차이가 없으므로 열응력을 측정을 한 결과, 가연 연신비가 높고 가연 1st 히터온도가 높은 조건에서 열응력이 높게 나타남을 알 수 있었으며, 비교사에 비해 약간 높은 열응력 값을 보였다. 절단강도는 가연조건에 따라서 큰 변화가 없었고, 절단신도는 연신비가 증가함에 따라 점차 감소하였으며 비교사와도 큰 차이를 보이지 않았음. 따라서, POY 26d/6f 원사에 적합하고, 권축효과가 우수한 가연조건을 도출하였고, 가연현장 작업시 문제가 없는 가연 최적조건을 도출하였다. 향후, 가연조건에 따른 제조된 가연사를 이용하여 제직 및 염색가공 공정을 거친후, 직물신축성 평가를 실시할 계획이다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.2
• /
• pp.179-185
• /
• 2011

A marine collision accident occurred at the Jin-do water way. A barge loaded with heavy equipment of Power Generation Plant was being towed at its side by two tugs "A" and "B" from Byeg-pa harbour to the designated position to be used for power generation plant near Jin-do bridge. The Power Generation Plant was 40-meters high loaded atop the barge. When the "tugs and tow" were approaching the Jin-do the bridge, the two towing tugs lost maneuvering control of the barge and it went off-course, hit first the waterway embankment and finally struck the lower part of bridge's span and post musing the barge to capsize and sunk its cargo into the sea. The bridge also suffered damages where the top of the Plant struck At the time of the accident, there was a strong tidal current at the waterway. This paper calculates the safe towing force of barges with heavy loads when traversing in a strong tidal current situation in narrow waterway.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.19-32
• /
• 2014

The purpose of this paper is to obtain reliable rainfall data for runoff simulation and other hydrological analysis by the calibration of gauge rainfall. The calibrated gauge rainfall could be close to the actual value with rainfall on the ground. In order to analyze the wind effect of ground rain gauge, we selected the rain gauge sites with and without a windshield and standard rain gauge data from Chupungryeong weather station installed by standard of WMO. Simple linear regression model and artificial neural networks were used for the calibration of rainfalls, and we verified the reliability of the calibrated rainfalls through the runoff analysis using $Vflo^{TM}$. Rainfall calibrated by linear regression is higher amount of rainfall in 5%~18% than actual rainfall, and the wind remarkably affects the rainfall amount in the range of wind speed of 1.6~3.3m/s. It is hard to apply the linear regression model over 5.5m/s wind speed, because there is an insufficient wind speed data over 5.5m/s and there are also some outliers. On the other hand, rainfall calibrated by neural networks is estimated lower rainfall amount in 10~20% than actual rainfall. The results of the statistical evaluations are that neural networks model is more suitable for relatively big standard deviation and average rainfall. However, the linear regression model shows more suitable for extreme values. For getting more reliable rainfall data, we may need to select the suitable model for rainfall calibration. We expect the reliable hydrologic analysis could be performed by applying the calibration method suggested in this research.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.93-93
• /
• 2011

스포츠웨어 바람막이용도에 사용되는 대부분의 소재는 폴리아미드계 소재이며, 국내에서는 대부분 나일론6 소재를 사용하고 있다. 최근 소비자들의 요구는 점점 경량화되고 있고 야외활동 증가와 더불어 착용감이 우수한 소재를 요구하고 있다. 이러한 시즘에 국내에서 많이 사용되는 나일론6 소재를 이용하여 직물단계에서 경량감과 스트레치성이 발현될수 있는 나일론6 경량 Mechanical 스트레치 직물 개발에 대한 연구를 진행하고자 함이다. 본 연구에서는 직물단계에서 경량감과 스트레치성이 발현될수 있는 나일론6 경량 Mechanical 직물개발을 위해 공중합 나일론6 폴리머와 일반 나일론6 폴리머를 복합방사설비를 이용하여 SIDE BY SIDE POY 26d/6f 원사를 제조한 후, Nip Belt 가연설비로 연신비, 가연 1st 히터온도, 벨트각도 조건에 따라서 제조된 4가지의 나일론6 가연사 DTY 20d/6f와 T사에서 생산되고 있는 나일론6 가연사 DTY 20d/7f를 동일한 직물설계 조건에서 위사방향으로 제직을 실시하였다. 직물설계 조건은 경사를 나일론 DTY 20d/7f, 경사밀도는 2가지, 위사밀도 2가지으로 설계하여 제직하였으며, 이렇게 제조된 직물(생지)를 일반 나일론6 염색가공 공정조건으로 전처리, 염색, 가공, 코팅 공정을 거친후, 신축성 평가를 실시하였다. 동일한 제직조건 및 염색가공 조건에서 제조된 직물의 신축성은 가연조건인 가연 연신비가 높고, 가연 1st 히터온도가 높은 조건에서 높게 나타남을 알 수 있었다. 경사밀도가 낮은 조건이 수축이 많이 진행됨을 알 수 있었으며, 가연조건인 가연 연신비가 높고, 가연 1st 히터온도가 높은 조건에서 수축이 더 많이 이루어짐을 알 수 있었다. 권축률이 높은 가연사 조건이 그만큼 수축이 많이 들어옴을 나타내는 결과로 사료되며, 위사밀도가 낮은 조건이 수축이 좀 더 많이 진행됨을 알 수 있었으며, 위사밀도가 너무 많으면 가연사끼리 상호 수축할 수 있는 정도를 감소시키는 결과로 판단된다. 전처리, 염색가공, 코팅이 완료된 최종 원단의 신축성 평가를 실시한 결과, 비교사로 제직된 최종 원단은 8~10%수준, 가연사 제조조건에 따른 제조된 4가지의 가연사의 신축성은 12~18%의 신축성을 보임을 알수 있었다. 향후, 제직설계 및 염색가공 조건의 다양화로 연구를 진행할 계획이다.