• Korean Journal of Animal Reproduction
• /
• v.20 no.4
• /
• pp.413-421
• /
• 1997

In vitro culture has provided new information on the mechanisms involved in fertilization how sperm and oocyte fuse together. At the same time, results obtained in vitro have led to new questions. Techniques for In vitro maturation of porcine oocytes have progressed such that the problem of the low rate of pronucleus formation with in vitro matured oocytes after in vitro fertilization has been nearly improved. On the other hand, porcine spermatozoa have been shown to be capacitated if the fertilization medium contains caffeine and Ca$^2+$, but the incidence of polyspermy in IVM-IVF oocytes is still high. To prevent polyspermy, co-culture with oviductal cells, sperm preincubation with porcine follicular fluid or control of sperm concentration, have been examined with significant effects but still remarkably high rates of polyspermy. The under standing of these influences is a prerequisite to enhancing in vitro production of porcine em bryos.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.288-288
• /
• 2011

최근 Charge Trap Flash (CTF) Non-Volatile Memory (NVM) 소자가 30 nm node 이하로 보고 되면서, 고집적화 플래시 메모리 소자로 각광 받고 있다. 기존의 CTF NVM 소자의 tunnel layer로 쓰이는 SiO2는 성장의 용이성과 Si 기판과의 계면특성, 낮은 누설전류와 같은 장점을 지니고 있다. 하지만 단일층의 SiO2를 tunnel layer로 사용하는 기존의 Non-Valatile Memory (NVM)는 두께가 5 nm 이하에서 direct tunneling과 Stress Induced Leakage Current (SILC) 등의 효과로 인해 게이트 누설 전류가 증가하여 메모리 보존특성의 감소와 같은 신뢰성 저하에 문제점을 지니고 있다. 이를 극복하기 위한 방안으로, 최근 CTF NVM 소자의 Tunnel Barrier Engineered (TBE) 기술이 많이 접목되고 있는 상황이다. TBE 기술은 SiO2 단일층 대신에 서로 다른 유전율을 가지는 절연막을 적층시킴으로서 전계에 대한 민감도를 높여 메모리 소자의 쓰기/지우기 동작 특성과 보존특성을 동시에 개선하는 방법이다. 또한 터널링 절연막으로 유전률이 큰 High-K 물질을 이용하면 물리적인 두께를 증가시킴으로서 누설 전류를 줄이고, 단위 면적당 gate capacitance값을 늘릴 수 있어 메모리 소자의 동작 특성을 개선할 수 있다. 본 연구에서는 CTF NVM 소자의 trap layer로 쓰이는 HfO2의 두께를 5 nm, blocking layer의 역할을 하는 Al2O3의 두께를 12 nm로 하고, tunnel layer로 Si3N4막 위에 유전율과 Energy BandGap이 유사한 HfAlO와 ZrO2를 적층하여 Program/Erase Speed, Retention, Endurance를 측정을 통해 메모리 소자로서의 특성을 비교 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.198-198
• /
• 2011

단분산 결정질 실리콘 나노입자 (<10 nm)는 양자점 효과로 인한 선택적 파장 흡수가 가능하므로 태양전지 분야에 응용 가능성이 크다. 특히 입경의 크기가 작아지면 부피대비 표면적이 넓어지기 때문에 태양빛 흡수 면적이 증가한다. 따라서 입자의 크기는 태양전지에서 효율을 결정하는 중요한 요소 중 하나이다. 이러한 이유에서 plasma arc synthesis, laser ablation, pyrolysis 그리고 PECVD (Plasma Enhanced Chemical Vapor Deposition) 등이 실리콘 나노입자를 합성하는데 연구되어 왔으며, 특히 PECVD는 입자 생성과 동시에 균일한 증착이 이루어질 수 있기 때문에 태양전지 제작 시 공정 효율을 높일 수 있다. PECVD를 이용한 나노입자 합성에서 입경을 제어하는데 중요한 전구물질은 Ar과 SiH4가스이다. Ar 가스는 ICP (Inductively Coupled Plasma) 챔버 내부에 가해준 전력을 통해 가속됨으로써 분해되어 Ar plasma가 생성된다. 이는 공급되는 SiH4가스를 분해시켜 핵생성을 유도하고, 그 주위로 성장시킴으로써 실리콘 나노입자가 합성된다. 이때 중요한 변수 중 하나는 핵생성과 입자성장시간의 조절을 통한 입경제어 이다. 또한 공급되는 가스의 유량은 입자가 생성될 때 필요한 화학적 구성비를 결정하므로 입경에 중요한 요소가 된다. 마지막으로 공정압력은 챔버내부의 plasma 구성 요소들의 평균 자유 행로를 결정하여 SiH4가 분해되어 입자가 생성되는 속도와 양을 제어한다. PECVD를 이용한 실리콘 나노입자 형성의 주요 변수는 RF pulse, 가스(Ar, SiH4, H2)의 유량, Plasma power, 공정압력 등이 있다. 본 연구에서는 RF (Radio Frequency) PECVD방법을 이용하여 실리콘 나노입자를 만드는데 필요한 여러 변수들을 제어함으로써 이에 따른 입경분포 차이를 연구하였다. 또한 SEM (Scanning Electron Microscopy)과 SMPS (Scanning Mobility Particle Sizer)를 이용하여 각 변수에 따라 생성된 나노입자의 입경과 농도를 분석하였다. 이 중 plasma power에 따른 입경분포 측정 결과 600W에서 합성된 실리콘 나노입자가 상당히 단분산 된 형태로 나타남을 확인할 수 있었고 향후 다른 변수의 제어, 특히 DC bias 전압과 열을 가함으로써 나노입자의 결정성을 확인하는 추가 연구를 통해 태양전지 제작에 응용 할 수 있을 것으로 예상된다.

• Environmental and Resource Economics Review
• /
• v.26 no.3
• /
• pp.287-317
• /
• 2017

Asbestos has been actively used for various places. Since it was designated as the first grade carcinogen in the 1970s, strict regulations on using asbestos has been implemented globally. Considering long-term latent periods between asbestos exposure and environmental diseases, we analyze the time lag between asbestos consumption and the incidence of mesothelioma in Korea and estimate the long-run relationship. In addition, we conduct a comparative analysis on the effectiveness of asbestos regulations in the United Kingdom and the United States, which have accumulated long-term time-series observations. The latent period analysis indicates that the consumption of asbestos and the incidence of the disease are highly correlated in all three countries, being long-term lags of more than 30 years. Also, we find a long-run equilibrium relationship between asbestos consumption and the incidence of mesothelioma in the presence of long-term lags between the variables in all three countries. Furthermore, using a distributed lag model, asbestos consumption has statistically significant positive effects on mesothelioma with a long-term lag.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.32-43
• /
• 2023

Resistive Random Access Memory (RRAM), based on resistive switching characteristics, is emerging as a next-generation memory device capable of efficiently processing large amounts of data through its fast operation speed, simple device structure, and high-density implementation. Interface type resistive switching offer the advantage of low operation currents without the need for a forming process. Especially, for RRAM devices based on transition metal oxides, various studies are underway to enhance the memory characteristics, including precise material composition control and improving the reliability and stability of the device. In this paper, we introduce various methods, such as doping of heterogeneous elements, formation of multilayer films, chemical composition adjustment, and surface treatment to prevent degradation of interface type resistive switching properties and enhance the device characteristics. Through these approaches, we propose the feasibility of implementing high-efficient next-generation non-volatile memory devices based on improved resistive switching properties.

• Journal of Life Science
• /
• v.16 no.6
• /
• pp.984-988
• /
• 2006

Lipopolysaccharide(LPS) was posttreated after the 14 day-pretreatment of Ulva lactuca fractions(ULF), and their correlativity to enzymatic activity alteration was investigated in the liver of rats. ULF was intraperitoneally administered into rats at dose of $1m{\ell}/kg$ of 100 mg/kg concentration for 14 days. On the day 15, $1m{\ell}/kg$ of LPS was injected. The corelativity was examined by measuring the changed values of superoxide dismutase(SOD) in mitochondrial fraction and catalase(CAT), glutathione peroxidase(GPx) in liver homogenate. The results showed that LPS treatment decreased the high values of SOD, CAT, GPx to the low values, but ULF pretreatment increased the low values of SOD, CAT, GPx to the high values. It was suggested that ULF, LPS and antioxidative enzymes like SOD, CAT, GPx had the corelativity of the high-low-high pattern and that the ULF pretreatment played the proper preventive role in the protection against the LPS treatment-induced enzymatic inactivity in the water fraction.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.702-707
• /
• 2012

During the last few decades, toxic chemicals used in various industries have caused global pollution and the side products such as carbon dioxide and methane gas have contributed to global warming. Thus, it is desirable to develop new alternative solvents. It is well known that ionic liquids display a variety of environmentally friendly physical properties: nonvolatile, nonflammable, wide electrochemical windows, high inherent conductivities, wide thermal operating ranges, chemically inert, and limited miscibilities with organic solvents. Because of these characteristics, ionic liquids are promising candidates as solvents for synthetic chemistries, catalysis, and gas separations. In this study, we synthesized morpholiunium salts as N-ethyl-N-methylmorpholine Bromide, N-butyl-N-methylmorpholine Bromide, N-octyl-N-methylmorpholine Bromide, N-ethyl-N-methylmorpholine Tetrafluoroborate, N-butyl-N-methylmorpholine Tetrafluoroborate, N-octyl-N-methylmorpholine Tetrafluoroborate, N-ethyl-N-methylmorpholine Hexafluorophosphate, N-butyl-N-methylmorpholine Hexafluorophosphate, and N-octyl-N-methylmorpholine Hexafluorophosphate. The melting points, decomposition temperatures and electrochemical stabilities of the salts were measured by DSC, TGA, and CV, respectively. The salts with halide anion showed high melting points ($150{\sim}200^{\circ}C$), low decomposition temperatures ($200{\sim}230^{\circ}C$), narrow electrochemical stabilities (3.4~3.6 V). The synthesized salts with inorganic anions, on the other hand, presented low melting point ($50{\sim}110^{\circ}C$), high decomposition temperatures ($250{\sim}380^{\circ}C$), wide electrochemical stabilities (6.1~6.3 V). We also found that the properties depend on the length of the carbon chain.

• Korean Journal of Mineralogy and Petrology
• /
• v.37 no.2
• /
• pp.67-76
• /
• 2024

In light of the development of modern high-tech industries, where human sustainability is becoming increasingly important, anorthosite needs to be reevaluated not only for its potential as a new source of aluminum, but also as a primary resource with a wide range of industrial applications. In particular, a relatively simple chemical composition with a high CaO content and Al₂O₃/SiO₂ ratio, along with its relatively low impurity levels and chemically stable nature offers significant advantages in industrial processes. Thus, anorthosite is considered as an important industrial resource in the age of energy transition. In this review, we examine the mineralogical and geochemical characteristics of anorthosite that determines their stability and reactivity. Based on their characteristics, we propose the potential use of utilizing the anorthosite as an alternative to the Bayer process which has the limitations. We also explore its application as the eco-friendly geo-synthetic materials, and as the new materials for carbon dioxide storage and utilization. As the demand for aluminum applications accelerates, anorthosite is gaining their importance in the geological industry and clean energy field. Therefore, advanced and extensive research on anorthosite complex occurring in the Hadong and Sancheong regions of Korea is critical to obtain opportunities to enhance economic advantages through efficient utilization of national resources and to lead to sustainable development.

• Membrane Journal
• /
• v.20 no.4
• /
• pp.312-319
• /
• 2010

Carbon membrane materials have received considerable attention for the gas separation including hydrocarbon mixture of ingredients of the volatile organic compounds(VOCs) because they possess their higher selectivity, permeability, and thermal stability than the polymeric membranes. The use of activated carbon membranes makes it possible to separate continuously the VOCs mixture by the selective adsorption-diffusion mechanism which the condensable components are preferentially adsorbed in to the micropores of the membrane. The activated carbon hollow fiber membranes with uniform adsorptive micropores on the wall of open pores and the surface of the membranes have been fabricated by the carbonization of a thin film of phenolic resin deposited on porous alumina hollow fiber membrane. Oxidation, carbonization, and activation processing variables were controlled under different conditions in order to improve the separation characteristics of the activated carbon membrane. Properties of activated carbon hollow fiber membranes and the characterization of a gas permeation by pyrolysis conditions were studied. As the result, the activated carbon hollow fiber membranes with good separation capabilities by the molecular size mechanism as well as selective adsorption on the pores surface followed by surface diffusion effective in the recovery hydrocarbons have been obtained. Therefore, these activated carbon membranes prepared in this study are shown as promising candidate membrane for separation of VOCs.

• Korean Journal of Food Science and Technology
• /
• v.25 no.4
• /
• pp.379-385
• /
• 1993

Antioxidative effectiveness and oxidized products in mixture of methyl linoleate(ML) and phenolic compounds were investigated under oxygen blowing at $37^{\circ}C$ for 9 days. Caffeic acid (3,4-dihydroxy cinnamate ; CML) and phloroglucinol(1,3,5-trihydroxy benzene ; PML) showed higher antioxidative effectiveness for methyl linoleate than 0.05% ${\alpha}-tocopherol$ (TML). Oxidized products in ML group were methyl 8-(2-furyl)-octanoate, 9,13-trans, cis hydroperoxide isomer, 9,13-trans, trans hydroperoxide isomer, and 9-TMSO-12,13-epoxy-10-octadecenoate. In CML group the oxidized products were methyl-8-(2-furyl)-octanoate, 9-trans, cis hydroperoxide isomer and 9-trans, trans hydroperoxide isomer, but 13-hydroxy isomer was not identified. It was shown that CML were oxidized more slowly than ML group and at 6th day of oxidation, caffeic quinone was found to be major oxidized product of caffeic acid. Oxidixed Products in PML group were methyl-8-(2-furyl)-octanoate, 9-trans, cis hydroperoxide isomer, and 9-trans, trans hydroperoxide isomer but phloroglucinol was not oxidized even at the 9th day of reaction.