• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.217-220
• /
• 2002

할론 등 CFC 계통의 소화약제는 환경오염물질을 내포하며, 지구온난화지수와 오존파괴지수 등이 높아 전세계적으로 그 사용이 중단되고 있다 또한, IMO의 SOLAS Chapter II-2에서는 소화설비에 대한 규정으로 할론소화장치의 새로운 설치를 금지하고 있으며, 2002년 7월 1일 이전에 건조된 2,000톤 이상의 현존 여객선은 기관실 전체를 방호하는 고정식 수계국소방출소화설비를 설치하여야 한다고 규정하고 있다. 이에 대체소화기술의 하나로 관심을 끌며 연구되기 시작한 소화방법이 미세물분무노즐을 이용한 소화설비이다.(중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.11-14
• /
• 2009

The implementation of gelled propellants systems offers high performance, thrust-control, energy management of propulsion, storability, and high density impulse of solid propulsion. Present study focused on the spray behavior of liquid sheets formed by impinging jets of non-Newtonian liquids which are mixed by Carbopol 941 0.5%wt. The results are then compared with experiments conducted on spray images formed by impinging jets concerning with air-blast effect at center orifice. When gel propellants are injected by doublet impinging jets at low pressure, closed rim pattern shape appeared. As increasing air mass flow rate(decreasing GLR), spray breakup and atomization phenomenon better improved and spray structure instabilities for the effect of air-blast are also increased.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.57-60
• /
• 2011

The spray characteristics according to the recess length of the GCSC injector and the change of momentum flux ratio(MFR) of the gas and the liquid have been examined through high pressure cold flow test using a high pressure chamber. The liquid in this experiment was water, and the gas was nitrogen. The spray images were taken by a back-lit strobe imaging technique. Results showed that the spray was a wide hollow cone at the lower MFR(liquid velocity was fixed) and the spray became a narrow solid cone as the MFR was increased. And the injector with short recess length produced a narrow solid cone at the higher MFR.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.3
• /
• pp.367-373
• /
• 2003

The present study investigates the fire suppression characteristics using a water mist fire suppression system. The fire extinguishing times are measured for various fire sources, fuel types, and different total flooding rates of water mist. Pool fire with hydrocabon fuel is successfully extinguished within a minute under the operating conditions of the water mist system. Two different regimes of the smoke layer cooling are observed, such as rapid and slow cooling processes. The regimes are divided by threshold time which is calculated with auto-correlation function. The threshold time for the initial cooling decreases with increasing water flow-rates and fire sources. These initial cooling effects play an important role in preventing the occurance of flashover fire by the initial fire suppression.

• Fire Protection Technology
• /
• s.23
• /
• pp.34-38
• /
• 1997

• Monthly Duck's Village
• /
• s.132
• /
• pp.34-38
• /
• 2014

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.999-1004
• /
• 2010

Recently, many technologies have been developed in order to satisfy stringent emission regulations. However, in the case of diesel engines, the stringent emission regulations with respect to NOx and PM have not yet been satisfied. A dramatic reduction in the NOx and PM emissions could be achieved by using after-treatment systems such as lean NOx trap (LNT) and urea-SCR systems. However, the high temperature in the exhaust pipe affects the spray behavior of the secondary injector, which is used for supplying the Urea-SCR. Because of this high temperature, it is difficult to achieve uniform distribution of the reducing agent in the manifold. In this paper, the characteristics of a urea-SCR injector used for injecting in the exhaust pipe are presented. The purpose of this study was to investigate the spray characteristics of the injector, such as the spray angle, injection quantity, and SMD. In addition, laser diagnostics and high-speed-camera images were used to analyze the injector spray characteristics and to present a distribution of reduction in the transparent manifold.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.654-659
• /
• 2016

This study was designed to compare the quality characteristics of spray-dried (SD) and freeze-dried (FD) Pueraria thunbergiana extracts powder hot water extracts. Quality characteristics of the SD and FD powder including moisture content, color value, water absorption index, water solubility index, dynamic angle and antioxidant activities were evaluated. The moisture content of SD powder (1.50%) was lower than that of FD powder (2.92%). $L^*$ and $b^*$ values of SD powder was lower than of FD powder. The water absorption index was higher in FD powder (1.40) and water solubility index in SD powder (94.10%) was higher than that FD powder (90.69%). Dynamic angle of SD powder ($36.46^{\circ}$) was higher than that of FD powder ($33.30^{\circ}$). The DPPH radical scavenging activities of 5 mg/mL solution of SD powder and FD powder were 85.38 mg/mL, 59.38 mg/mL, respectively. And, the same trend was observed for the ABTS radical scavenging activities of the drying powder as that observed for their DPPH radical scavenging activities. There were relatively higher contents of phenolic compounds in SD powders than in FD powders. In conclusion, spray-dried Pueraria thunbergiana extracts showed the high WSI, polyphenol, DPPH and ABTS radical scavenging activities and low moisture content and dynamic angle than freeze dried powder.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.408-411
• /
• 2003

PPV(Positive Pressure Ventilation)란 화재진압시 송풍기를 이용하여 화염이 발생한 구조물 내부로 신선한 공기를 유입시켜 내부압력을 상승시키는 방식으로서, 구조물 내부의 전체 영역에 균일하게 열ㆍ연기 및 연소 생성물 등의 급속 배기 및 구조물 내부온도를 급속히 감소시킬 수 있는 것이 특징이다.(중략)

• Resources Recycling
• /
• v.9 no.4
• /
• pp.16-27
• /
• 2000

In order to produce raw material powder of advanced magnetic material by spray roasting process, newly modified spray roasting system was developed in this work. In this spray roasting system, raw material solution was effectively atomized and sprayed into the reaction furnace. Also, uniform temperature distribution inside reaction furnace made thermal decomposition process fully completed, and produced powder was effectively collected in cyclone and bag filter. This system equipped with apparatus which can purify hazard produced gas. In this study complex acid solution was prepared by dissolution of mill scale and ferro-Mn into the acid solution, and the pH of this complex acid solution was controlled about to 4. It was conformed that mill scale and ferro-Mn containing a lot of impurities such as $SiO_2$, P and Al could be used as raw material by reducing the impurities content of complex acid solution below 20 ppm. Complex oxide powder of Fe-Mn system was produced by spraying purified complex acid solution into the spray roaster through nozzle, and the variations of produced powder characters were studied by changing he reaction conditions such as reaction temperature, the injection velocity of solution and air, nozzle tip size and concentration of solution. The morphology of produced powder had spherical shape under the most experimental conditions, and concentration of solution. The morphology of produced powder has spherical shape under the most experimental conditions, and the composition and the particle size distribution were almost uniform, which tells the excellence of this spray roasting system. The grain size of most produced powder was below 100 nm. From the above results, it will be possible to produce ultra fine oxide powder from the chloride of Fe, Mn, Ni, Cu and rare earth by using this spray roasting system, and also to produce ultra fine pure metal powder by changing reaction atmosphere.