• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.1
• /
• pp.46-54
• /
• 2013

Two different UHPCCs having different fiber lengths and volume fractions are considered to be applied to bridge decks. The objective of this study is to estimate cracking resistance of the two UHPCCs. The notched beam tests were performed with the UHPCCs, and the relationships between load and CMOD(Crack Mouth Opening Displacement) were obtained from the tests. The tensile stress and crack opening relationships optimally fitting the measured load-CMOD curves were found through the inverse analyses. The UHPCC with 2% volume fraction of 13 mm long fiber has lower fracture energy than the UHPCC with 0.5% and 1.0% volume fractions of 16.3 mm and 19.5 mm long fibers, respectively. It indicates that the latter UHPCC is more effective in uniformly distributing crack formation and reducing crack width.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.99-106
• /
• 2011

This study performed research for improvement on basic concept of PBD applying suitable design method before and after LB-DECK composition. According to study, in this case, before composition, it can reduce minuteness cracks by increasing bending tensile strength utilizing polymer concrete, can expect sensuous effect, improve durability as to low permeability, and was evaluated that can reduce covering depth according as it. Also, because LB-DECK baseplate that apply the empirical design method composite is superior load resistance ability than general baseplate, safety is increased, it is expected to secure constructibility and economic performance at the same time because reinforcement arrangement method and reinforcement amount are fixed even if span effective span is increased at ultimate strength design method application.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.62-69
• /
• 2010

In this study, the serviceability performance of Waffle Shaped(WAS) and Double-Tee(DT) precast concrete slabs were evaluated and compared based on the vertical acceleration magnitude induced by walking and heel drop loads. Tests were conducted for practical building structures of which floor systems used WAS and DT slabs. Natural frequencies of the slabs were similar to those obtained by using analytical models. The measured acceleration level was evaluated by vertical floor acceleration criteria presented by ISO-2631, AIJ(1991, Japan) and a previous study regarding floor vibration limit. Test results showed that both WAS and DT slabs satisfied all the criteria and Peak acceleration level of WA slabs was lower than that of DT slabs.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.191-197
• /
• 2005

Biped walking is the main feature of a humanoid robot. In a biped walking robot, there are many actuators to be controlled and many sensors to be interfaced. In this paper, we propose a DSP-based controller for a miniature biped walking robot with 21 RC servo motors. The proposed controller has a hierarchical structure; a host PC, a DSP-based main controller, and an auxiliary controller with an FPGA chip. The host PC generates and transmits the robot walking data for given walking parameters such as stride, walking period, etc. The main controller implemented with a TMS320LF2407A controls 21 RC servo motors via the auxiliary controller. We also perform some experiments for balancing motion and walking on a slope terrain with interfacing a 2-axis acceleration sensor and a TMS320LF2407A.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.277-280
• /
• 2008

In this paper behavior of U-Channel Bridge (UCB) was studied, and a new analysis model was proposed. Most of the time, permanent and traffic load actions are directly transmitted to main beams located under the carriageway, one of the most distinctive features of UCB is that the edge beams that support the bridge are above the deck, in contrast with a conventional overpass system. In This study models used with the frame elements, the frame and plate elements, and the solid elements were constructed. Assuming that the results of solid models were similar to the real behavior of UCB, results of another models was compared. The results of the models used with the frame and plate elements were similar to the results of solid models, the model used with the frame and plate elements was proposed as an analysis model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.145-145
• /
• 2012

일반적으로 식생하도에서는 다양한 흐름저항 발생으로 인해 통수능은 감소하고 홍수위는 증가할 수 있다. 식생하도 흐름해석을 위해서는 복합적으로 발생하는 흐름저항이 합리적으로 산정되어야 한다. 하도 흐름에 식생을 고려하는 중요한 관점 중 하나는 식생높이에 대한 수심의 비이다. 본 연구에서는 수심이 식생높이보다 큰 즉, 침수식생 조건에서 식생층의 평균유속 산정식을 제시하고자 하였다. 문헌조사 결과 식생층의 평균유속 산정 방법은 크게 두 가지로 구분되었다. 첫 번째는 흐름을 정상, 등류로 가정하고 전 수심에 대한 힘의 평형을 해석하는 것이고(Stone and Shen, 2002), 두 번째는 2층 구조로 분리하여 식생층과 표면층사이에서 발생하는 전단력을 힘의 평형에 포함시키는 것이다(Baptist et al., 2007; Huthoff et al., 2007; Yang and Choi, 2010). Stone and Shen(2002)의 경우 일부 유속을 과대 산정하는 결과를 보였고, 이는 층간 전단력이 무시되었기 때문이다. 따라서 본 연구에서도 2층 구조론을 이용하였다. 그러나 식생의 밀도가 증가하게 되는 경우 식생이 차지하는 부피는 증가하는 반면, 바닥 전단력의 영향은 감소하게 되므로 식생의 부피는 고려하되 바닥 전단력은 무시하였다. 본 연구를 통해 제시한 식생층 평균유속식을 기존 연구의 수리모형실험 결과와 비교한 것은 <그림 1>과 같다. 비교적 일치하는 결과를 보였지만 Dunn et al.(1996), Rowinski et al.(2002)의 실험결과에 대해서는 유속을 과대 산정하는 것으로 나타났다. 이 들 실험조건의 특징은 침수비가 모두 2.0보다 작다는 것이다. 따라서 침수비 조건에 따라 전단력 ${\tau}_i$의 영향이 있는 것으로 판단된다. 본 연구에서는 침수비 2.0을 기준으로 이보다 낮은 침수비에서는 전단력 ${\tau}_i$를 무시하고, 2.0이상에서는 ${\tau}_i$를 고려한 침수식생하도 식생층 평균유속 산정식을 제시하였고 수리실험결과와 비교한 결과 <그림 2>와 같이 수용할 만한 결과를 얻었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2414-2418
• /
• 2014

This study carried out three-dimensional finite element analysis and structural safety evaluation of attachable roadside barriers. The effects of diaphragm distance and the number of bolts on displacements and maximum stresses for various parameters are studied using the LS-DYNA finite element program for this study. In this study, the existing finite element analysis of barriers using the LS-DYNA program is further extended to study static behaviors and structural safety of the barrier with module structures connected by anchor bolt inserted through concrete bridge decks. The numerical results for six parameters are verified by comparing different models with displacements and stress distribution occurred in the barrier and shows good structural performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.222-222
• /
• 2010

수평성장 방식을 이용하여 다결정 실리콘 리본을 제조하였으며, 제조된 리본의 미세구조 및 결함을 분석하였다. 기존 잉곳 성장 및 절단 공정을 통해 제조된 실리콘 웨이퍼는 절단 중 실리콘의 손살 때문에 단가를 상승 시킨다. 따라서 실리콘 용탕으로부터 직접 웨이퍼를 제조하는 리본 기술이 활발히 연구되고 있다. 본 연구에서는 수명 성장 법을 이용하여 용융 실리콘으로부터 다결정 실리콘 리본을 제조 하였다. 제조 된 리본의 크기$50{\times}50$ mm였으며 두께는 $375{\pm}50{\mu}m$ 이었다. 또한, 미세구조 분석 결과 결정들의 형상이 불규칙적 이었으며, 바닥에서부터 윗부분까지 한 방향으로 성장되었다. 수직성장된 결정들의 평균 입경은 $50.2{\mu}m$ 이었다. 전위 (dislocations ), 이중(twins), 그리고 기공 (pores) 같은 구조적 결점들과 SiC, 탄소, 그러고 산소와 같은 불순물 결함 등이 관찰 되었다. 본 연구를 통해 제조된 다결정 실리콘 리본은 태양전지용 웨이퍼로 응용 가능 할 것으로 판단된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.701-708
• /
• 2016

A new design for an ultra-wideband microstrip-to-FGCPW(Finite Ground Coplanar Waveguide) transition is presented. The proposed transition provides the electric field and impedance matching between adjacent transmission lines by ground shaping. The transition is designed on the analytical expressions of whole transitional structure. Conformal mapping is applied to obtain the characteristic impedance of FGCPW with bottom aperture within 3.3 % accuracy as compared with the EM-simulation results. As design example, the fabricated transition in back-to-back configuration provides insertion loss less than 1 dB per transition and return loss better than 10 dB for frequencies from 9 GHz to over 40 GHz.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.148-157
• /
• 1997

In this paper, the flow around a V-shaped plate positioned against horizontal flow is numerically simulated by using finite volume method and experimentally visualized in two dimensional tank by dye injection method. The upwelling flow artificially induced by V-shaped plate mixes the stratified stagnant flow. It can be applied to mitigate the eutrophication and stratification of sea in the vicinity of offshore structures.