• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.1
• /
• pp.109-117
• /
• 2004

The objective of this study is to investigate the effect of the spray characteristics on the etching characteristics for the optimization of etching process in the micro fabrication industry. The etching characteristics such as etching rate and etching factor were investigated under different etching conditions. To compare with the etching characteristic, the spray characteristics such as droplet size and velocity were measured by PDA system. The etching rate was increased in case of high spray pressure and in the region of spray center. The etching factor was increased with decrease in the distance from nozzle tip and increase in the etchant temperature. It was found that the spray characteristics were correlated with the etching characteristics.

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.204-211
• /
• 2000

The $(Y,Gd)BO_3:Eu$ red phosphors for PDP application were synthesized by ultrasonic spray method and then their photoluminance properties were investigated under 147nm VUV irradiation. The precursor solution of acetates of Y, GD and Eu and boric acid diluted in water was sprayed using 1.7 MHz ultra-sonic sprayer into the reaction tube held at high temperature. The as-sprayed particles were amorphous phase having C-C and C-H bonds due to the insufficient thermal reaction during the pass along the tube. But the sprayed samples followed by heat treatment at $1100^{\circ}C$ had the same crystal structure and chemical composition as those samples followed by solid state reaction. It was found that the $(Y_{0.7}Gd_{0.3})_{0.95} BO_3:Eu_{0.05}^{3+}$ phosphor particles synthesized by spray at $500^{\circ}C$ and then heat treated at $900^{\circ}C$ had a spherical-like shape and fine particle size at $0.7{\mu\textrm{m}}$ having a narrow size distribution, while the phosphor particles made by solid state reaction was $3{\mu\textrm{m}}$ coarse and non-uniform size distribution. The emitting intensity under 147nm VUV excitation for $(Y_{0.7}Gd_{0.3})_{0.95}BO_3:Eu_{0.05}^{3+}$ phosphor prepared by spray method was found to be higher than those phosphor made by solid state reaction and the commercial $(Y,Gd)BO_3:Eu$ product.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.1-7
• /
• 2017

The atomization of a liquid into multiple droplets has many important industrial applications, including the atomization of fuels in combustion processes and coating of surfaces and particles. Ultrasonic atomizing nozzle has a transducer that receives electrical input in the form of a high frequency signal from a power generator and converts that into mechanical energy at the same frequency. Liquid is atomized into a fine mist spray using high frequency sound vibrations. In coating applications, the unpressurized, low-velocity spray reduces the amount of overspray significantly because the droplets tend to settle on the substrate, rather than bouncing off it. The spray can be controlled and shaped precisely by entraining the slow-moving spray in an ancillary air stream using specialized types of spray-shaping equipment. The desired patterns of spray can be obtained using an air stream. To simulate the water mist behavior of an ultrasonic atomizing nozzle using an air stream, the Lagrangian dispersed phase model was employed using the commercial code FLUENT. The effects of the nozzle contraction shape, water droplet size and the pneumatic pressure drop on the spray characteristics were investigated to obtain the optimal condition for coating applications.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.75-79
• /
• 2010

The precursor powders with thin wall structure were prepared by spray pyrolysis from the spray solution with ethylenediaminetetraacetic acid, citric acid and $NH_4Cl$ flux. The $BaMgAl_{10}O_{17}:Eu$ phosphor powders formed from the spray solution without organic additives and flux material had sizes of $1{\sim}5{\mu}m$ and hollow structure with high thickness at post-treatment temperature of $1,200^{\circ}C$. However, $BaMgAl_{10}O_{17}:Eu$ phosphor powders formed from the spray solution with ethylenediaminetetraacetic acid, citric acid and $NH_4Cl$ flux had fine size and plate-like shape. The mean crystallite sizes of the phosphor powders with fine sizes were 23, 35, and 33 nm when the content of $NH_4Cl$ flux were 0, 6, 35 wt% of phosphor. The photoluminescence intensity of the phosphor powders formed from the spray solution with the optimum amount of $NH_4Cl$ flux as 35 wt% was 215% of that of the phosphor powders formed from the spray solution without flux material.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.211-219
• /
• 2017

The spray-applied waterproofing membrane is installed on shotcrete or concrete surface to make impermeable layer with 3-5 mm thick for the purpose of waterproofing. This study aims to determine the internal structure of a spray-applied waterproofing membrane including pores by using X-ray CT technique. Before obtaining X-ray images of the membrane specimens, a waterproof performance test was performed on the membrane specimens with a water pressure of 500 kPa for 28 days. Results show that the movement of moisture is made through micropores. This is based on the fact that the large pores inside the membrane are not saturated and the degrees of saturation of the micropores are high. X-ray image is effective for determining the pore size distribution and whether the membrane with pores contains the water However, it is necessary to pay attention to the determination of water content, since water content may vary depending on the threshold value of X-ray image analysis applied to calculate the water content.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.122-122
• /
• 2017

인산-망간 화성피막의 경우 양질의 피막층을 형성하기 위하여 표면조정제를 사용하고 있으며, 화성피막 직전에 표면 조정제 처리를 하여 피막 결정의 미세, 치밀, 균일하게 하는 동시에 피막의 화성시간을 단축하고 있다. 본 연구는 표면조정제의 입자 사이즈에 따른 화성피막 입자 사이즈 변화 및 물리적인 특성 향상을 확인하였다. 하지금속 소재로는 기계구조용 탄소강재(SM45C)을 $50{\times}50{\times}3mm$로 제작하였고, 전처리 공정으로는 탈지 ${\rightarrow}$ 에칭 ${\rightarrow}$ 디스머트 후 표면조정제 입자 사이즈별로 표면조정 후, 화성피막 처리를 하였으며 각 조건에 따른 피막 층의 미세조직은 SEM을 사용하여 관찰하였고, 윤활성은 내마모시험기(Ball on disc)를 사용하여 마찰계수 측정을 통해 확인하였으며, 내식성은 5% NaCl 염수분무를 실시하여 적청 발생 면적으로 측정하였다. 표면조정제의 입자 사이즈는 4종류로 세분화하여 표면조정 후 화성피막 처리하였으며, 표면조정제의 입자 사이즈를 미세화함에 따라 화성피막의 입자 사이즈가 미세, 균일해지고 피막의 치밀도가 향상됨을 확인할 수 있었다. 표면조정제의 미분화는 소재 표면에 작고 치밀한 결정(활성점)을 만들며, 표면조정제의 입자 사이즈가 작아질수록 이러한 활성점의 크기가 미세해지고 화성피막의 입자 사이즈 또한 미세화 시키는 역할을 하는 것을 확인 할 수 있었다. 이처럼 표면 조정제의 입자 사이즈에 따른 화성피막 입자 사이즈 및 물성변화는 SEM, 내마모시험 및 내식성 시험을 통하여 확인할 수 있었다. 즉, 표면조정제의 입자 사이즈가 미세해질수록, 화성피막의 입자사이즈가 미세화되었고, 윤활성 및 내식성이 향상되는 것을 확인 할 수 있었다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2007.11a
• /
• pp.143-148
• /
• 2007

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1994.04c
• /
• pp.28-28
• /
• 1994

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.1
• /
• pp.274-276
• /
• 1999

Sardine oil was microencapsulated by spray drying method in wall systems containing corn syrup in combination with sodium casein or wheat protein. Analysis of microencapsulation yield of sardine oil was carried out by a modified soxhlet method which could reduce the extraction time of surface oil. Microencapsulation yield of sardine oil was ranged from 65.3 to 93.5 % depending on the sodium casein content.

• Journal of the Korean Society of Safety
• /
• v.11 no.4
• /
• pp.24-28
• /
• 1996

The speckle photography technique is one of the novelest velocity measurement methods. This study examines the possibility that this technique will become practically applicable. In this study, LSP is applied to the fine water mist spray. Moreover, a He-Ne gas laser is employed as the light source in order to enhance the validity of this technique. It becomes clear that this technique using a He-Ne gas laser can obtain a whole instantaneous two-dimensional velocity distribution and also apply to test the performance of fine water spray.