• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1174-1180
• /
• 1996

Potassium hexatitanate whisker was effectively prepared with calcination and flux method by using industrial $TiO_2$, $K_2CO_3$ and $K_2MoO_4$ as the starting materials. When it was synthesized by the calcination method, the filtrate after boiling water treatment was required a neutralization, as the pH of filtrate was higher than 9. Because K component was very small, recovery of K component was not economically suitable. In case of flux method, flux was recovered 96.1% of Mo component and 91.8% of K component at $K_2MoO_4$, for 10th treatment in boiling water of 100ml to 10g.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.5
• /
• pp.524-528
• /
• 2002

Green layer, Enteromorpha prolifera, is regarded as one of important materials for food processing in Korea. The acidic water-soluble polysaccharide (CPC-PS) isolated from the alga with hot water and cetylpyridium chloride was mainly constituted of rhamnose, xylose, uronic acid and sulfate. To determine the glycosyl-linkages and positions of sulfate by methylation, the CPC-PS was reduced and/or sulfates. A marked increase of glucose content in the reduced polysaccharide indicated that glucuronic acid was a major sugar in the polymer and sulfation was deduced to occur on O-3 of rhamnose and O-2 of xylose. According to the methylation analysis of the native, reduced, desulfated and reduced-desulfated polymers, CPC-PS mainly composed of 1,4- and 1,2,3-linked rhamnose 3-sulfate, 1,4-linked xylose 2-sulfate, 1,4-linked xylose and 1,4-linked glucuronic acid. Minor 1,4-linked rhamnose and 1,4,6-linked galactose residues were also detected.

• Journal of the East Asian Society of Dietary Life
• /
• v.12 no.1
• /
• pp.32-37
• /
• 2002

In order to promote the utilization of persimmon leaf as food, chemical components in freeze dried Persimmon leaves were analyzed. The proximate composition was composed of moisture(79.65%), crude protein(17.97%), crude fat(1.33%), ash(2.37%), crude fiber(2.01%). During growth, moisture content was decreased and crude fat, crude fiber and ash were increased, respectively. Free sugar was composed of glucose, fructose, sucrose, raffinose. Nonvolatile organic acid contents were composed of oxalic acid, levulenic acid, magic acid and citric acid in the order. 18 amino acids of total amino acid in persimmon leaves were detected and major amino acid were glutamic acid, aspartic acid, leucine, phenylalanine, arginine and valine. The soluble tannin and vitamin C of persimmon leaves were 6859.37 mg% and 1487.12 mg%. During growth, its contents increased and then decreased after 20th June.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.144-144
• /
• 2016

플라즈마 전해 산화법(Plasma electrolytic oxidation)에 의해 형성된 코팅층은 특유의 기공구조로 인해 부식 환경에 노출 시 부식액의 침투가 급속히 이루어지는 단점이 있다. 이를 극복하기 위한 방법으로 유기코팅, sol-gel법, 폴리머 코팅 등에 의해 기공을 봉공(sealing)하는 방법이 제안되고 있다. 본 연구에서는 Al 합금의 플라즈마 전해 산화 처리 후 질산 세륨 수용액(Cerium nitrate solution)에 의한 봉공 효과를 확인하고자 하였다. PEO 코팅을 위한 전해액은 2g/L의 KOH와 $2g/L\;Na_2SiO_3$를 증류수에 용해시켜 준비하였다. PEO 코팅층은 Al 시편을 전해액 내에 위치시켜 양극으로 하고 STS를 음극으로 하여 $0.1A/cm^2$의 펄스 정전류밀도(주파수: 100Hz, 듀티비: 20%)를 15분 동안 인가하여 형성시켰다. 봉공을 위한 실링액은 증류수에 $0.3g/L\;H_2O_2$와 $1g/L\;H_3BO_3$를 첨가하고, $Ce(NO_3)_3$를 농도 변수로 첨가하여 준비하였으며, PEO 코팅 처리된 시편을 실링액에 침지하여 실링액의 농도와 침지시간을 달리하여 봉공을 실시하였다. 제작된 PEO 코팅층에 대해 SEM, EDS, XRD를 이용한 표면분석을 실시하였으며, 내식성을 확인하고자 동전위분극시험을 실시하였다. 연구 결과, 세륨 실링 처리된 PEO 코팅 층에서 미량의 세륨 성분이 검출되었으나, 세륨계 화합물 생성에 의한 마이크로 크기의 기공의 폐쇄는 관찰되지 않았다. 또한, 전기화학적 특성 평가 결과 실링 처리된 PEO 코팅층의 경우 Al 모재에 비해 2차수 정도 감소된 부식전류밀도를 나타내었다. 이 같은 내식성의 향상은 세륨 성분에 의한 부식 억제 효과 때문으로 판단된다.

• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.114-120
• /
• 2006

Bismuth vanadate is one of the environmentally benign substitutes for conventional inorganic pigments composed of heavy metals. The effect of process parameters on the physical properties of bismuth vanadate pigment prepared from aqueous solutions of potassium vanadate and bismuth nitrate were experimentally examined. Two aqueous solutions were fed into precipitation chamber at the same flow rate, and precipitates were formed at primary pH of 4.5 and secondary pH of 7.0~7.5. After aging for 3 hours in reaction mixture, 3 hours' calcination at $400^{\circ}C$ gave bismuth vanadate pigment with a good color and hiding power. Increase in molybdenum concentration in reaction mixture increased the hiding power of the pigment, but the other minor constituents had minor effect on the physical properties of the pigment.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.686-691
• /
• 2008

There are no many research reports on the preparation of ZnO by electrochemical oxidation since the zinc oxide is very easily dissolved in an acidic or basic environment, even though zinc oxides have attracted many attentions because of their optical/electrical properties. In this paper, we describe the fabrication of self-ordered stripes of ZnO by anodization of Zn in an ethanolic sulfuric acid. The formation of stripes of ZnO originating from Zn is attributed to water-selective dissolution of ZnO during anodization. We study in detail the effects of concentration of $H_2SO_4$, applied potential, anodization time, and addition of a small amount of water on the fabrication of stripes of ZnO. Mechanisms for the fabrication of ZnO stripes are discussed in terms of the above-mentioned effects.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.137-141
• /
• 2008

Copolymerization of ethylene and ${\alpha}$-olefin using $rac-Et[Ind]_2ZrCl_2/MAO$ catalyst embedded onto polysty-rene was examined. The embedded catalyst was prepared by polymerizing a small amount of styrene with $rac-Et[Ind]_2ZrCl_2$. The catalytic activities of the embedded catalyst were higher than those of the homogeneous catalystregardless of comonomer type and the characteristic of the active sites of the embedded catalyst was not affected duringthe embedding process. Based on the DSC and NMR analyses of the produced copolymers, it was thought that theembedded catalyst had similar or slightly better comonomer incorporation ability. Furthermore, the copolymers produced by the embedded catalyst had higher bulk densities and better particle morphology than those by the homogeneous catalyst.

• Journal of the Korean Ceramic Society
• /
• v.39 no.4
• /
• pp.394-400
• /
• 2002

Tin oxide thin films doped with silicon as anodes for lithium secondary battery were fabricated by R. F. magnetron sputtering technique. The electrochemical results for lithium secondary battery anodes showed that addition of silicon decreases the oxidic state of tin, and, hence, reduced the irreversible capacity during the first discharge/charge cycle. The (110),(101),(211) planes were grown with increasing substrate temperatures. The reversible capacity of thin films fabricated in conditions of $300^{\circ}C$ substrate temperature and 7:3 $Ar:O_2$ ratio was 700 mAh/g.

• Economic and Environmental Geology
• /
• v.29 no.6
• /
• pp.689-698
• /
• 1996

The coal-bearing metapelites from the Hoenam area are interbedded within the Ogcheon Supergroup, which are composed mainly of graphite, quartz, muscovite and associated with trace amount of biotite, chlorite, pyrite, rutile and barite. Although the formation was mined for coal, and the contents of V, U and Mo are a higher grade in coal formations than the host metapelites. The ratios of Al/Na and K/Na in coal formation are very heterogeneous and wide range from 10.28 to 90.91 and from 3.73 to 36.60, respectively. The V content increase with increasing Al and Ba contents, but the U and Mo are not related with other elements. Those are suggested that controlled of mineral compositions in coaly metapelites due to substitution, migration and reequilibrium of elements by regional metamorphism. These coal formation were deposited in basin of marine environments and the REE of these rocks are not influenced with metamorphism and hydrothermal alterations on the basis of Al content versus La, La against Ce, the ratios of La/Ce (0.23 to 0.73) and Th/U (0.03 to 16.6). These rocks also show much variation in $La_N/Yb_N$ (0.53 to 14.19), Th/Yb (0.51 to 6.00) and La/Th (0.15 to 18.92), and their origin is explained by derivation from a mixture of sedimentary and metasedimentary rocks. The wide range in trace and REE element characteristics as Co/Th (0.07 to 3.00), La/Sc (0.04 to 23.48), Sc/Th (0.06 to 7.57), V/Ni (2 to 3319), Cr/V (0.03 to 1.06) and Ni/Co (1.00 to 79.85) of these coaly metapelites argues for inefficient mixing of the various source lithologies during sedimentation.

• Resources Recycling
• /
• v.10 no.4
• /
• pp.34-41
• /
• 2001

A research was performed to evaluate a use of shredder residue to currently dispose of at landfills. Laboratory analyses were conducted to determine especially the fuel characteristics of shredder residue. For this aim, shredder residue was classified by the particle size as well as by the type of material and the content of Cl, S, ash, and calorific value were determined. Due to the chlorinated plastic content of shredder residue, mean concentration of Cl was found to exceed 4wt% except one sample while that of S was ranged from 0.25 to 0.39 wt%. As far as calorific value was concemed, plastic was observed to be more than 10,000 kcal/kg while wood/paper and fiber accounted for approximately 4,000 kcal/kg. Shredder residue was found to contain varying trace amounts of metal elements, including Fe of 6∼8.5 wt%. Hg and Cr(VI) were not detected, however, while Cd was contained as small as 0.0004-0.0009 wt%.