• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.217-218
• /
• 2015

주석은 최근 첨단 전기, 전자 제품의 핵심 소재로써 지속적인 수요 증가가 예상되는 전략 금속이다. 국내의 수요량은 2011년 기준 약 17,000톤 으로 99% 이상 수입에 의존하고 있는 실정이다. 그러나, 국내의 주석 제련 산업은 전무한 상태이며 폐자원에서 재활용하는 회수 기술도 초보 단계이다. 이러한 폐자원 발생량은 12,000톤/year이며, 약 1200억원에 달하는 규모이다. 다양한 폐자원의 선별적 전처리 요소 기술 개발 및 회수 공정 시스템 개발이 절실히 요구된다. 본 연구에서는, 주석 폐자원 중 solder 용융물 및 공정 스크랩 Lead solder, Lead-free solder 등 뿐만 아니라, ITO target 제조 시 발생하는 ITO sludge 등의 고상 폐자원으로부터 페자원의 물성을 파악하여 금속/산화물과의 파/분쇄 및 분급공정을 통하여 고품위의 주석 금속을 회수하였다. 뿐만 아니라, 고순도 주석시 발생하는 양극 슬라임 침출액 등의 액상 폐자원으로부터 희소금속의 추출 및 회수를 위해 습식 전처리 공정을 수행하였다. 침출액은 주석, 구리, 납 등의 유가금속이 이온형태로 존재하고 있으며, Chlorine이 다량 함유되어 있다. 고품위의 주석 산화물을 회수하기 위하여 침출액 내의 구리 제거 공정, Chlorine 제거 공정 등을 순차적으로 수행하여 고품위의 산화물 회수를 수행하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.198.1-198.1
• /
• 2010

고분자전해질 연료전지(PEMFC)의 핵심부품인 스택의 MEA는 전극과 멤브레인 전해질, GDL(Gas Diffusion Layer)로 구성되며, 전극은 Anoth극과 Cathod극으로 나뉘어 각각의 전극 특성에 적합한 전극촉매를 적용하게 된다. Anoth극과 Cathod극은 탄소 지지체 위에 원하는 사양의 희유금속이 도포되어 존재하는데 이들 희유금속은 그 희귀성으로 인해 사용 후 반드시 재사용되어야 한다. 사용된 전극에서의 희유금속 회수는 산침출, 불순물제거, 추출, 탈거 공정으로 이루어지며, 산침출 시 산화제로 사용된 NaOCl로 인한 침출용액 내의 Na+ 이온의 증가는 불순물제거 공정에 의해 반드시 제거되어야 한다. 따라서 본 연구에서는 CCG 방식으로 전극촉매를 GDL에 코팅한 MEA로부터 백금족 희유금속을 회수 시 MEA에 포함되어 있는 소량의 불순물을 제거하고자 한다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.303-309
• /
• 2010

For the pyrochemical process of spent nuclear fuels, recovery of LiCl-KCl eutectic salts is needed to reduce radioactive waste volume and to recycle resource materials. This paper is about recovery of residual LiCl-KCl eutectic salts in radioactive rare earth precipitates (rare earth oxychlorides or oxides) by using a vacuum distillation process. In the vacuum distillation test apparatus, the salts in the rare earth precipitates were vaporized and were separated effectively. The separated salts were deposited in three positions of the vacuum distillation test apparatus or were collected in the filter and it is difficult to recover them. To resolve the problem, a vacuum distillation and condensation system, which is subjected to the force of a temperature gradient at a reduced pressure, was developed. In a preliminary test of the vacuum distillation/condensation recovery system, it was confirmed that it was possible to condense the vaporized salts only in the salt collector and to recover the condensed salts from the salt collector easily.

• Resources Recycling
• /
• v.24 no.2
• /
• pp.23-28
• /
• 2015

Most of the domestic need for tin rely on imports. In this work, a pyrometallurgical process was investigated to recover pure tin from the tin oxides in tin bath which results from the production of flat glass and LCD panel. From the results on the effect of reaction temperature, the highest recovery percentage of tin was obtained at $1350^{\circ}C$. The recovery percentage of tin was improved to 88% by employing the first and second smelting step. Electrorefining of the crude tin thus obtained led to pure tin with purity higher than 99.9%.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.46-49
• /
• 1998

1. 서론 및 이론적 배경 : 지구 온난화에 의한 생태계 변화의 위해 문제가 대두됨에 따라 온난화의 주요인인 이산화탄소를 발생원으로부터 분리, 회수하는 기술에 대한 관심이 고조되고 있다. 최근에는 이러한 기술 중에서 에너지가 적게 소요되며 환경 친화적인 분리막 공정에 의한 CO$_2$의 효율적인 분리, 회수법이 하나의 대안으로 연구되고 있다. 분리막 기술 중 함침액막법은 고분자막의 장점을 이용하면서도 투과도를 크게 향상시킬 수 있는 장점이 있어 최근에 액막을 이용한 CO$_2$/N$_2$혼합가스의 분리, 회수연구도 수행되고 있다. 순수한 물에 대한 CO$_2$의 용해도는 8x10$^{-6}$/cmHg이며, N$_2$는 1.55x10$^{-7}$/cmHg 로서 대략 50배 정도의 용해도 차를 보이고 있는데 이러한 물에 대한 기체의 높은 용해도 차를 이용하면 효과적으로 CO$_2$를 분리,회수할 수 있을 것으로 기대된다. 본 연구에서는 이러한 물을 함침한 액막을 이용하여 CO$_2$/N$_2$를 분리하였으며 혼합기체의 조성, 기체의 압력 등의 변수가 액막에 의한 CO$_2$의 분리에 미치는 영향을 조사하였다.

• Economic and Environmental Geology
• /
• v.49 no.1
• /
• pp.13-22
• /
• 2016

The objectives of this study were to recover silica and iron oxides and $CO_2$ sequestration using serpentine via various acid dissolution and pH swing processes. Serpentine collected from Guhang-myeon in S. Korea were mainly composed of antigorite and magnetite consisting of $SiO_2$ (45.3 wt.%), MgO (41.3 wt.%), $Fe_2O_3$ (12.2 wt.%). Serpentine pulverized ($${\leq_-}75{\mu}m$$) and then dissolved in 3 different acids, HCl, $H_2SO_4$, $HNO_3$. Residues treated with acidic solution were recovered from the solution (step 1). And then the residual solution containing dissolved serpentine was titrated using $NH_4OH$. And pH of the solution increased up to pH=8.6 to obtain reddish precipitates (step 2). After recovery of the precipitates, the residual solution reacted with $CO_2$ and then pH increased up to pH=9.5 to precipitate white materials (step 3). The mineralogical characteristics of the original sample and harvested precipitates were examined by XRD, and TEM-EDS analyses. ICP-AES analysis was also used to investigate solution chemistry. The dissolved ions were Mg, Si, and Fe. The antigorite became noncrystralline silica after acid treatment (step 1). The precipitate at pH=8.6 was mainly amorphous iron oxide, of which size ranged from 2 to 10 nm and mainly consisting of Fe, O, and Si (step 2). At pH=9.5, nesquehonite [$Mg(HCO_3)(OH){\cdot}2(H_2O)$] and lasfordite [$MgCO_3{\cdot}H_2O$] were formed after reaction with $CO_2$ (step 3). The size of carbonated minerals was ranged from 1 to $6{\mu}m$. These results indicated that the acid treatment of serpentine and pH swing processes for the serpentine can be used for synthesis of other materials such as silica, iron oxides and magnesium carbonate. Also, This process may be useful for the precursor synthesis and $CO_2$ sequestration via mineral carbonation.

• KAPE Magazine
• /
• no.9 s.145
• /
• pp.4-5
• /
• 2008

농림수산식품부는 수입 축산물의 유통흐름을 투명하게 파악하고 위해 축산물 회수 기반을 보다 확고하게 하기 위하여 식육가공.판매업체에 대해 판매처, 수입신고필증번호 등을 기재한 거래명세서 발급을 의무화하는 것을 주요내용으로 하는 "축산물가공처리법 시행규칙"을 지난 8월 14일 입법예고 하였다. 이에 둔갑판매 방지와 위해 축산물 회수 조치 기틀이 마련될 것으로 기대된다.

• Resources Recycling
• /
• v.25 no.4
• /
• pp.42-48
• /
• 2016

A research for the recovery of the metal with high purity from the waste tin plating solution was carried out. First, tin plating waste solution was tested to remove the organic substances and metallic impurities such as Fe, Zn, Na etc. using ion exchange resin having iminodiacetic functional groups (Lewatit TP 207). Second, the tin solution was purified to obtain the high purity tin solution using ion exchange resin having ethylhexyl-phosphate functional groups (Lewatit VPOC 1026). Finally, 99.98% of the high purity of tin metal can be recovered from the purified solution by cyclone type electrowinning method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.37-43
• /
• 2015

Evaporative cooling is a very effective way for exhaust heat recovery that uses both latent heat and sensible heat. This study investigated the performance of a heat recovery system using evaporative cooling. The experimental apparatus comprised a plastic heat exchanger, a water spray nozzle, an air blowing fan, a water circulation pump, and measuring sensors for the temperature, humidity, and flow rate. The effectiveness of the sensible heat recovery without evaporation was measured and compared with that of the total heat recovery with evaporation. The effectiveness of the sensible and total heat recoveries decreased as the air flow rate increased, and a much higher effectiveness was obtained with the counterflow arrangement in both cases. For total heat recovery, the effectiveness increased with the water flow rate, and the parallel flow arrangement was found to be more sensitive to the water flow rate than the counterflow arrangement.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.331-334
• /
• 2006

In this study, the ultra-fine fibers (UFs) having an alignment were prepared by electrospinning process, using different collectors made from various materials and collecting methods. A spinning solution was prepared by dissolving poly(amide-co-imide) (PAI) in NMP. The UFs were prepared by using various collectors and collecting methods, and the fibrous shapes were observed by SEM. As a result, a sort of materials of collectors and the collecting methods had not influenced on the average diameters of fibers but the forms of them. The just accumulated UFs on the collectors formed net structures, which had no alignment. On the contrary, the continuously collected UFs formed long fibers with alignment. It was found that the water collector played the roles of the fiber haul, temporary collector, moving path of fibers, and caused some friction between fibers and water, attributed to the formation of continuous UFs at a suitable collecting speed.