• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1000-1005
• /
• 2010

국내에 대표적인 표면파 탐사법인 MASW, SASW, HWAW를 비교한 결과에 따르면, 세기법들의 결과가 매우 유사하게 도출되는 것을 확인할 수 있었으나, 각 현장별로 획득한 탐사심도의 차이가 존재하였다. 넓은 시험 측선을 필요로 하는 SASW 및 MASW 기법의 경우 현장 상황 및 조건에 따라 15m 정도의 얕은 심도의 물성만을 획득하였다. 표면파 기법은 토사층에서는 매우 신뢰성있는 결과를 도출하였으며 2차원 영상화를 통한 넓은 영역의 물성치를 빠르고 경제적으로 획득할 수 있는 장점이 있다. 현재 지반조사 시 소수의 시추자료를 이용하여 부지의 특성을 파악하기 때문에 시추공간 물성치 및 지반구조에 대해서 확실한 파악이 이뤄지지 않고 있기 때문에 표면파 기법은 토사층의 물성산출 뿐만 아니라 시추공탐사법을 보완하여 시추공간 물성변화를 파악하는 유용한 시험법이라고 판단된다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.361-365
• /
• 2002

최근 고감성 PET 사를 이용하여 생산한 PET 직물은 고감성 의류용 직물로서 많이 사용되고 있다. 이러한 고감성 의류용 PET 직물은 다양한 공정을 거치면서 장력이나 열 등의 영향을 받으므로서 사의 물성의 변화를 초래하여 감성 의류용도의 PET 직물에 많은 결점을 유발 시키므로서 직물 생산 시 공정조건 설정 등의 어려움에 직면하고 있다. 이러한 고감성 의류에 치명적인 문제를 유발하는 문제점에 관한 감성사 제조 시의 공정조건 변화와 관련된 연구 논문은 많이 발표가 되지 못하고 있다. 따라서 본 연구에서는 국내 7개 원사 Maker의 Denier 별 PET 사의 물성을 균일한 길이의 Layer를 설정하여 분석, 조사하고 Layer 별 물성 차이와 습ㆍ건열 열처리 온도에 따른 사의 수축률 등을 비교하므로서 감성 의류용 직물 생산에 필요한 기초 물성 Data를 제공하고 PET 사의 품질향상을 도모하므로서 최종 감성 의류용 직물 소재 개발에 기여할 수 있는 기초자료를 제공하고자 한다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.125-130
• /
• 2008

Electrical resistivity and seismic refraction surveys were conducted to investigate geologic structures and geotechnical characteristics of the subsurface in Dok-do island, along with rock physical properties. The resistivity results in Seo-do island show that the fault adjacent to the fisherman's shelter is a normal fault and extended towards the NW direction. Bedded Rapilli Tuff in the downstream was more severely influenced in depth by weathering and erosion than Trachy Andesite II in the upstream area. The physical properties of the rocks illustrate that Trachyte and Trachy Andesite are hardest, Massive Tuff Breccia is next, and Tuffs are the most soft rocks in Dok-do island.

• Korean Journal of Food Science and Technology
• /
• v.16 no.3
• /
• pp.303-308
• /
• 1984

Instrumental and sensory characteristics of chewing gums were measured at each masticatory stage, and the correlations between the characteristics were analyzed. In instrumental characteristics, similarities were proved between initial puncture work and puncture force, intermediate hardness and penetration work, final hardness and penetration work, and adhesion work and adhesion force. Final hardness correlated highly with yield force and the slope of force-distance curve of penetration test, and the slope also correlated significantly with springiness and adhesion force. In sensory characteristics, the correlations of the same parameter between trained panel and consumer were extremely high. Initial stiffness correlated significantly with both intermediate and final firmness by consumer. Highly significant correlations were obtained between final firmness and stiffness and between lift and cohesion by trained panel, whereas firmness correlated with adhesion negatively.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.79-85
• /
• 2001

It goes to be serious with environmental pollution cause waste rubber. That is why there are lot of studies for efficient recycle. The purpose of this study is to improve the physical properties of EPDM powder by using De-link system. We changed on the size of waste rubber powder and De-link contents. we examined the physical, rheological, mechanical properties. And also examined cross-link state at various De-link. Also we carried out morphological studies after making the weather strip's feature by optical microscope.

• Tunnel and Underground Space
• /
• v.15 no.2 s.55
• /
• pp.129-136
• /
• 2005

This paper describes the implementation of rock mass rating evaluation based on genetic algorithm(GA) and conditional simulation technique to estimate RMR in the area without sufficient borehole data RMR were estimated by GA and conditional simulation technique with reflecting distribution feature and spatial correlation. And RMR determined by GA were compared with the results from kriging. Through the analysis of the results from 30 simulations, the uncertainty of estimation could be quantified.

• Tunnel and Underground Space
• /
• v.21 no.6
• /
• pp.480-493
• /
• 2011

Dynamic rock property is one of most important parameters in design of earthquake-resistant structures. In this study, free-free resonant column test has been conducted to obtain dynamic Young's modulus, dynamic shear modulus, and damping ratio among dynamic properties with granite specimen of Chungnam Yeongi area. The dynamic properties obtained from this test were compared with the physical properties from static rock tests, and their relationship has been analyzed. From our study, it has been concluded that the dynamic Young's modulus and the dynamic shear modulus are linearly proportional to the elastic wave velocity. And also the damping ratio has been identified to be in non-linear inverse proportion to the elastic wave velocity.

• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.463-468
• /
• 2010

The polycarboxylic (PC) type concrete superplasticizer was synthesized. The effects of ethylene oxide group number and its molecular weight on the properties of the polycarboxylic type concrete superplasticizer and the concrete motar properties were studied. To investigated of the interfacial properties of the premixed-concrete with the superplasticizer, the type and the amount of polyethylene glycol, meta acrylate added, and type of the initialization agent were studied. Also the interfacial properties of the superplasticizer aqueous phase, the wettability on the cement particle, the fluidity of the cement mortar, and the strength properties of the concrete were measured. For a high fluidity of the cement mortar and a high strength of concrete, a low value of the surface tension and contact angle were required for PC. To have a good performance for PC, the reaction condition of 1.3 mol ratio of MA against to MPEG was suitable with KSP initiator.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.217-222
• /
• 2010

Paved roads are suffered from the permanent plastic deformation in hot summer and cracks in cold winter, which are detrimental to safe driving. This leads to necessity of modification of asphalt to resist those deformation. In this study, two kinds of modifiers were examined; organic polymers and a photoinitiator which is activated by ultraviolet lay. The mechanical and rheololgical properties of modified asphalts were examined using UTM and rheometer. Results showed that the properties were varied depending on the types of polymer and irradiation time. UV irradiation increased the tensile strength and storage modulus of thermoplastic polymer-modified asphalt, however UV was not effective on thermoset polymer. According to long term ultraviolet curing test, properties of the polymer/photoinitiator-modified asphalt did not decrease, but rather increase for 20 years. This indicates that the useful life of the asphalt could be extended by addition of photoinitiator.

• The Journal of the Korea Contents Association
• /
• v.3 no.2
• /
• pp.87-95
• /
• 2003

Prompt and efficient information collection on each research area is emerging as the key factor of national technology competitiveness in industrialized society. Accordingly, constructing a variety of specialized DBs as the tool for supporting R&D activities and providing appropriate information are essential task to be solved in promoting R&D productivity. On this study, We have developed ceramics material property DB to support and facilitate R&D activities of industry, academia and research institutes. The ceramic property DB which was regarded as the most important DB surveyed from korean done for scientists and researchers was selected. To develop this DB, us have designed DB customized for domestic users after analyzing items and structures of ceramic material property information. We hope that R&D researchers can save time and cost in acquiring property information and the R&D productivity will be improved by utilizing our research result.