• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.05a
• /
• pp.35-81
• /
• 1998

Distinct Element Method(DEM) has a great advantage to model the discontinuous behaviour of jointed rock masses such as rotation, sliding, and separation of rock blocks. Geometrical data of joints by a field monitoring is not enough to model the jointed rock mass though the results of DE analysis for the jointed rock mass is most sensitive to the distributional properties of joints. Also, it is important to use a properly joint law in evaluating the stability of a jointed rock mass because the joint is considered as the contact between blocks in DEM. In this study, a stochastic modelling technique is developed and the dilatant rock joint is numerically modelled in order to consider th geometrical and mechanical properties of joints in DE analysis. The stochastic modelling technique provides a assemblage of rock blocks by reproducing the joint distribution from insufficient joint data. Numerical Modelling of joint dilatancy in a edge-edge contact of DEM enable to consider not only mechanical properties but also various boundary conditions of joint. Preprocess Procedure for a stochastic DE model is composed of a statistical process of raw data of joints, a joint generation, and a block boundary generation. This stochastic DE model is used to analyze the effect of deviations of geometrical joint parameters on .the behaviour of jointed rock masses. This modelling method may be one tool for the consistency of DE analysis because it keeps the objectivity of the numerical model. In the joint constitutive law with a dilatancy, the normal and shear behaviour of a joint are fully coupled due to dilatation. It is easy to quantify the input Parameters used in the joint law from laboratory tests. The boundary effect on the behaviour of a joint is verified from shear tests under CNL and CNS using the numerical model of a single joint. The numerical model developed is applied to jointed rock masses to evaluate the effect of joint dilation on tunnel stability.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.243-252
• /
• 2006

Influence of the increasing carbon dioxide concentration in seawater on various marine organisms is assessed in this article with regard to the impacts of anthropogenic $CO_2$ introduced into surface or deep oceans. Recent proposals to sequester $CO_2$ in deep oceans arouse the concerns of adverse effects of increased $CO_2$ concentration on deep-sea organisms. Atmospheric introduction of $CO_2$ into the ocean can also acidify the surface water, thereby the population of some sensitive organisms including coral reefs, cocolithophorids and sea urchins will be reduced considerably in near future (e.g. in 2100 unless the increasing trend of $CO_2$ emission is actively regulated). We exposed bioluminescent bacteria and benthic amphipods to varying concentrations of $CO_2$ and also pH for a short period. The ${\sim}l.5$ unit decrease of pH adversely affected test organisms. However, amphipods were not influenced by decreasing pH when HCl was used for the seawater acidification. In this article, we reviewed the biological adverse effects of $CO_2$ on various marine organisms studied so for. Theses results will be useful to predict the potential risks of the increase of $CO_2$ concentrations in seawater due to the increase of atmospheric $CO_2$ emission and/or sequestration of $CO_2$ in deep oceans.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.161-170
• /
• 2020

There is systematic spatial variations in environmental properties due to sensitive reaction to external conditions at plastic greenhouse occupied 99.2% of domestic agricultural facilities. In order to construct 3 dimensional distribution of temperature, relative humidity, CO₂ and illuminance, measurement matrix as 3 by 3 by 5 in direction of width, height and length, respectively, dividing indoor space of greenhouse was designed and tested at experimental site. Linear regression analysis was conducted to evaluate optimal estimation method in terms with horizontal and vertical variations. Even though sole measurement point for temperature and relative humidity could be feasible to assess indoor condition, multiple measurement matrix is inevitably required to improve spatial precision at certain time domain such as period of sunrise and sunset. In case with CO₂, multiple measurement matrix could not successfully improve the spatial predictability during a whole experimental period. In case with illuminance, prediction performance was getting smaller after a time period of sunrise due to systematic interference such as indoor structure. Thus, multiple sensing methodology was proposed in direction of length at higher height than growing bed, which could compensate estimation error in spatial domain. Appropriate measurement matrix could be constructed considering the transition of stability in indoor environmental properties due to external variations. As a result, optimal measurement matrix should be carefully designed considering flexibility of construction relevant with the type of property, indoor structure, the purpose of crop and the period of growth. For an instance, partial cooling and heating system to save a consumption of energy supplement could be successfully accomplished by the deployment of multiple measurement matrix.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.168-176
• /
• 2011

Purpose: This study aims at investigating the influence of various insertion torques on thermal changes of bone. A proper insertion torque is derived based on the thermal analysis with two different implant designs. Materials and methods: For implant materials, bovine scapula bone of 15 - 20 mm thickness was cut into 35 mm by 40 - 50 mm pieces. Of these, the pieces having 2 - 3 mm thickness cortical bone were used as samples. Then, the half of the sample was immersed in a bath of $36.5^{\circ}C$ and the other half was exposed to ambient temperature of $25^{\circ}C$, so that the inner and surface temperatures reached $36.5^{\circ}C$ and $28^{\circ}C$, respectively. Two types of implants ($4.5{\times}10\;mm$ Br${\aa}$nemark type, $4.8{\times}10\;mm$ Microthread type) were inserted into bovine scapula bone and the temperature was measured by a thermocouple at 0.2 mm from the measuring point. Finite element method (FEM) was used to analyze the thermal changes at contacting surface assuming that the sample is a cube of $4\;cm{\times}4\;cm{\times}2\;cm$ and a layer up to 2 mm from the top is cortical bone and below is a cancellous bone. Boundary conditions were set on the basis of the shape of cavity after implants. SolidWorks was used as a CAD program with the help of Abaqus 6.9-1. Results: In the in-vitro experiment, the Microhead type implant gives a higher maximum temperature than that of the Br${\aa}$nemark type, which is attributed to high frictional heat that is associated with the implant shape. In both types, an Eriksson threshold was observed at torques of 50 Ncm (Br${\aa}$nemark) and 35 Ncm (Microthread type), respectively. Based on these findings, the Microthread type implant is more affected by insertion torques. Conclusion: This study demonstrate that a proper choice of insertion torque is important when using a specific type of implant. In particular, for the Microthread type implant, possible bone damage may be expected as a result of frictional heat, which compensates for initial high success rate of fixation. Therefore, the insertion torque should be adjusted for each implant design. Furthermore, the operation skills should be carefully chosen for each implant type and insertion torque.

• Journal of Ecology and Environment
• /
• v.29 no.6
• /
• pp.551-558
• /
• 2006

Effects of Pb and $CO_2$ on soil microbial community associated with Pinus densiflora were investigated using community level physiological profiles (CLPP) and 16S rDNA PCR-denaturing gradient gel electrophoresis (DGGE) methods. Two-years pine trees were planted in Pb-contaminated soils and uncontaminated soils, and cultivated for 3 months in the growth chamber where $CO_2$ concentration was controlled at 380 or 760 ppmv. The structure of microbial community was analyzed in 6 kinds of soil samples (CA-0M : $CO_2$ 380 ppmv + Pb 0 mg/kg + initial, CB-0M : $CO_2$ 380 ppmv + Pb 500 mg/kg + initial, CA-3M : $CO_2$ 380 ppmv + Pb 0 mg/kg + after 3 months, CB-3M : $CO_2$ 380 ppmv + Pb 500 mglkg + after 3 months, EA-3M : $CO_2$ 760 ppmv + Pb 0 mg/kg + after 3 months, EB-3M : $CO_2$ 760 ppmv + Pb 500 mg/kg + after 3 months). After 3 months, the substrate utilization in the uncontaminated soil samples (CA-3M vs EA-3M) was not significantly influenced by $CO_2$ concentrations. However, the substrate utilization in the Pb-contaminated soil samples (CB-3M vs EB-3M) was enhanced by the elevated $CO_2$ concentrations. The results of principal component analysis based on substrate utilization activities showed that the structure of microbial community structure in each soil sample was grouped by Pb-contamination. The similarities of DGGE fingerprints were 56.3 % between the uncontaminated soil samples (CA-3M vs EA-3M), and 71.4% between the Pb-contaminated soil samples (CB-3M vs. EB-3M). The similarities between the soil samples under $CO_2$ 380 ppmv (CA-3M vs CB-3M) and $CO_2$, 760 ppmv (EA-3M vs EB-3M) were 53.3% and 35.8%, respectively. These results suggested that the structure of microbial community associated with Pinus densiflora were sensitively specialized by Pb-contamination rather than $CO_2$ concentration.

• Journal of Korean Society of Forest Science
• /
• v.98 no.1
• /
• pp.55-65
• /
• 2009

Annex I parties continued its consideration of how to address, the definitions, modalities, rules and guidelines for the treatment of Land Use, Land-use Change and Forestry (LULUCF) in the second commitment period of the Kyoto Protocol by the year of 2009. In the AWG-KP conference held in Accra, Ghana in 2008, four alternatives (gross-net carbon accounting, net-net with base year or base period accounting, net-net with forward looking baseline accounting, and land-based accounting method) for negotiations were decided in order to revise gross-net accounting method applied during the first commitment period of the Kyoto Protocol. In this study, alternative scenarios are set in consideration with reporting system (voluntary or compulsory), discount factors and cap about these three alternatives except for the method of net-net with forward looking baseline accounting, and then estimates the Removal Unit (RMU) among the countries. In the case that article 3.4 activities under the Kyoto Protocol revises from voluntary reporting to mandatory reporting, it is estimated that the loss of RMU would be huge in Russia, Australia, New Zealand, as well as Canada potentially. Net-net with base year or base period carbon accounting and land-based carbon accounting method have big difference of RMU in accordance with the base year or the base period. So the more unfavorable the country with a lot of old-age forests was, the closer the base year or period comes to the commitment period in the context of RMU. If it is getting lowered for the current rate of 85% in discount factors, RMU is getting higher to the whole countries. Therefore in Korea with little potential for afforestation and reforestation, there was the most sensitive response to the change of discount factors. Post-2012 LULUCF hereafter, it is strongly expected for the succession of current carbon accounting system which is voluntary reporting of gross-net carbon accounting and the activity for article 3.4. Other carbon accounting method is hard to accept in aspect that there is big differentiated interests among the countries and it is required enormous cost and time to develop reliable method. Provide for Post-2012 mandatory greenhouse gas reduction, Korea needs to have a competitive negotiation strategies differentiated from Annex I countries. The most reliable alternative would be to lower the discounting factors about the activities for forest management.

• Sleep Medicine and Psychophysiology
• /
• v.5 no.1
• /
• pp.71-79
• /
• 1998

Objectives : This study was to evaluate sleep patterns and daytime sleepiness resulting from rotating shiftwork. The authors, also, tried to find out the relationship between the severity of daytime sleepiness and personality factors. Methods : The subjects consisted of 41 female rotating shiftwork nurses and the control group consisted of 39 female day timeworkers. All of them completed the Sleep questionnaire of Korea University Sleep Disorder Clinic, the Epworth Sleepiness Scale(ESS), the 16 Personality Factors(16PF), the Beck Depression Inventory(BDI) and the State Trait Anxiety Inventory(STAI). Multiple regression analysis of 16PF of the rotating shiftwork nurses was done to find out possible predictors of the severity of daytime sleepiness. Results : The mean duration of deprived sleep due to rotating shiftwork was $64.26\;{\pm}\;14.54\;min$. The frequency of sleep difficulty($1.24\;{\pm}\;1.17\;day/week$ vs $0.67\;{\pm}\;1.31\;day/week$, p < 0.05), time needed to fall asleep($103.05\;{\pm}\;73.48\;min$. vs $70.00\;{\pm}\;60.08\;min$, p < 0.05), sleep duration when having some difficulties in sleep ($204.25\;{\pm}\;79.90\;min$. vs $280.44\;{\pm}\;111.59\;min$., p < 0.001), recent changes in energy($x^2\;=\;4.16$, p < 0.05), worrying about sleep($x^2\;=\;11.08$, p < 0.05), and taking naps($x^2\;=\;4.98$, p < 0.05) showed significant differences between rotating shiftworkers and normal controls. The ESS socre of shiftworkers ($8.68\;{\pm}\;3.04$) was greater than that of normal controls ($6.86\;{\pm}\;3.04$)(p < 0.01). Personality factors such as C factor($R^2\;=0.283$), I factor($R^2\;=0.358$) and G factor($R^2\;=0.470$) were related with the severity of the daytime sleepiness(p < 0.001). Conclusions : The rotating shiftwork nurses had more difficulties in sleep such as having difficulties in falling asleep and in maintaining sleep, and showed lowered energy, decreased senses of well-being and so on. The rotating shiftwork nurses experienced more severe daytime sleepiness than controls did. Personality factors, such as C factor, I factor, and G factor of 16PF were suggested to be useful for predicting the severity of daytime sleepiness resulting from rotating shiftwork.

• Broadcasting and Media Magazine
• /
• v.11 no.4
• /
• pp.104-117
• /
• 2006

In this Paper, we analyze the application of Interactive Data Broadcasting in DMB(Digital Multimedia Broadcasting) in the accordance with convergence of service and technology. With the acceleration of digital convergence in the Ubiquitous period substantial development of digital media technology and convergence of broadcasting and telecommunication industry are being witnessed. Consequently these results gave rise to newly combined-products such as DMB(Digital Multimedia Broadcasting), WCDMA(Wide-band code division multiple access), Wibro(Wireless Broadband Internet), IP-TV (Internet protocol TV) and HSDPA(High speed downlink packet access). The preparatory stage for the implementation of Interactive Data Broadcasting Service will be reached by the end of December, 2006. DMB is the first result of a successful convergence service between Broadcasting and Telecommunication in new media era. Multimedia technology and services are the core elements of DMB. The Data Broadcasting will not only offer various services of interactive information such News, Weather, Broadcasting Program etc, but also be linked with characteristic function of mobile phone such as calling and SMS(Short Message Service) via Return Channel.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.4
• /
• pp.86-99
• /
• 2016

This study was for analyzing the external environment and internal space structure and improving the way of use efficiency in waterfront through the Dragon boat festival to utilize waterfront actively. Through from the four target area, Hongkong, Busan, Incheon and Daejeon, this study was for an importance and satisfaction analysis for users about the element effect on the waterfront use efficiency and the contribution to cultural contents revitalization of waterfront by giving basic data. The result is as follows. First, in the importance analysis about 12 items, modern cultural infra around the waterfront was ranked highest, 8.26 and waterfront landscape, square & openspaces, convenience facilities, transport, green area, quality of viewing space, historic resources, pedestrian, suitability of width, wave, depth, water quality, berth & mooring were ranked in descending order. Second, waterfront landscape was interpreted by rather the external environmental impact according to city size than the matter of spatial structure in target area and judged as an important factor effect on site selection for waterfront. In the analysis of waterfront landscape, the reason of the high satisfaction about domestic target area was that riverside parks were recently made considering their waterfront activities. Viewing space was major infra where people could experience the pleasant waterfront and watch dynamic water leisure sports like Dragon boat three dimensionally and was thought to be improved for the use efficiency. Third, tourism resources were very important element that affect the use efficiency of waterfront, so waterfront users react sensitively to modern tourism resources rather than to historic resources. This meant that tourism infrastructure for shopping and leisure of the young affected the use efficiency of waterfront, so Hongkong and Busan were in a better position in terms of using waterfront that was near the tourism infrastructure. Fourth, in the analysis of traffic accessibility, both Hongkong and Busan were high evaluated in terms of excellent traffic accessibility by subway. Daejeon was low rated in terms of the satisfaction of use efficiency, because of the relative lower place awareness compared with transportation infrastructure. In Hongkong, waterfront was connected with downtown and in Busan, housing complex and shopping centers were located in the place for users in an easily accessible on foot, so the satisfaction was high-pitched. Finally, in the importance of water surface width and the analysis of satisfaction, except Incheon, all the three were over 200m in width of water surface and this meant the surface width above certain level was interpreted to interrupt the concentration of enjoying the water leisure sports. In the analysis of surface condition such as water quality, water depth and wave, through a survey, Busan had a problem with water quality and Gapcheon in Daejeon had a problem with optimal water depth by the festival participants.

• Journal of the Korean Institute of Gas
• /
• v.8 no.2 s.23
• /
• pp.15-27
• /
• 2004

The purpose of this paper is to improve the performance of Polymer electrolyte fuel cell(PEMFC) by studying the channel dimension of bipolar plates using commercial CFD program 'Fluent'. Simulations are done ranging from 0.5 to 3.0mm for different size in order to find the channel size which shoves the highst hydrogen consumption. The results showed that the smaller channel width, land width, channel depth, the higher hydrogen consumption in anode. When channel width is increased, the pressure drop in channel is decreased because total channel length Is decreased, and when land width is increased, the net hydrogen consumption is decreased because hydrogen is diffused under the land width. It is also found that the influence of hydrogen consumption is larger at different channel width than it at different land width. The change of hydrogen consumption with different channel depth isn't as large as it with different channel width, but channel depth has to be small as can as it does because it has influence on the volume of bipolar plates. however the hydrogen utilization among the channel sizes more than 1.0mm which can be machined in reality is the most at channel width 1.0, land width 1.0, channel depth 0.5mm and considered as optimum channel size. The fuel cell combined with 2cm${\times}$2cm diagonal or serpentine type flow field and MEA(Membrane Electrode Assembly) is tested using 100W PEMFC test station to confirm that the channel size studied in simulation. The results showed that diagonal and serpentine flow field have similarly high OCV and current density of diagonal (low field is higher($2-40mA/m^2$) than that of serpentine flow field under 0.6 voltage, but the current density of serpentine type has higher performance($5-10mA/m^2$) than that of diagonal flow field under 0.7-0.8 voltage.