• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.242-246
• /
• 2002

인체의 손가락 끝에서 발생하는 맥의 파형과 온도, 피부저항을 측정할 수 있는 복합센서를 설계 제작하였다. 인체신호를 계측하는 여러 가지 방법 중에서 손가락 끝의 맥 파형을 계측하고자 광센서를 활용하여 계측시스템을 구현하였고 특성을 평가하였다. 그 결과 체온측정은 대략 $0.01^{\circ}C$의 분해능을 구현 할 수 있었고, 피부저항 측정은 최대 $5M{\Omega}$까지 측정 가능하고 최소분동은 $5k{\Omega}$ 정도이며, 맥박측정은 새롭게 포토센서를 적용하여 미소진동을 측정할 수 있었다.

• Korean Journal of Materials Research
• /
• v.7 no.12
• /
• pp.1077-1082
• /
• 1997

TiN은 기상반응법으로 티타늄판과 질소가스의 질화반응에 의해 제조되었다. $\delta$-TiN은 약 1100-140$0^{\circ}C$의 온도 범위에서만 형성되는데 반해, 110$0^{\circ}C$이하의 온도에서는 $\varepsilon$-TiN 상도 관찰할 수 있었다. $\delta$-TiN의 미소정도값은 3000$\pm$300kg/m$m^2$였고, 격자상수는 0.4226$\mu\textrm{m}$였다. 가스의 유동속도가 0.7$\ell$/min의 속도이하에서는 확산과정에 의해 지배됨을 알 수 있었다. 활성화에너지가 110$0^{\circ}C$이상에서는 67.6Kcal/mol이었고 110$0^{\circ}C$이상에서는 13.9Kcal/mol이었던 것으로 보아 반응메커니즘이 110$0^{\circ}C$를 기점으로 변한다는 것을 명백히 관찰할 수 있었다. 그리고 증착속도가 확산과정에 의해 지배되는 영역에서 TiN의 증착속도는 전체 유량의 제곱근에 비례하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.373-379
• /
• 1996

모든 물체는 물체를 구성하는 재료의 성질과 구조의 형식에 따라 각각의 고유주기를 갖고 있으며, 구조물을 구성하는 재료는 시간의 경과와 더불어 경년열화 과정을 거치므로 구조물의 고유주기는 조금씩 길어지는 경향을 갖는다. 그러므로 구조물의 건설 당시에 동적특성을 파악해 놓았다면 구조물에 문제가 발생했을 시의 동적특성을 측정하여 구조물의 손상 여부를 판단하는 중요한 열쇠가 된다. 본 연구는 자연적으로 발생하는 진동 또는 인간이 사회생활을 영위하면서 항상 발생하고 있는 지반의 미소한 외력인 상시미동을 이용하여 구조물의 동적특성을 측정하고 구조해석을 통한 해석결과와 비교 분석하여 구조물의 진동특성을 파악하는 편리한 도구로써 상시미동이라는 진동측정방법의 실용성을 확인하였으며, 고유진동수의 변화추이는 구조물의 건전성을 평가하는 새로운 지표가 될 수 있음을 제안하였다.

• Journal of the KSME
• /
• v.28 no.4
• /
• pp.322-327
• /
• 1988

용접구조물의 파괴는 단순 역학적인 차원을 넘어서 재료공학적 검토와 시공상의 각종 변수를 고려해야만 정확하게 이해할 수가 있으며 방지할 수 있다. 용접도중에 발생되는 미소파괴(균열) 는 적절한 재료의 선정과 적당한 시공법으로 해결할 수 있으며, 사용도중 발생되는 거시적 파 괴는 사용조건에 유의하고 발생된 용접결함을 제거할 수 있다면 방지할 수 있다. 결론적으로 용접구조물의 파괴는 용접도중에 결함을 발생시키지 않는 방법으로 방지하는 것이 가장 효과적 이기 때문에 시공법의 선정 및 실시는 충분한 검토와 주의가 필요하다. 용접품의 파괴현상을 해석하는 데는 현재까지 잘 연구되어진 각종 파괴역학적 및 피로역학적 해석이 적용될 수 있 으나 용접부의 불균일한 조직형성에 따른 기계적 성질의 불균일성과 잔류응력 등을 추가로 고 려해야 하는 것이 약간 다를 뿐이다. 현재 용접부의 취성 및 피로파괴에 대한 다방면의 연구가 활발하게 이루어지고 있는 형편이며 향후에는 용접구조물의 수명예측을 포함한 가족 파괴해석 기술이 확립될 것으로 생각된다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.729-737
• /
• 2004

In this paper, a DNA chip with a microelectrode array was fabricated using microfabrication technology. Several probe DNAs consisting of mercaptohexyl moiety at their 5 end were immobilized on the gold electrodes by DNA arrayer. Then target DNAs were hybridized and reacted with Hoechst 33258, which is a DNA minor groove binder and electrochemically active dye. Linear sweep voltammetry or cyclic voltammetry showed a difference between target DNA and control DNA in the anodic peak current values. It was derived from Hoechst 33258 concentrated at the electrode surface through association with formed hybrid. It suggested that this DNA chip could recognize the sequence specific genes.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.6 s.171
• /
• pp.199-206
• /
• 2005

In this work, a theoretical investigation on the energy harvesting is undertaken using one of potential smart materials; piezoelectric material. The energy equations fur both square and circular types of the piezoelectric material are derived, and the energy generated from two commercially available Products: $PZT (Lead/Zirconium/Titanium: Pb(Zr,\;Ti)O_3)$ and PVDF (polyvinylidene fluoride) are investigated in terms of the thickness and area. In addition, a finite element analysis (FEA) is undertaken to obtain the generated energy due to the uniform pressure applied on the surface of the piezoelectric materials. A comparative work between the theory and the FEA is made followed by the brief discussion on the usage of the harvested energy for Bio MEMS.

• Journal of the Korean Society for Railway
• /
• v.17 no.1
• /
• pp.43-51
• /
• 2014

In the earth structures of railways, large coarse granular materials are widely used as fill materials. However, experimental studies that consider the dynamic properties of these coarse granular materials have rarely been carried out in Korea due to the lack of a large scale test apparatus in this country. In this study, large scale cyclic triaxial tests were carried out for materials such as reinforced roadbed (subballast, graded crushed stone), transition zone gravel, and the upper subgrade of a railway. These specimens were prepared according to certain conditions (dry unit weight, grain size distribution, and so on) specified in the Korea railroad design standard. Based on these large triaxial test results, normalized shear modulus and damping ratio curves according to small strain level are suggested. A model and coefficients for each material are also proposed.

• Composites Research
• /
• v.16 no.6
• /
• pp.33-40
• /
• 2003

The initial thermal degradation of polymer matrix composite is not observed easily. At the beginning of thermal degradation of polymer matrix composites, phase transformation such as chain scission, oxidation occur, and then micro delamination is produced in matrix and interface between matrix and fiber before blistering. Initial heat damage deteriorate mechanical properties of composites. We presented the detection method of the initial heat damage of composites conveniently using ultrasonic technique. Absorption coefficient and material velocity was measured with thermal degradation and degree of cure. The more thermal degradation was progressed, the more absorption coefficient was increased. When the cure temperature is more high, the absorption coefficient of cured composite is increased and material velocity is decreased. We concluded that cure temperature is more high, the defects such as void is increased and molecular structure cured at high temperature has cross-linking structure which is more absorb the ultrasonic waves.

• Composites Research
• /
• v.16 no.4
• /
• pp.29-35
• /
• 2003

In this paper. various tow parameters such as equivalent tow thickness, amplitude of longitudinal tow and tow intervals were investigated and compared with each other by using microscopic observation to find out the exact deformation patterns between both directions of the fabric structure(Longitudinal and Transverse Directions). And those observation results were compared with bias extension. biaxial tests results with dry fabric which has the same tow structure as the draped helmet materials and also compared with prepreg specimen which is cured by autoclave moulding without vacuum and pressure condition. Specimens for the observation were taken from draped helmet which is made of fabric composite(Five Harness Satin Weave). From the observation results, it was found that there are different deformation pattern between tow directions and effect of geometric condition on the deformation of the fabric materials during draping process was verified.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5C
• /
• pp.211-220
• /
• 2012

Coarse granular materials such as gravel, rubble is used as major fill materials in earth structures of railway, road and dam. Therefore, it is essential to accurately evaluate properties of these materials for reasonable design and construction. In the precedent study, we built large triaxial testing system and verified system compliance with a focus on the dynamic properties. And we could secured the reliability of the system. In this study, the cyclic triaxial tests were performed in various experimental conditions on coarse granular material. Two series of parallel graded samples are prepared by mixing crushed rock. The influence of grain size, loading pattern, loading frequency, and fine contents were analyzed and discussed.