• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.215-222
• /
• 2017

In order to evaluate a stress state of concrete according to the change of tensile force of prestressed beam, improved nonlinear resonant ultrasonic spectroscopy(NRUS) method is proposed. This technique is advantageous to evaluate the stress state in initial state because the method shows much higher sensitivity than existing linear ultrasonic methods. The NRUS technique measure a nonlinearity parameter, which is calculated from the resonant frequency shift of ultrasonic wave related to the medium state, and the result is also closely related to the stress state of concrete. In this study, the nonlinearity parameter was measured with the change of tensile force to verify the close relationship between the two factors, and the effect of repetitive load cycle on the change of nonlinearity parameter was analyzed. In addition, sensitivity comparison with the linear ultrasonic pulse velocity method was performed. Through the experimental results, the possibility of NRUS technique for the evaluation of stress state in prestressed beam was confirmed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.368-378
• /
• 2019

Logic trees for probabilistic tsunami hazard assessment include numerous variables to take various uncertainty on earthquake generation into consideration. Results from the hazard assessment vary in different way as more variables are considered in the logic tree. This study is conducted to estimate the effects of various scaling laws and fault parameters on tsunami hazard at the nearshore of Busan. Active fault parameters, such as strike angle, dip angle and asperity, are adjusted in the modelling of tsunami propagation, and the numerical results are used in the sensitivity analysis. The influence of strike angle to tsunami hazard is not as much significant as it is expected, instead, dip angle and asperity show a considerable impact to tsunami hazard assessment. It is shown that the dip angle and the asperity which determine the initial wave form are more important than the strike angle for the assessment of tsunami hazard in the East Sea.

• Korean Journal of Environment and Ecology
• /
• v.38 no.1
• /
• pp.67-78
• /
• 2024

The term ecosystem services refers to natural ecosystems' benefits to humans. Various models have been developed and applied to quantify ecosystem services. Habitat quality assessment is a widely used leading InVEST ecosystem service model. In Korea, habitat quality assessment is conducted for national parks. For habitat quality assessment, the initial value of habitat quality must be used to assess the sensitivity to threats, which varies depending on the country and application field. Therefore, an expert survey (AHP) was conducted based on previous habitat quality assessments in national parks to adjust the sensitivity, the initial value for the habit quality assessment. As a result of the AHP, 18 items were adjusted, including 10 items, such as natural grassland and unarranged fields, upward and 8 items, such as rivers and ponds, downward. Based on the adjusted sensitivity results, the habitat quality of Bukhansan National Park and Gyeryongsan National Park (urban type), Gyeongju National Park (historic type), Hallyeohaesang National Park (ocean type), and Jirisan National Park and Seoraksan National Park (mountain type) were adjusted. The results of the analysis showed that the habitat quality of urban dry areas and water bodies distributed in the national parks was reflected in the habitat quality assessment. In the future, it will be possible to evaluate the habitat quality of natural parks using this standard.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2016.11a
• /
• pp.226-228
• /
• 2016

유출해석을 하기 위한 수문 모형은 크게 분포형 모형과 집중형 모형으로 구분할 수 있다. $Vflo^{TM}$와 같은 분포형 모형은 격자 기반의 유역 특성 및 강우자료로부터 초기 매개변수 값을 추정하기 때문에 모형보정시 민감하게 반응할 수 있다. 따라서 모형 내 구성된 매개변수들의 특성과 민감도를 파악하여 유출해석을 하는 것이 중요하다. 본 연구에서는 물리적 기반의 완전분포 모형인 $Vflo^{TM}$모형을 이용하여 감천유역의 유출해석을 실시하였다. 그 후, 지표면 유출과 하도 추적에서 주요 매개변수가 미치는 영향을 분석하여 매개변수별 민감도를 평가하였다. 이 결과, 수리전도도는 유역전체 유출고에 관여하였고, 불투수율은 첨두유량에 영향을 미치는 것으로 나타났다. 본 연구결과를 통해 유출고 및 유출량에 영향을 미치는 매개변수와 이에 따른 민감도를 확인할 수 있었다.

• Korean Business Review
• /
• v.20 no.1
• /
• pp.105-122
• /
• 2007

This paper identifies the dimensions of political risk on the basis of the classification between risk and uncertainties to implement the precise identification and assessment of the various types of political risk and develop the sound assessment model to accomplish their practical applications. This paper shows the concrete and detailed processes of deriving the assessment models and applying them with the microsoft excel spreadsheet, confirms the result of Butler and Joaquin(1998), and presents the methods of identifying the various combination effects of the political risk impact and the covariance relationship with the market portfolio return through the sensitivity analysis.

• Nuclear Engineering and Technology
• /
• v.14 no.3
• /
• pp.122-137
• /
• 1982

Analyzed is the sensitivity of reactor transient behavior to various reactor parameters during the reactivity induced accidents (RIA) of the Kori Unit 1. Included in the analysis is a partial spectrum of RIAs with relatively fast transients such as uncontrolled rod cluster control assembly bank withdrawl from a subcritical or low power startup condition and rod ejection accidents. The analysis can be performed generally in three steps: calculation of an average core power change, hot spot heat transfer calculation and DNBR (departure from nucleate boiling ratio) calculation. The computer codes used for the analysis are either developed based on the codes relevent to it. These codes are evaluated to be highly reliable. An extensive sensitivity analysis is performed to study the effects of various reactor design and operating parameters on the reactor transient behavior during the accidents. The assumptions and initial conditions used for the RIA analysis in the Kori Unit 1 FSAR (Final Safety Analysis Report) are reexamined, and the corresponding analysis results are reassessed, based on the sensitivity analysis results, to be conservative and reliable.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.1
• /
• pp.141-152
• /
• 2007

Considering uncertainties of random input data, it is more reasonable to use probabilistic method than the conventional deterministic method for the design of structures or for the assessment of the responses of structures, which are designed as safe even under extreme loads. Therefore, to assess the quantitative effects of the constructed cable stayed bridge by the input random variables, a sensitivity analysis is studied. Using perturbation method, an analysis program is developed for the iterative probabilistic finite element analyses and sensitivity analyses of the cable stayed bridge, except the initial shape analysis. Monte-Carlo Simulations were used for the verification of the developed program. The results of sensitivity analysis shows the governing effects of external loads. Because the results also provide the sensitive effects of the stiffness of members and the magnitudes of prestressing force of cables, the developed

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1787-1796
• /
• 2014

The main purpose of this study is to assess the sensitivity of meteorological drought indices in probabilistic perspective using Bayesian Network model. In other words, this study analyzed interrelationships between various drought indices and investigated the order of the incident. In this study, a Bayesian Network model was developed to evaluate meteorological drought characteristics by employing the percent of normal precipitation (PN) and Standardized Precipitation Index (SPI) with various time scales such as 30, 60, and 90 days. The sensitivity analysis was also performed for posterior probability of drought indices with various time scales. As a result, this study found out interdependent relationships among various drought indices and proposed the effective application method of SPI to drought monitoring.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.1
• /
• pp.9-16
• /
• 2005

A series of experiments was conducted to evaluate the effects of temperature on the survival, growth and sensitivity of the benthic amphipods, Mandibuluphoxus mai and Monocnrophium acherusicum, which have been recently developed as new sediment toxicity testing species in Korea. The biological performance for each amphipod species was determined by the survival and growth rates at different water temperatures. The influence of temperature on the sensitivity to reference toxicant, Cd, was determined by the comparison of survival rates of amphipods exposed to control and Cd-spiked seawater at different temperatures. Temperature significantly influenced on the survival, growth and Cd sensitivity of both amphipods. Tolerable ranges of temperature for the >80％ individuals of both M. mai and M. acherusicum with sediment substrates were mostly overlapped (13 to 22℃). The daily growth rates of M. mai and M. acherkisicum increased proportionally with temperature up to 20℃ and 25℃. respectively. Similarly, the sensitivities of M. mai and M. acheyusicum to Cd increased with temperature up to 20℃ and 15℃, respectively. Overall results showed that temperature is a substantially important factor potentially influencing the results of lethal and sublethal bioassays using the amphipods. Therefore, defining the adequate ranges of experimental temperature for the toxicity testing species is the pre-requisite for the development of standardized bioassay protocols.

• KCID journal
• /
• v.16 no.1
• /
• pp.41-45
• /
• 2009