• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.433-442
• /
• 1989

본 연구에서는 볼 엔드 밀 절삭실험을 통하지 않고 일반적인 선삭가공 등에서 쉽게 구할 수 있는 2차원 절삭 데이터를 이용하여 볼 엔드 밀의 기하학적 형상 및 절삭조건이 주어졌을 때 모든 볼 엔드 밀 가공에서의 절삭기구를 해석하고 절삭력 모델을 구하고자 한다. 이를 위하여 볼 엔드 밀의 기하학적 특성 및 절삭 조건 등을 분석하고, 미소절삭날터를 이용한 3차원 절삭해석방법을 적용하여 미소 절삭력을 구하고 이들의 합력으로서 절삭력을 계산한다.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.72-80
• /
• 1995

Ultraprecision machining technology has been playing a rapidly increasing and important role in manufacturing. However, the physics of the micromachining process at very small depth of cut, which is typically 1 .mu. m or less is not well understool. Shear along the shear plane and friction at the rake face dominate in conventional machining range. But sliding along the flank face of the tool due to the elastic recovery of the workpiece material and the effects of plowing due to the large effective negative rake angle resultant from the tool edge radius may become important in micromachining range. This paper suggests an orthogonal cutting model considering the cutting edge radius and then quantifies the effect of plowing due to the large effective negative rake angle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1042-1047
• /
• 2001

A mechanistic model is developed to predict the thrust force and cutting torque of drilling process including wear. A mechanistic oblique cutting force model is used to develop the drilling force model. The cutting lips are divided into small elements and elemental forces are calculated by multiplying the specific cutting pressure with the elemental chip area. The specific cutting pressure is a function of chip thickness, cutting velocity, rake angle and wear. The total forces are then computed by summing the elemental forces. Measured cutting forces are in good agreement with the simulated cutting forces.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.125-129
• /
• 1996

In this study, a method is proposed for the cutting force prediction of Ball-end milling process using Z-map is proposed. Any types of cutting area generated from previous cutting process can be expressed in z-map data. Cutting edge of a ball-end mill is divided into a set of finite cutting edges and the position of this edge is projected to the cross-section plane normal to the Z-axis. Comparing this projected position with Z-map data of cutting area and determining whether it is in the cutting region, total cutting force can be calculated by means of numerical integration. A series of experiments such as side cutting and upward/downard cutting was performet to verify the simulated cutting force.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.173-178
• /
• 2003

Recently, according to the development of mechatronics industry that was composed of NT, ST, IT, RT and etc, the 1 necessity of nano-parts was increased. Because of the necessity, this research was started for improving work precision of the parts as fixing UPCU( Ultra Precision Cutting Unit)on lathe. So, in this research we executed the modeling of UPCU (Ultra Precision Cutting Unit) by the application of PZT, the relationship between the displacement of tool in UPCU and the cutting force of it has been in take a triangular position in the case of plane cutting. The modeling of system that is containing the fine displacement was performed. Also, we found like to find the optimal cutting condition through the simulation of relationship between the displacement and the cutting force.

• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.52-57
• /
• 2003

In this paper, stability of ultra precision cutting unit is analyzed and this unit is the kernel unit in ultra precision processing machine. According to alteration of shape and material about hinge, stability investigation is performed Through this stability investigation, trial and error is reduced in design and manufacture, at the same time, we are accumulated foundation data for unit control.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2003년도 추계 학술논문발표회 논문집
• /
• pp.270-279
• /
• 2003

현대산업의 고도화 추세에 따라 반도체를 비롯한 의료 및 식품위생기기 산업분야에 사용되는 부품의 고정도가 요구되면서 기존에 공구와 가공물이 직접 접촉하면서 절삭하는 가공방법으로는 절삭력에 의한 변형과 마찰열 등으로 인하여 고정도 가공의 실현에 어려움이 생기게 되었다. 그리고 의료 및 식품기기에 사용될 부품의 내면을 기존의 기계적 가공방법으로 가공할 경우 공작물 표면에 미소한 가공흔적이 남게되어 표면의 요철부분에 칩(chip)등의 불순물이 잔재할 우려가 있으며, 또한 요철 부분에 미생물이 번식할 경우 청정도가 떨어져 산업위생상의 문제점이 발생하게된다.(중략)

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.44-52
• /
• 2003

This research suggests a cutting force model for the ball end milling processes. This model includes the effect of tool run out and tool deflection. In the proposed model, the flutes of ball end mills are considered as series of infinitesimal elements and each cutting edge is assumed to be straight for the analysis of the oblique cutting process, in which the small cutting edge element has been analyzed as an orthogonal cutting process n the plane including the cutting velocity and the chip-flow vector. Therefor, the cutting forces can be calculated through the model using the orthogonal cutting data obtained from the orthogonal cutting test. In order to enhance the performance of the model, the flutes of ball end mill are defined to keep geometric consistency at the peak of the ball part and the junction with the end mill part. The divided infinitesimal cutting edges are regulated to be even lengths. Some experiments show the validity of the developed model in the various cutting coalitions.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.65-71
• /
• 1998

This paper presents in-process compensation methodology to eliminate cutter runout and improve machined surface quality. The cutter runout compensation system consists of the micro-positioning mechanism with the PZT (piezo-electric translator) which is embeded in the sliding table to manipulate the radial depth of cut in real time. For the implementation of cutter runout compensation methodology. cutting force adaptive control was proposed in the angle domain based upon PI (proportional-integral) control strategy to eliminate chip-load change in end milling process. Micro-positioning control due to adaptive acuation force response improves the machined surface quality by compensation or elimination of cutter runout induced cutting force variation. This results will provide lots of information to build-up the precision machining technology.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.137-143
• /
• 2002

This paper presents the In-process compensation to control cutter runout and improve the machined surface quality. Cutter runout compensation system consists of the micro-positioning servo system with piezoelectric actuator which is embeded in the sliding table to manipulate radial depth of cut in real-time. Cutting force feedback control was proposed in the angle domain based upon repetitive learning control strategy to eliminate chip load variation in end milling process. Micro-positioning control due to adaptive actuation force response improves the machined surface quality by compensation runout effect induced cutting force variation. This result will provide lots of information to build-up the preciswion machining technology.