• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1474-1481
• /
• 2011

This study investigated the physicochemical characteristics of Korean wheat flour substituted for 0%, 15%, 30%, 45%, and 60% durum rimachinata wheat in order to develop a Korean wheat pasta suitable for consumer-preferred soft textures. The particles of Korean wheat that were less than 250 ${\mu}M$ were 87.03% of all particles, while 68.7% of durum rimachinata had particles more than 250 ${\mu}M$ in size. Durum rimachinata had more protein (13.84${\pm}$0.03) and ash (0.70${\pm}$0.02) than Korean wheat. In farinograph characteristics, water absorption, development time, stability, and weakness increased as the amounts of substituted Korean wheat flour increased. Also, the gelatinization characteristics of the amylograph exhibited an increase of gelatinization temperature and decrease in maximum viscosity. However, maximum viscosity was shown to be more than 550 B.U. until 30% of the substitution level of Korean wheat flour to durum rimachinata wheat. Also, it did not affect the texture of the noodle product. We could make pasta with softness and springiness with less than a 15% substitution level of Korean wheat flour due to similar characteristics in cooking properties such as weight, volume, water absorption, turbidity, and cooking loss when compared to the control. L and a values increased, and the b value decreased in color as substitution amounts of Korean wheat flour increased. The hardness and adhesiveness of cooking noodles was shown to be a low value at more than a 30% substitution level of Korean wheat flour, and springiness, gumminess, and chewiness all exhibited high values. In a sensory evaluation, overall acceptability was shown to have the highest score in control. More than 30% of substitution of Korean wheat flour showed high preferences. Therefore, 15% of the substitution level of Korean wheat flour could be adapted in dough and cooking properties for making pasta-substituted Korean wheat. However, a texture analyzer and sensory evaluation of cooked pasta was shown to have a good quality at more than 30% substitution level of Korean wheat flour.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.819-830
• /
• 2016

Hydrodynamic characteristics of wave propagation through density stratification have not been identified in details. So this study conducted a numerical simulation using LES-WASS-3D ver. 2.0 for analysis of density current due to water temperature and salinity in order to analyze hydraulic characteristics under wave action in a two-layer density stratified fluid. For the validity and effectiveness of numerical wave tank used, it was compared and analyzed with the experiment to show waveform based on $3^{rd}$-order Stoke wave theory at the internal of a density stratification. Using the results obtained from numerical simulation, the surface and internal wave heights are reduced as the wave propagates in a two-layer density stratified water. And the surface or internal wave attenuation became more serious as the vorticities were increased by the velocity difference of wave propagation due to the upper-lower density difference around the interface of a density stratification. As well, the surface and internal wave attenuations became more serious with higher density difference and depth ratio between upper and lower layers when the wave propagates through a density stratification.

• Membrane Journal
• /
• v.12 no.3
• /
• pp.171-181
• /
• 2002

The parameter which determines the plateau length of current-voltage curve for ion- exchange membranes was studied at various concentrations of NaCl and different flow rates. Moreover, the feasibility of the electrodialytic removal of 0.1 M NaCl solution at various current densities was tested by assessing the electrodialysis performance parameters such as salt removal efficiency, current efficiency, energy consumption and water dissociation. The diffusion boundary layer (DBL) thickness decreased with the NaCl concentration and flow rate of fled solution and it was observed that the plateau length of current-voltage curves was related with the DBL thickness. The removal efficiency and current efficiency were not affected significantly by the current densities even at the overlimiting current region indicating that most current were passed by electrolyte, and water dissociations are not responsible for the overlimiting current. Energy consumption increased when the current density supplied exceeded the limiting current density (LCD) values, because additional energy was necessary to overcome the plateau potential. Beyond the LCD values the energy consumption required to get a certain removal efficiency was not affected by the current density applied. The result suggests that it is allowed to operate electrodialysis processes at as high as possible current density unless water-splitting does not occur.

• Environmental and Resource Economics Review
• /
• v.9 no.1
• /
• pp.93-125
• /
• 1999

본 연구에서는 네트워크 특성을 반영하여 생산성을 분할함에 있어 1인당 소비량 효과, 소비자 밀도 효과, 시스템 규모 효과 등을 추가적인 원인요소로 고려하는 네트워크 산업 생산성 분석 방법론을 제시하고, 이 방법론을 천연가스산업에 적용하여, 한국, 미국, 캐나다, 프랑스, 이태리, 일본의 가스산업 생산성에 대한 국제비교분석을 수행하였다. 실증분석 결과, 미국과 캐나다의 경우, 생산성 증대(productivity growth)의 가장 주요한 요소가 1인당 소비량 증대 효과로 나타났으며, 일본과 프랑스의 경우 기술진보, 그리고 이태리의 경우 주로 소비자 밀도변화를 통해 생산성 증가가 이루어졌음을 알 수 있었다. 한국의 경우에는 시스템 확장과 1인당 소비량 증가가 생산성을 증가시킨 주요 요인으로 나타났다. 또한 생산성 수준 격차의 국제비교 결과, 한국의 생산성 수준은 일본을 제외하고 가장 낮은 수준에 있으며, 이러한 생산성 격차 (productivity difference) 의 주원인은 1인당 소비량 차이에서 발생한 것으로 분석되었다. 따라서 생산성 증대를 위해서는 1인당 소비량 증진을 위한 산업 정책의 추진이 가장 긴요한 것임을 알 수 있었다.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.89-93
• /
• 1994

Effects of density, inner-stress, and grain size on B-H hysteresis loop properties of Mg-ferrite were investigated. As the sintered bulk density increase, coercive force($H_c$) decreasand squareness ratio increase. Coercive force was very dependent on inner-stress in sintered body, so coercive force increase from 1.95[Oe] to 4.35[Oe] when inner stress present in bulk, however, the squareness ratio was almost not changed Coercive force and squareness ratio were independent on grain size of sintered body which is between 6-11[$\mu\textrm{m}$]

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.416-416
• /
• 2011

태양전지의 고효율화를 위해, 생성된 전자와 전공을 전극에서 효과적으로 수집하는 방법에 대한 연구가 많이 진행되고 있다. 태양전지 전면전극은 빛의 조사에 의해 생성된 전자를 수집하는 매체로써 finger width가 넓어질수록, 전자를 수집하기 쉬워진다. 하지만 finger width가 넓어짐에 따라, shadowing loss 증가에 의해 단락전류 밀도가 감소하여 태양전지 효율이 저하 될 수 있다. 본 연구에서는 스크린 프린팅에 의해 형성된 전면전극의 finger width를 기존의 $80{\mu}m$에서 $50{\mu}m$로 변경하고, double printing에 의해 finger height를 높이는 방법으로 태양전지의 효율을 향상 시키고자 하였다. 그 결과, 전극패턴 50에서는 전극패턴 80보다 0.47 단락전류밀도가 증가하였고, 효율(efficiency)은 0.16%가 증가하는 것을 확인할 수 있었다.

• Electrical & Electronic Materials
• /
• v.1 no.3
• /
• pp.269-277
• /
• 1988

P형 Si(100)로 제작한 MOS 커패시터에 $Co^{60}$-.gamma.선을 주사한 후 고주파 C-V특성 곡선으로 부터 방사선 조사에 의해 유발된 산화막안의 트랩전하의 거동 및 Si- $SiO_{2}$계면에서의 트랩밀도 분포의 변화를 검토하였다. 산화막 느랩전하는 .gamma.선 흡수선량 증가와 더불어 증가하다가 $10^{7}$ rad 부근에서부터 서서히 포화하는 경향이 나타났으며 게면트랩밀도의 분포모양은 흡수선량의 증가와 더불어 전형적인 이그러진 W자형에서 넓혀진 V자형 분포로 변화하였으나 최소값은 항상 진성페르미준위( $E_{i}$)부근에 있었으며 그 밀도는 1.0*$10^{11}$~7.5*$10^{11}$[개/$cm^{2}$/eV]로 계산되었다. 또한, 일정 바이어스전압하에서의 조사선량에 따른 $V_{fb}$ 의 변화는 현저하지는 않았으나 바이어스 전압을 +12V로 인가할 때 변화방향의 반전상태가 관측되었다. 그 이유로는 Si측의 계면 부근에서 일어난 눈사태 전자가 산화막내로 주입됨에 따라 도너형 양전하의 수가 감소되기 때문으로 추정되었다.되었다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.3
• /
• pp.190-194
• /
• 2000

Double cropping is important for increase of farm income and rate of arable land utilization. This study was carried out to obtain information for optimum plant density of the second crop in a double cropping system. A waxy corn hybrid, Chalok #2, was sown on July 10 at the first corn cropping site. Growth characteristics and yield response of fresh waxy corn were examined under different planting densities, which were 55.5, 66.6, 83.3, and 111.1 thousands plants ${ha}^{-1}$. Plant height was higher under high planting density than low planting density and 154cm at the 55.5 thousand plants ${ha}^{-1}$, and 168cm at the 111.1 thousand plant ${ha}^{-1}$. It showed same trends in ear height and gravity center height. But planting density did not affect root lodging and silking date. At the silking stage, stalk and leaf dry matter weight and leaf area index (LAI) were increased significantly with increasing planting density, Filled ear lengtg was shortened significantly under the hi임est planting density (111.1 thousand plants ${ha}^{-1}$), while ear length and ear diameter were no differences among planting densities. The number of marketable ears increased with increasing planting density, but husked fresh ear weight was the highest at 83.3 thousand plants ${ha}^{-1}$ with 11.2MT ${ha}^{-1}$and optimum planting density was estimated as about 80 thousand plants ${ha}^{-1}$.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.4
• /
• pp.585-592
• /
• 2009

The objectives of this study were to analyze the physiological and antimicrobial activities of wheat germ. The fatty acid components of the wheat germ included palmitic, stearic, oleic, linoleic, and linolenic acids. Furthermore, the acid value was 8.5, the peroxide value was 7.1, the iodine value was 126.8, the saponification value was 159.7, and the refractive index was 1.547. In the unsaponifiable matter, the total phenol concentration extracted by ethanol, along with physiological activity were 2.02% and 0.45%, respectively, and the amount of flavonoids and activity were 6.89% and 6.90%, respectively. The amount of flavonoids was larger than the phenol concentration in the wheat germ. In addition, the nitritescavenging ability of the wheat germ was lower than ascorbic acid but greater than BHT and tocopherol. The peroxide value in the linoleic acid changed over 5 days, presenting as 0.67, 22.70, 44.25, 5.81, and 91.17 meq/kg, and increases were also consistently shown as time passed for the ethanol extractions and unsaponifiable. Additional data showed that antimicrobial effects could not be detected in the wheat germ concentration or method of extraction.

• Korean Journal of Environment and Ecology
• /
• v.25 no.4
• /
• pp.516-525
• /
• 2011

We studied the influence certain environmental factors (proximity of roosting site, roads, and residential areas) have on the spatial distribution of cranes in the Cheorwon, Korea. Using a range finder and GPS, data were collected from January to February 2007 and were subsequently evaluated with ArcGIS. The size of the cranes' wintering habitat was estimated to be 7$76.9km^2$. Five hundred and fifty-five flocks of cranes were observed and detailed distributions were collected. Feeding distribution of the cranes showed clustered distribution, however, no tendencies of spatial autocorrelation were apparent. Adjacent regions with paved roads and residences showed lower densities than other areas. Distances at which paved roads and residential areas induced changes in feeding flock densities were 1500m and 1750m, respectively. Feeding flock density decreased with increased distance from roosting site. Feeding flock density of the two crane species did not increase as distance from roads increased, however, the density of individuals showed a significant increasing tendency with increased distance from roads. In both species, density of feeding flocks and individuals significantly increased with increasing distance from residential areas. In Red-crowned Cranes, the density of feeding flocks and individuals significantly decreased with increasing distance from roosting site, however, in the case of White-naped Cranes, there was an even distribution in density of feeding flocks and individuals.