• Membrane Journal
• /
• v.1 no.1
• /
• pp.78-95
• /
• 1991

Water factory 21(WF 2) in Orange County California, is a advanced wastewater treatment(AWT) plant designed to reclaim biologically treated munidpal wastewater for injection into a seawater barrier system. Processes included are lime treatment air stripping, filtration, activated carbon adsorption, reverse osmosis(RO), and chlorination. The effectiveness of each treatment process is presented including pretreatment, RO dimineralization. The data collected show that the processes, including RO, used at WF-21 are capable of producing a very high quality water on a reliable basis. Treatment reduced all contaminants, to levels below national primary drinldng water regulation maximum contaminant levels. It was found that lime clarified secondary effluent can be used as feedwater to a RO dimineralizer. Experiments with new low pressure membrane(250psi) show great potential for reducing RO cost.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.143-149
• /
• 2016

Purpose: This study is to analyze the characteristics of energy usage in apartment houses that had built for 20 years recently in capital area and the correlation between the characteristics of energy usage and the regulation of energy efficiency in building. Method: It is investigated 264 apartment sites having been built since 1991 where 312,071 houses live. The sites were listed on Naver map. Quantities of energy usages in the sites were searched in a portal, Green Together being operated by the Ministry of Land, Infrastructure and Transport. The appraisal report of building energy in the portal is recording usage quantity of gas energy, district cooling & heating energy, electric energy, total energy, 1st gas energy, 1st district cooling & heating energy, 1st electric energy, 1st total energy, etc. Result: Analyzing the average of total energy usage from 1991 to 2012, the average in 2001, 2008 each was reduced more than 10 percent compared to the previous year. It was analyzed that the reduction was relevant to building energy-saving design criterion which have been tightened more than before.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.6
• /
• pp.7-14
• /
• 2011

Various sizes of hydrazine monopropellant thruster have been used on satellite and space launcher vehicle. The test and handling procedure of hydrazine monopropellant thruster are usually difficult because of the toxicity of hydrazine and its decomposition product gases. Therefore, the numerical analysis can help understand the effects of various design parameters and can reduce the time as well as expenses. In this study, the numerical analysis is performed by modelling the catalyst bed as one dimensional porous medium. Thereby, resulting physical phenomena are examined by considering the variation of catalyst bed characteristics incurred by catalyst granule failure.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1989.06a
• /
• pp.22-28
• /
• 1989

유압베인펌프는 토출유량이 많고 소형으로 동력밀도는 높으나 토출압력면에스는 피스톤식 펌프에 뒤지기 때문에 발생압력의 고압화에 대한 연구가 계속되어 왔다. 유압장치의 경제적인 압력으로서 $300kgf/cm^2$가 제시되어 있는 가운데, 유압베인펌프의 고압화의 연구가 진행중에 있는 점, 또한 최근들어 에너지 절약의 일환으로 펌프의 수명연장 문제가 거론되어 지고 있는 점, 물에 타기 어려운 난연성유압 작동유를 사용할 경우 마찰증대 및 마모성능이 저하하는 점 등의 이유에서 유압베인 펌프의 마찰, 윤활문제가 중요시 되어지고 있다. 특히 펌프의 체적효율을 높이는 것과 마찰, 마모를 저하시키는 것과는 서로 상반된 관계에 놓여있기 때문에 문제의 해결에 어려움을 갖고 있다. 이와같은 모순을 해결하기 위해서는 베인과 캠링사이의 슬라이딩부분의 윤활상태를 파악하지 않으면 안된다. 그러나 베인의 선단부에는 10-20ms의 짧은 시간동안에 수백기압의 압력이 변화하기 때문에 지금까지 확실한 작용력의 파악이 어려워 이 분야의 윤활상태 파악에 관한 연구는 거의 이루어지지 않고 있다. 베인과 캠링간의 윤활상태를 윤활공학적 관점에서 보면 변동하중 상태에서의 슬라이딩 탄성유체윤활상태 또는 혼합윤활상태에 있는 것으로 판단되어지는데, 이와같은 여러가지 어려운 조건 때문에 윤활상태를 파악하는데, 어려운점이 뒤따르게 된다. 위와 같은 배경에 착안하여 본 연구에서는 유압베인펌프를 모델화하여 변동하중상태에서 실험이 가능한 장치를 제작, 사용하여 베인 선단 슬라이딩부분의 윤활상태를 파악하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.6
• /
• pp.946-953
• /
• 2012

When water shortage has been getting worse recently, toilet water-saving is one of the most effective way to solve the water shortage. Therefore, in this study, toilet flushing performance was investigated with VOF(Volume Of Fluid) model to obtain the basic design data for the development of high-efficiency toilets. The result showed that the shorter trapway, the longer the flushing duration time. However, the shorter trapway is found to have disadvantage in exhausting dirt due to relatively weak siphon and higher curvature. Since the remaining water in a trapway appears to help siphon, it is also an important factor in developing high-efficiency toilets. Although higher water level in the water tank shows better performance in flushing, lower water level is preferred to save water. Too low water level may cause dirt to clog the trapway due to relatively weak siphon.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.1
• /
• pp.23-30
• /
• 2011

International cooperation to reduce greenhouse gas emissions is expected to provide a big crisis and a great opportunity at the same time for our industry that heavily consumes energy. To cope actively with the international environmental regulation, such as the Framework Convention on Climate Change, quantitative measurement of the volume of greenhouse gases emitted by various industries and quantitative prediction of the greenhouse gas emissions of the future are becoming more important than anything else at the national level. This study aims to propose the calculation process of carbon dioxide($CO_2$) emission for building in life cycle. This paper describes and compares 9 different tool for environmental load estimation with LCA. This study proposed the calculation process for quantitatively predicting and assessing $CO_2$ emissions during the life cycle of buildings based on the life cycle assessment(LCA). The life cycle steps of buildings were divided into the design/supervision, new construction, repair, renovation, use of operating energy in buildings, maintenance, and reconstruction stage in the life cycle inventory analysis and the method of assessing the environmental load in each stage was proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4108-4114
• /
• 2010

The automation of the machining and manufacturing process of press die is designed to shorten the working time by avoiding unnecessary repetitive works and to obtain subject articles with standard quality. Automation as used in this paper includes 3-D die design, machining center, wire-cut electrical discharge machining, and drawing works. This paper deals with research work on the automation of the machining and manufacturing process of the press die after 3-D die design using the Irp bracket for the control box sensor. The research was conducted under the same setting as that of die design.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.3
• /
• pp.1-11
• /
• 2014

The Korean government plans to introduce the building energy performance standard which regulates the annual energy consumption of buildings. This paper aimed to set up the reference building from database based on the building design trends for non-residential buildings. We surveyed the design data of 435 non-residential buildings which were granted building permission from 2007 to 2011. And we conducted estimation on the heating & cooling load and the energy consumption of the reference building using ECO2 program. From results, the reference building of non-residential buildings was office building which had a total 7 floors and $20,838m^2$ gross floor area. And it suggests the design reference data of building envelope, HAVC, heat source equipment and lighting system for the reference building. The total annual energy use of the reference building was $151.9kWh/m^2yr$.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.959-964
• /
• 2006

Recently, an international oil price shows fluctuation in 70 dollars per barrel and it is said that this trend is able to continues for much longer. Because energy consumption in buildings accounted for about 25% of the nation's total demand for energy, Energy censervation and efficiency of buildings were very important issues. Main political measures relating to building energy use and saving were 'the system of accrediting green building', 'building energy certification system', 'energy consumption efficiency rating indication system', 'building energy code', 'high efficient energy materials certification system'. This paper presents approaches to improve building energy efficiency policy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.379-382
• /
• 2009

As IT becomes leading part of futurity industry, issue about Green IT is being on the increase and resources recycling, toxicity water use resection, saveenergy etc. are emphasized. Fundamental purpose for Neteuwokeusiseutem's Green IT realization that is constructed on ship studied about network security system that can control access that use resources as efficient and safe and is enemy of evil which can give subordinate of system for this and resect unnecessary hardware waste by back more.