• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.225-232
• /
• 2013

The inorganic insulating material was fabricated with quartzite, ordinary portland cement(OPC), lime, anhydrous gypsum and foaming agent by hydrothermal reaction. The inorganic insulating material was fabricated by using autoclave chamber under high-temperature and high-pressure. The inorganic insulating material is a porous lightweight concrete. Because of its porous structure, properties of inorganic insulating material were light-weight and high-heat insulation property. Properties of fabricated inorganic insulating material were $0.26g/cm^3$ in specific gravity, 0.4MPa in compressive strength and 0.064W/mK in thermal conductivity. In this study, the inorganic insulating material was fabricated and analyzed at different size of quartzite/OPC, various foaming reagent and functional additives to improve the properties. Consequently, polydimethylsiloxane can improve density and thermal conductivity. Especially, polydimethylsiloxane showed excellent improvement in compressive strength.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.3
• /
• pp.89-95
• /
• 2013

This study focused on the development on functional shoe apparatus so that the appropriate impact can be applied to the feet in order to improve the density of mineral bone at lower limbs. The model with structure proposed in this study had an effective stress about 20 to 100% higher by comparing that of the model without it among most of 15 bone extraction points. Though there is a limitation that the finite element analysis data from the human body model are not the value of mineral bone densities by measuring directly but the effective bone stresses against impact, the proposed structure is designed to influence the increase of bone mass and improve the density of mineral bone by effecting the improvement of the density of mineral bone actually.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.219-224
• /
• 2013

In this study, the inorganic insulating material was fabricated with quartzite, ordinary portland cement(OPC), lime and anhydrous gypsum. After characteristic analysis of slurry, the optimum mixing ratio was derived with different $CaO/SiO_2$ mole ratio. Based on derived mixing ratio, the inorganic insulating material was fabricated at different water content and hydrothermal synthesis conditions. Specific gravity was $0.26g/cm^3$, compressive strength was 0.4 MPa, and thermal conductivity was 0.064 W/mK. This properties were enhanced performance of conventional ALC (Autoclaved Lightweight Concrete). And it can replace organic insulation with harmless inorganic insulation through continues research and development.

• Journal of Adhesion and Interface
• /
• v.16 no.2
• /
• pp.76-82
• /
• 2015

W/O emulsions were prepared from the aqueous solution containing NIPAAm, MBA, and APS in the continuous phase of toluene and mineral oil mixture with HMP and Span80 by using SPG membrane emulsification, and followed by the formation of PNIPAAm hydrogel microspheres through UV photopolymerization. As the ratio of mineral oil to toluene increased in the continuous phase, both particle size of the hydrogel increased and density of PNIPAAm polymer in the hydrogel particle increased, and which significantly affected swelling/deswelling ratio ($V/V_o$) with temperature change around VPTT. When the polymerization temperature was below LCST ($20^{\circ}C$), PNIPAAm hydrogel showed filled particle morphology; however, it was turned out to hollow particle morphology with thick shell layer with $40^{\circ}C$. Both density of PNIPAAm and gel content of the hydrogel increased with the increase in MBA concentration.

• Applied Microscopy
• /
• v.29 no.3
• /
• pp.323-329
• /
• 1999

Synthesis of inorganic nanophase particles was performed to verify and understand the binding of non-ferrous metal ions including Al and $UO_2$ to the apoferritin molecules. Reconstituted inorganic particles of Al or $UO_2$ were identified by TEM as discrete electron dense cores encapsulated within the protein shell. The corresponding EDXA spectra confirm the presence of metal ions in the reconstituted ferritin. The Al cores of ferritin has been studied by TEM for the first time. Bimetallic cores with Al/Fe and $UO_2/Al$ were also produced and examined under TEM. Mixed metal cores encapsulated in the protein shell are well formed and its corresponding EDXA spectra also confirm the presence of metal ions in the mineral cores. Therefore, the present study proves that ferritin can be used to synthesize inorganic nanophase particles of Al and $UO_2$.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.8
• /
• pp.869-877
• /
• 2011

In order to manufacture precision parts which are used for IT and BT Industry by machining, users need higher speed & precision machining center. So, for development of this kind of machine, we designed gantry type machining center which is piling of 3 axes on one moving body and the 2-axis rotary table is fixed on the base. It is applied linear motor that is instead of ball-screw and servo-motor combination and 50,000 rpm high-speed spindle. Composite material structure called mineral casting or resin concrete is applied also. This paper presents design technology and evaluated results of high speed and precision machining center.

• Journal of Animal Science and Technology
• /
• v.46 no.1
• /
• pp.69-76
• /
• 2004

This study was performed to investigate the effect of satllower(Carthamus tinctorius L.) seed yoghurt on osteoporosis. Sham-operated rats(control) were fed basal diet for 6 weeks. Ovariectomized rats were divided into 6 different experimental groups including basal diet group(G I), yoghurt diet group(G II) and 1% to 4% safflower seed yoghurt diet group(GIII to GVI). and fed with the experimental diet for 6 weeks, respectively. The feed intake, feed efficiency ratio and body weight gains of rats fed with the experimental diet for 6 weeks were analyzed, respectively, and the weight. length, strength, mineral content and density in left femur of the animals were determined, respectively. Also, the right femur tissues were observed by Scanning Electron Microscope(SEM). The level of feed intake was not different among all experimental groups. The feed efficiency ratio and body weight gain were high in safflower seed yoghurt groups, and GV and GVI appeared high specially. Density, strength, ash content and minerals content in left femur were similar between control and G I, and increased with increasing the amount of satllower seed in yoghurt. On the other hand, weight and length in left femur showed no difference among all experimental groups. From the results of SEM observation of right femur tissue, GVI showed high healing effects. From the results of this experiment the healing effects of satllower seed yoghurt diet group were higher than those of control and G I. Among the treatments, GVI showed the highest healing effects on the osteoporosis in ovariectomized rats.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2011.10a
• /
• pp.13-13
• /
• 2011

보이차의 주요산지는 중국 운남성이며 특히 란창강 유역이 그 중심지이다. 천연 사포닌과 미네랄류를 풍부하게 포함하고, 지방의 용해, 다이어트 효과, 소화 촉진, 정장 작용, 숙취 해소, 위가 더부룩할 증상 개선, 혈당치 상승 억제, 혈액 순환 촉진에 효과가 있는 것으로 알려져 있다．또한, 면역력 강화 효과와 노화예방, 암 예방효과도 있는 것으로 알려져 있다. 보이차의 기능성 물질은 일반적으로 메탄올 또는 에탄올 용매에 의하여 추출한다. 용매에 의하여 추출하기 전에 메카노케미스트리 분쇄기술을 적용하여 전처리하면 재료의 표면적을 증가시키고 부분적으로 화학적 성분을 변화시켜 기능성 물질의 추출효율을 증가시킬 수 있다. 본 연구에서는 메카노케미스트리 분쇄기술을 적용하여 보이차를 전처리한 다음 메탄올과 에탄올 용매에 의하여 기능성 물질을 추출하여 메카노케미스트리 전처리가 항산화 물질의 추출효율에 미친 효과를 분석하였다. 보이차는 메탄올과 에탄올 추출 전에 유성밀에 의하여 분쇄되었으며 분쇄 후의 형상을 SEM 현미경으로 분석하였다. 아질산성질소 소거능은 pH 1.2에서 메탄올 용매추출을 했을 때 전처리하지 않는 경우 63.0-83.0%로부터 메카노케미스트리 분쇄기술을 적용한 전처리를 한 경우에 74.0-92.0%로 증가하였다. 전자공여능은 DPPH(1,1-diphenyl-2-pycrylhydrazyl)를 이용한 방법으로 측정하였으며, 메탄올 용매추출의 경우에 13.12-49.29%로부터 메카노케미스트리 전처리 후에 15.12-64.29%로 증가하였다. DPPH radical 50% 소거능을 나타내는 $IC_{50}$은 전처리하지 않는 경우 164 ug/mL로부터 전처리한 경우에 151ug/mL로 감소하였다.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.114-118
• /
• 2011

Even though the carbon paste electrode bound with mineral oil is useful for research about the characteristics of enzymes, it remains far from practical uses because the lack of mechanical hardness limits its practical use. When the rubber liquefied in toluene was used as a binder of carbon powder in lab, it is confirmed that the mechanical robustness of the electrode is guaranteed. In order to confirm whether it shows quantitative electrochemical behaviors or not, its kinetic parameters, e.g. the symmetry factor (${\alpha}=0.28$), the exchange current density ($i_0=4.06{\mu}A/cm^2$), the capacity of the double layer ($C_d=2.11{\times}10^{-3}F$), the Michaelis constant ($K_M=2.45{\times}10^{-3}M$), and the time constant (${\tau}_B=0.077sec$) were investigated. Our experimental observations prove that the chloroprene rubber is a promising binder for the practical use of a carbon paste electrode.

• Restorative Dentistry and Endodontics
• /
• v.36 no.2
• /
• pp.98-107
• /
• 2011

Caries remains prevalent throughout modern society and is the main disease in the field of dentistry. Although studies of this disease have used diverse methodology, recently, X-ray microtomography has gained popularity as a non-destructive, 3-dimensional (3D) analytical technique, and has several advantages over the conventional methods. According to X-ray source, it is classified as monochromatic or polychromatic with the latter being more widely used due to the high cost of the monochromatic source despite some advantages. The determination of mineral density profiles based on changes in X-ray attenuation is the principle of this method and calibration and image processing procedures are needed for the better image and reproducible measurements. Using this tool, 3D reconstruction is also possible and it enables to visualize the internal structures of dental caries. With the advances in the computer technology, more diverse applications are being studied, such automated caries assessment algorithms.