• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.29-36
• /
• 2013

This study is the fundamental research to establish evacuation planning and to analyze evacuation planning characteristics in Gumi-city based on existing network and traffic characteristics data. Assuming an emergency situation, it compared with evacuation time estimates between using existing traffic signal system and proposed lane-based routing method through micro simulations. As a result, using existing traffic signal system could not affect the evacuation times in each level of emergency conditions. However this study found that proposed lane-based routing method is very effective to reduce an evacuation time compared with using existing traffic signal system. Also the proposed method is verified to reduce an evacuation time especially in extreme emergency circumstances.

• Journal of Korean Society of Transportation
• /
• v.34 no.6
• /
• pp.548-559
• /
• 2016

Recent interests in both vehicle emissions and public health have facilitated the development of more eco-friendly transportation systems. This study proposed an integrated simulation approach for evaluating the effectiveness of speed management strategies from the various perspectives including safety, operational efficiency, and environmental compatability. Those simulation methods include driving simulation, traffic flow simulation, emissions simulation, and air dispersion simulation. An essence of the proposed simulation framework is to create the systematic connection of each simulation method toward the evaluation of effectiveness of speed management strategies. As an example, chicane and speed hump in residential area were evaluated by the proposed method. It is expected that the proposed simulation-based approach would be effectively used for the decision-making process in selecting better alternatives considering both safety and public health.

• Journal of Korean Society of Transportation
• /
• v.23 no.1
• /
• pp.67-80
• /
• 2005

In this paper, the primary objective of the research are to review the methods currently avaliable for estimating the delay incurred by vehicles at signalized intersections. The paper compares the delay estimates from a deterministic queueing model, a model based on shock wave theory , the steady-state Webster model, the queue-based models defined in the 1994 and 2001 version of the High way Capacity Manual, in addition to the delays estimated from the TRANSYT-7F macroscopic simulation and NETSIM microscopic simulation. More especially, this paper is to compare the delay estimates obtained using macroscopic and microscopic simulation tools against state-of-the practice analytical models that are derived from deterministic queueing and shock wave analysis theory. The results of the comparisons indicate that all delay models produce relatively similar results for signalized intersections with low traffic demand, but that increasing differences occur as the traffic demand approaches saturation. In particular, when the TRANSYT-7F and NETSIM are compared, it is highly differences as approach for traffic condition to over-saturation. Also, the NETSIM microscopic simulation is the lowest estimates among the various models.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.231-238
• /
• 2023

Since there is a limit to the physically visible horizon that sensors for autonomous driving can perceive, complementary utilization of digital map data such as a Local Dynamic Map (LDM) along the probable route of an Autonomous Vehicle (AV) is proposed for safe and efficient driving. Although the amount of digital map data may be insignificant compared to the amount of information collected from the sensors of an AV, efficient management of map data is inevitable for the efficient information processing of AVs. The objective of this study is to analyze the efficiency of information use and information processing time of AV according to the expansion of the active section of LDM-based static road and traffic information. To carry out this objective, a microscopic simulator model, VISSIM and VISSIM COM, was employed, and an area of about 9 km × 13 km was selected in the Busan Metropolitan Area, which includes heterogeneous traffic flows (i.e., uninterrupted and interrupted flows) as well as various road geometries. In addition, the LDM information used in AVs refers to the real high-definition map (HDM) built on the basis of ISO 22726-1. As a result of the analysis, as the electronic horizon area increases, while short links are intensively recognized on interrupted urban roads and the sum of link lengths increases as well, the number of recognized links is relatively small on uninterrupted traffic road but the sum of link lengths is large due to a small number of long links. Therefore, this study showed that an efficient range of electronic horizon for HDM data collection, processing, and management are set as 600 m on interrupted urban roads considering the 12 links corresponding to three downstream intersections and 700 m on uninterrupted traffic road associated with the 10 km sum of link lengths, respectively.

• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.19-29
• /
• 2003

The purpose of this study is to analyse the effect of the parking information on the waiting time using the simulation method. Stated Preference survey has been implemented to construct the parking lot choice model. A queue simulation is carried out to investigate the effect of various parking information on the waiting time. The results show that providing parking information is likely to increase the utilization of parking place and to decease the waiting time of individual vehicle. Furthermore, as the parking demand increases, the detailed and quantitative parking information such as "5 minutes delay" is more effective than qualitative parking information such as "available".

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.75-82
• /
• 2007

This study was performed to investigate impacts of truck lane restrictions on multilane highways on traffic flow variables such as average speed, the frequency of lane changes, and change in traffic volume and also to verify whether or not different lane restriction scenarios were proper. Two types of hypothetical highway networks and OD demands were developed for traffic simulation models in order to conduct the experimental study. Three types of scenarios were also developed according to the number of restricted lanes for trucks. The PARAMICS microscopic traffic simulation software package was used as the primary analytical tool. Statistical analysis was conducted with simulation outputs. Results showed that truck lane restrictions may lead to positive impacts on traffic flow on multilane highways. In addition, this study demonstrated that the number of restricted lanes can be very an important factor to lead successful implementation of truck lane restrictions.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.145-153
• /
• 2009

Although an interest in higher design speeds continues to increase to promote more efficient travel on expressways, the current Korean design guidelines do not provide criteria for design values. An arising issue associated with higher design speeds is how to effectively ensure traffic safety under such high speed traffic conditions. In particular the safety issue would become more significant in determining the interchange spacing. This study proposes a methodology for determining freeway interchange spacing under higher speed traffic conditions. A microscopic traffic simulator, VISSIM, was used to evaluate the effects of various interchange spacings on traffic conditions in terms of safety. In this study, the acceleration noise was used as an index to represent the stability of traffic conditions, which is a potential indicator to quantify the level of safety. It was found based on simulation evaluations that 5-km interchange spacing would be a feasible alternative under higher speed traffic conditions (around 160 km/h).

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.105-116
• /
• 2007

A ROUNDABOUT is more effective way to improve safety and prevent delays than signal intersection. ROUNDABOUT has been known highly safe treatment that could be used as a method to reduce conflicts between vehicles, to reduce travel speed in inner or approach of intersection, and to have no speed difference between drivers than intersection. In this study, the effective analysis on the installation of ROUNDABOUT was carried out using computer-based simulation tool VISSIM, in order to evaluate performance and safety of ROUNDABOUT and develope a warrant. In conclusion, the results indicated that there was remarkable increase of Y-intersection capacity and decrese of delay, and improvement of traffic safety. Finally, A nice feature of this study is to firstly attempt to use microscopic simulator to evaluate the effectiveness of ROUNDABOUT and suggest a passible operation boundary.

• KDI Journal of Economic Policy
• /
• v.11 no.3
• /
• pp.131-146
• /
• 1989

본고(本稿)에서는 가계(家計)의 저축행태(貯蓄行態)가 일생적기(一生適期)(life cycle)에 걸쳐 연령(年齡)-자산관계(資産關係)(age-wealth profile)를 통해 어떻게 나타나는가를 이론적으로 그리고 미시적(微視的) 시뮬레이션의 결과로 살펴보았다. 본고(本稿)에서는 기존의 Ando-Modigliani의 모형(模型)에 성인상당수(成人相當數)라는 개념(槪念)을 도입(導入), 무자녀가구(無子女家口)와 유자녀가구(有子女家口) 사이에 자산저축경로(資産著畜經路)의 차이가 존재함을 밝혔다. 즉, 유자녀가구(有子女家口)의 경우, 자녀의 교육비를 지원함으로써-좀 더 정확히 표현하면 또다른 형태의 세대간교부(世代間交付)(intergenerational transfer)라고 할 수 있는 자녀의 인적자산형성(人的資産形成)에 투자함으로써-소비(消費)가 이 시기에 급상승하게 되고 따라서 자산저축(資産著畜)이 무자녀가구(無子女家口)의 경우보다 완만해질 수 있음을 밝혔다.

• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.63-66
• /
• 1996

An micro model for the power insulated Gate Bipolar Transistor(IGBT) is developed. The model consistently described the IGBT steady-state current-voltage characteristics and switching transient current and voltage waveform for all loading conditions. The model is based on the equivalent circuit of a MOSFET with supplies the base current to a low-gain, high-level injection, bipolar transistor with its base virtual contact at the collector and of the base. Model results are compared with measured turn-on and turn-off waveform for different drive, load, and feedback circuits.