• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.394-398
• /
• 2011

The effect of two-fluid fogging system on the control of Bemisia tabaci in tomato cultivation was evaluated in a greenhouse. The number of Bemisia tabaci was decreased by 87% from the fog treatment for 7 days. During the fog treatment, the mean daily temperature was decreased by $2^{\circ}C$ and the mean daily relative humidity was increased by 3~4% as compared to the non-treatment. The reduction of Bemisia tabaci in the treatment might not be resulted from the differences in temperature and humidity in the greenhouse. The sound coming from the two-fluid fogging system did not affect when it was operated without water inside. Therefore it was concluded that water droplets coming out the nozzle reduced the growth and the movement of whiteflies because the suspension of tiny water droplets were attached on the skin of whiteflies.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2007.11a
• /
• pp.143-148
• /
• 2007

• Resources Recycling
• /
• v.8 no.4
• /
• pp.45-56
• /
• 1999

The purpose of tlus sludy was to preparc raw material powder for Mn-Zn iclrile, h m mined mill scale and fero-Mn, usins a co-spray roasting process The mill scale and ferra-Mn uscd in this raalins process was rcf~nedb y mesn-ns of a slxc~apl rxcss ~nvolvinm~a te~ialsc ontalning imp~u-ltleso r less than 100 pprn In this study an effeclive spray roaster system. wllich produces fme complex oxide powder, collects produccd ~owder.,m d prcvel~tse ~~llssiooifi HCI gas. was also manufactured. By means of spray~ngp urifcd raw malerial solu~lionl nln a manufacued high tcmpervture rumace. &-ferrite powder and a comnpleu o ~ d e powder of Fe,O; and M,x203 were manufactured. The chmcterlstics of the composllion. surface urca, and p'miicle size dismbulion or the produced powder were exmined. ptoduced powdcr was then ~ m e dwi tli ZnO powder. aid olher addilives of defined cornposnion, and Mn-Zn femite cares werc praiuccil by meuns of Sorlning and closely controlled sintering processes. The magpelic p~oprlieso f c olo~ss, initlal permeability. mauin~u~mnn agnehc flux. coz~civcr orcc and residual magnccic flux for the above cores we,= measured, and fmm Il~ase I-csulls the eflicacy of lhe co-spray roasling pncess to pl.ellare raw material powder lor Mn-Zn ferntc was established

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.123-123
• /
• 2012

초소수성 표면은 150도 이상의 높은 물 접촉각과 10도 이하의 낮은 sliding angle을 가지며 self-cleaning, anti-contamination 기능을 갖고 있는 것이 특징이다. 재료표면의 친수성과 소수성을 제어하기 위해서는 화학적 인자인 물질의 표면에너지나 물리적 인자인 표면 거칠기를 조절하는 방법이 있다. 초소수성 표면을 구현하기 위해서는 표면의 거칠기를 증가시키거나 표면 에너지를 낮춰야 하는데 고체 표면의 거칠기를 증가시키기 위해서는 일반적으로 표면에 microscale과 nanoscale의 계층구조를 형성시키는 방법이 사용된다. 자연계에 매우 풍부하게 존재하는 실리카는 내구성과 내마모성, 화학적 안정성, 고온 안정성 등을 지니고 있으며 인체에 무해하기 때문에 다양한 종류의 전자기기 및 부품의 내외장 코팅에 적용이 검토되고 있다. 이러한 관점에서 본 연구에서는 초소수성 코팅층을 구현하는 하나의 방법으로서 졸-겔방법으로 실리카 졸을 합성하여 전기분무법을 사용하여 microscale의 실리카 입자 코팅층을 형성하였으며, 표면 미세구조 조절 및 계층구조 형성과 불소화처리 공정을 통하여 초소수성 실리카 코팅층을 제조하였다. 이러한 초소수성 실리카 코팅층의 표면거칠기, 자외선 영향향, 내구성 등을 초소수성 관점에서 평가하였다.

• Journal of the Korean Society of Safety
• /
• v.11 no.4
• /
• pp.24-28
• /
• 1996

The speckle photography technique is one of the novelest velocity measurement methods. This study examines the possibility that this technique will become practically applicable. In this study, LSP is applied to the fine water mist spray. Moreover, a He-Ne gas laser is employed as the light source in order to enhance the validity of this technique. It becomes clear that this technique using a He-Ne gas laser can obtain a whole instantaneous two-dimensional velocity distribution and also apply to test the performance of fine water spray.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.211-219
• /
• 2017

The spray-applied waterproofing membrane is installed on shotcrete or concrete surface to make impermeable layer with 3-5 mm thick for the purpose of waterproofing. This study aims to determine the internal structure of a spray-applied waterproofing membrane including pores by using X-ray CT technique. Before obtaining X-ray images of the membrane specimens, a waterproof performance test was performed on the membrane specimens with a water pressure of 500 kPa for 28 days. Results show that the movement of moisture is made through micropores. This is based on the fact that the large pores inside the membrane are not saturated and the degrees of saturation of the micropores are high. X-ray image is effective for determining the pore size distribution and whether the membrane with pores contains the water However, it is necessary to pay attention to the determination of water content, since water content may vary depending on the threshold value of X-ray image analysis applied to calculate the water content.

• Journal of the Korean Vacuum Society
• /
• v.4 no.2
• /
• pp.183-188
• /
• 1995

고에너지(50-200KeV)로 가속된 이온을 모재표면에 물리적으로 투입하므로써 표면의 조성 및 조직을 변화시키는 공정인 이온주입기술을 이용하여 경량고강도소재로 각광받고 있는 AI2218 합금의 재식성 향상을 연구하였다. 질소이온주입은 DuoPIGatron 이온원을 사용하여 가속전압 100KeV, 조사량 $1{\times}10^{17}ions/\textrm{cm}^2$~$5{\times}10^{17}ions/\textrm{cm}^2$의 조건으로 행하였으며 AI합금의 열화를 방지하기 위하여 시편온도를 $60^{\circ}C$이하로 유지하였다. 질소이온 주입재의 재식성 평가를 위하여 3.5% NaCI 용액에서 양극분극시험 및 5% NaCI 용액에서 염수분무시험을 행하였다. Auger Electron Spectroscopy와 Transmission Electron Microscopy을 이용하여 표면의 질화물형성 여부를 조사하였으며, Scanning Electron Microscopy을 이용하여 부식된 표면을 관찰하였다. AI2218합금에 질소이온을 주입한 결과 표면에 미세한 AIN 석출물을 형성하였으며 이러한 질화물형성에 의해 공식(pitting)발생을 억제하고 부식전류밀도를 감소시켜 내식성이 향상되었다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.267-270
• /
• 2007

오존무 분사장치는 흡입구와 내에 소정의 공간이 형성된 케이스와 자동 손잡이와 $360^{\circ}$회전이 가능해 운반 및 이동이 간편한 케이스, 상기 케이스의 내부 소정 부위에 공기 흡입구로 흡입되는 공기 중에 포함된 먼지 및 습기를 제거하는 제습 장치와, 원료가스인 공기를 일정하게 제공하는 송풍기, 강력한 살균 소독기능을 지닌 오존발생기, 오존을 발생시키기 위한 고주파 펄스 전원장치, 입자경이 $3{\sim}40{\mu}m$이하의 이류체 미세 분사형 노즐, 살수통(물을 담는 용기) 및 기능 조절부(펄스전원제어, 타이머 조절, 송풍기 제어, 이류체 미세 분사형 노즐스위치 제어)로 성되어 작동하는 것으로 일반적인 가습기와는 다르다. 그리고 강력한 살균, 소독, 탈취 및 대기의 정화 기능이 있는 오존을 이용하는 동시에 기존의 방식보다 간단한 구조의 분무발생 수단을 구비함으로써 전체적으로 구성을 간단하게 하면서 대기 정화 효율을 향상시키는 장점이 있다.

• Journal of the Korean Society of Safety
• /
• v.21 no.6 s.78
• /
• pp.46-54
• /
• 2006

Fire extinguishing experiment was conducted with water mist nozzle in case of the pool fire, cascade fire and spray fire on flammable liquid of class B whether water mist system can be effective system for power transformer fire scenario. In the event of a pool fire, flow rate and time to extinguish was inclined to be increased according to the obstruction rate of ignition space. Furthermore, the performance of fire extinguishing depended upon the spraying angle of the nozzles. In case of cascade fire, the effect of extinguishment was began to show from a combustion pan filled with fuel and fuel flowing plate later on.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.109-114
• /
• 2010

Water mist fire suppression system is environmental system and needs a flange pump to jet water. In this research, high pressure Nitrogen cylinder is used as a pressurizing source instead of flange pump, and also we tried to find the possibility of using compressed Nitrogen as a fire suppression agent. As a result, it was possible to design water mist fire suppression system with Nitrogen cylinder and suppress oil fire effectively. With DK1.58 nozzle, the optimum Nitrogen pressure was 80bar and the pressure was stable during water mist spray. However, jet of Nitrogen was not effective fire suppression agent when it was dually used with water mist because water mist has blown away, and it is efficient way to use compressed Nitrogen as a pressurizing source only.