• Resources Recycling
• /
• v.30 no.2
• /
• pp.61-67
• /
• 2021

Scraps are a byproduct of the machining process used for transforming titanium ingots into useful mechanical parts. Scraps take two forms, namely, bulky scraps, which are produced by cutting, and chipped scraps, which are produced by milling. Bulky scraps are comparatively easier to recycle because of their small surface area and less oxygen content; as a result, they pose only a small risk of explosion. In contrast, chipped scraps pose a higher risk of explosion, because of which, their recycling is complicated, resulting in most such scraps being discarded. With the aim of avoiding this waste, we proposed a novel process for converting chipped scraps into stable carbide materials. Methods typically applied to reduce particle size and impair the formation of solid solution type phase in the carbide materials were used to improve the mechanical properties of carbides prepared from chipped scraps. Our novel recycling process reduced carbide production costs and improved carbide quality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.255-255
• /
• 2013

WC-Co 초경합금은 실온경도, 고온경도, 강도, 내마모, 내충격 등 기계적 특성이 우수하여 공구재료, 절삭공구 및 고압용 부품 등 다양한 응용분야를 가지고 있으며 WC-Co 분말 코팅같은 경우 항공분야, 일반 공업 분야에 내마모 특성 및 내열특성 향상을 위한 코팅용 소재로서 활용되어 지고 있다. 활용분야가 넓은 WC-Co 초경합금의 제조방법은 WC, Co 분말을 혼합하여 약 900도에서 1차 예비소결 후 원하는 형상 가공 후 약 1,300~1,600도에서 2차 소결을 진행한다. 지금 현재 초경분말의 조성, 크기와 같은 변수들에 따른 초경합금의 기계적 특성 변화에 대한 연구가 계속적으로 진행되고 있다. 본 연구에서는 WC-Co 분말의 소결 특성을 향상시키고자 Planetary ball mill 장비를 활용하여 볼 밀링 공정을 진행하였고 Spark plasma sintering 장비를 활용하여 빠른 소결을 진행하였다. WC-Co 분말의 미세구조, 입도, 조성 및 분산의 변화를 관찰하기 위해 볼 밀링 전, 후 분말을 분석하였고 제조된 분말의 소결 특성을 확인하기 위해 상용화 된 WC-Co 분말의 소결 특성과 비교 평가하였다. 분석 결과 볼 밀링 공정 후 분말은 약 15 ${\mu}m$에서 4.4 ${\mu}m$로 미세해지는 것을 확인하였고 밀링 후 분말로 초경합금을 제작하였을 때 기존 상용화 초경합금제작 온도보다 약 100~400도 낮아지면서 경도 값은 약 20% 향상된 것을 확인할 수 있었다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.132-140
• /
• 1998

Recently, precision machining technology has been developed continuously in order to make high productivity and quality assurance of the precision parts of several industrial fields. Waviness may occur on the surface of the machined parts due to the table motion error and the dynamic cutting mechanism between the tool and the workpiece. The waviness may fall off the form accuracy of the precision machine parts. In the research, a micro cutting device with piezoelectric actuator has been developed to control precise depth of cut and compensate the waviness on the surface of the workpiece. Experiments have been carried out in the precision lathe. The characteristics of the surface profile and cause of the waviness profile have been analyzed and waviness profiles of some cause have been compared with those of experiments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.68-71
• /
• 2000

A tool holder system has been designed to measure cutting forces in diamond turning. This system includes a 3-component piezo-electric tranducer. In this research, tool holder system is modeled by considering the element dividing, material properties, and boundary conditions using MSC/PATRAN. Mode and frequency analysis of structure is simulated by MSC/NASTRAN, for the purpose of developing the effective design. In addition, tool holder system is verified by vibration test using accelerometer. This system will aid to the development of Fast Tool Servo.

• CDE review
• /
• v.8 no.2
• /
• pp.47-52
• /
• 2002

레이저를 이용한 직접금속성형기술(영문명 : DMT: Direct Metal Tooling)은 고 부가가치의 기능성 소재(금속, 합금, 세라믹 등)의 미세한 분말을 원하는 3차원 공간상에 주사함과 동시에 이를 레이저로 직접, 순간 용착시키며 이것이 공간상에서 축적되가면서 미리 정해진 3차원 파트형상이 자동적으로 빌드업 되도록 하는 고도의 정밀제어 기술을 요하는 신기술이다. 이는 컴퓨터에 저장된 3차원 디지털 형상정보(digital data of 3D subjects)만 갖고 있으면 이로부터 그에 해당하는 금속파트형상을 적절히 소재분말을 이용하여 곧바로 실물로 재현하여 얻을 수 있게 됨을 의미하며 이로서 기존에 절삭기계를 이용한 가공 공법보다 손쉽고 빠르면서도 반면 기계적 성질은 종전기술보다 월등히 우수한 B차원 금속 파트나 금형 형상을 소재의 낭비가 전혀 없는 환경 친화적인 방법으로 제작할 수 있는, 소위 밀레니엄시대를 대표하는 최첨단 미래형 기술의 구현이다.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1793-1797
• /
• 2003

After the micro turning lathe was developed in the last year by AMR Laboratory in Yeungnam university, a micromilling machine is developed for micro/meso machining. This machine is integrated with PZT-driven micro-sliders, micro-linear encoders, aerostatic spindle which has maximum 150,000 rpm. It is applicable to milling and drilling of micro scale. This paper presents the possibility of micro/meso machining and characteristics of micro end milling process by using micro machine. A machining of micro parts using 0.2 mm flat end mill was achieved by micro-milling machine. Experimental results show the machining capability and positional accuracy of this machine is good enough for machining micro parts.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.2
• /
• pp.117-126
• /
• 2000

Recently micro deep hole drilling is required in the whole industry. However, micro deep hole drilling has still much difficulty because of the lack of drill rigidity and the interruption of chip. We treated a micro deep hole(diameter 0.35mm, depth 3mm) used in a connector jack pin. Therefore, a surface roughness is very important. In this paper, we studied on the variation of the surface roughness for cutting conditions during micro deep hole drilling of Be-Cu material. Most of all, we tried to drill on CNC for the realization of automatization.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1272-1278
• /
• 2012

The micro barrier rip array structures have been applied in a variety of areas including as privacy films, micro heat sinks, touch panel and optical waveguide. The increased aspect ratio (AR) of barrier rip array structures is required in order to increase the efficiency and performance of these products. There are several problems such as burr, defect of surface roughness and deformation and breakage of barrier rip structure with machining high-aspect ratio micro barrier rip array structure using orthogonal cutting method. It is essential to develop technological methods to solve these problems. The optimum machining conditions for machining micro barrier rip array structures having high-aspect ratio were determined according to lengths ($200{\mu}m$ and $600{\mu}m$) and shape angles ($2.89^{\circ}$ and $0^{\circ}$) of diamond tool, overlapped cutting depths ($5{\mu}m$ and $10{\mu}m$), feed rates (100 mm/s) and three machining processes. Based on the optimum machining conditions, micro barrier rib array structures having aspect ratio 30 was machined in this study.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.874-880
• /
• 2003

The effect of h-BN content on microstructure, mechanical properties, and machinability of AlN-BN based machinable ceramics were investigated. The relative density of sintered compact decreased with increasing h-BN content. The four-point flexural strength also decreased from 238 MPa of monolith up to 182 MPa by the addition of 30 vol％ h-BN. Both low Young's modulus and residual tensile stress, formed by the thermal expansion coefficient difference between AIN and h-BN, might cause the strength drop in AlN-BN composite. The crack deflection, and pull-out phenomena increased by the plate-like h-BN. However, the fracture toughness decreased with h-BN content. The second phases, consisted of YAG and ${\gamma}$-Al$_2$O$_3$, were formed by the reaction between Al$_2$O$_3$ and Y$_2$O$_3$. During end-milling process, feed and thrust forces measured for AlN-(10～30) vol％ BN composites decreased with increasing h-BN particles, showing excellent machinability. Also, irrespective of h-BN content, relatively good surfaces with roughness less than 0.5 m (Ra) could be achieved within short lapping time.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.408-413
• /
• 2013

Micro-features such as grooves and lenses, which perform optical functions in flat displays, should be manufactured with a good form accuracy because this is directly related to their optical performance. As the size of the display increases, it is very difficult to maintain a high relative accuracy because of the inherent geometric errors such as the waviness of a large-area plate. In this paper, the optical effect of these geometric errors is investigated, and surface-referenced micro-grooving to measure and compensate for such geometric errors on line is proposed to improve the form accuracy of the micro-grooves. A PZT-based fast depth adjustment servo system is implemented in the tool holder to maintain a uniform groove depth in reference to the wavy surface. Through experiments, the proposed method is shown to be an efficient way to produce high-quality micro- grooves on a wavy die surface.