• Science of Emotion and Sensibility
• /
• v.17 no.2
• /
• pp.91-100
• /
• 2014

This study was to examine how visual angle of matrix corresponding to the physical properties of P300 speller and eye gaze corresponding to the user's personal characteristics influence on the accuracy of P300. Visual angle of the matrix was operated as the distance between the user and the matrix and three groups were composed: 60 cm group, 100 cm groups, and 150 cm group. Eye gaze methods was consisted three conditions. Head moving condition was putting eye gaze using head, pupil moving condition was moving pupil with the head fixed, while the eye fixed condition is to fix the eye gaze at the center of the matrix. The results showed that there was significant difference in the accuracy of P300 speller according to the eye gaze method. The accuracy of the head moving condition was higher than the accuracy of pupil moving conditions, accuracy of pupil moving conditions was higher than the accuracy of the eye fixed conditions. However, the effect of visual angle of matrix and interaction effect were not significant. When P300 amplitude of target character was measured depending on how you stare at the target character, P300 amplitude of the head moving condition was greater than P300 amplitude of the pupil moving condition. There was no significant difference in the error distribution in head moving condition and pupil moving condition, while there was a significant difference between two eye gaze conditions and fixed gaze condition. The error was located at the neighboring characters of the target character in head moving condition and pupil moving condition, while the error was relatively distributed widely in fixed eye condition, error was occurred with high rate in characters far away from the center of matrix.

• Korean Security Journal
• /
• no.37
• /
• pp.221-246
• /
• 2013

The purpose of this research is to analyze authority and expertise of internally-selected Director of Presidential Security Service (PSS) through case-studies of the 9th Director of PSS Sang-Bum Park and the 13th Director of PSS Sang-Kuk Yeom, and to provide suggestions as to how to improve the expertise of PSS director and how to make PSS more trusted by the president and citizens. To do so, this study employs qualitative research on various references while acquiring testimonies from an expert group. The result of the research is as follows. First, the 9th Director of PSS Sang-Bum Park and the 13th Director of PSS Sang-Kuk Yeom are categorized as non-authoritative Director of Presidential Security Service. Second the 9th Director of PSS Sang-Bum Park and the 13th Director of PSS Sang-Kuk Yeom are categorized as expert-type Director of Presidential Security Service. It must be acknowledged that the authority of PSS directors does not come from close relationship with president or physical distance, but from legality and professionalism. Therefore, when appointing a person who is in charge of his/her own safety, the president must consider national security and professionalism in order to succeed as a ready president.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.469-478
• /
• 2016

This Study aims to examine the differences in stress arising from clinical fieldwork of some of the students of occupational therapy department in accordance with the DISC behavioral style and the differences in the coping strategy. It is to provide basic data for the presentation of means of coping with stress that can occur at the time of clinical fieldwork in accordance with the behavioral styles of the students. As the results of the study, it was found that there are differences in the detailed items of clinical fieldwork stress in accordance with the DISC behavioral styles and differences in the strategy for copying with stress in accordance with the DISC behavioral styles. Therefore, there is a need to develop manual for fieldwork instructions and consultations in order for the students of occupational therapy department to cope with the clinical fieldwork stress at the time of clinical fieldwork by considering the behavioral styles of the students through additional researches in the future on the basis of aforementioned results of the study.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.5
• /
• pp.901-909
• /
• 2021

Since mobile devices have limited computational resources, it tends to use the cloud to compute or store data. As real-time becomes more important due to 5G, many studies have been conducted on edge clouds that computes at locations closer to users than central clouds. The farther the user's physical distance from the edge cloud connected to base station is, the slower the network transmits. So applications should be migrated and re-run to nearby edge cloud for smooth service use. We run applications in docker containers, which is independent of the host operating system and has a relatively light images size compared to the virtual machine. Existing migration studies have been experimented by using network simulators. It uses fixed values, so it is different from the results in the real-world environment. In addition, the method of migrating images through shared storage was used, which poses a risk of packet content exposure. In this paper, Containers are migrated with Secure CoPy(SCP) method, a data encryption transmission, by establishing an edge computing environment in a real-world environment. It compares migration time with Network File System, one of the shared storage methods, and analyzes network packets to verify safety.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.4-7
• /
• 2022

Recently, multi-view depth estimation methods using deep learning network for the 3D scene reconstruction have gained lots of attention. Multi-view video contents have various characteristics according to their camera composition, environment, and setting. It is important to understand these characteristics and apply the proper depth estimation methods for high-quality 3D reconstruction tasks. The camera setting represents the physical distance which is called baseline, between each camera viewpoint. Our proposed methods focus on deciding the appropriate depth estimation methodologies according to the characteristics of multi-view video contents. Some limitations were found from the empirical results when the existing multi-view depth estimation methods were applied to a divergent or large baseline dataset. Therefore, we verified the necessity of obtaining the proper number of source views and the application of the source view selection algorithm suitable for each dataset's capturing environment. In conclusion, when implementing a deep learning-based depth estimation network for 3D scene reconstruction, the results of this study can be used as a guideline for finding adaptive depth estimation methods.

• Land and Housing Review
• /
• v.15 no.2
• /
• pp.73-87
• /
• 2024

To evaluate the efficiency of commuting patterns, various commuting indicators such as excess commute and commuting potential utilized have been developed and used. It is crucial to calculate these indicators reasonably to reveal the differences in commuting patterns among metropolitan areas and to consider these in the process of formulating commuting policies. However, commuting indicators are generally calculated at the administrative district level, and thus, they are not free from the problem of the modifiable areal unit problem (MAUP). This issue can undermine the rationality of comparing commuting efficiency between metropolitan areas, making it necessary to handle the calculation of commuting indicators carefully. Therefore, this study utilises Monte Carlo Simulation to calculate optimal, actual, and maximum commuting distances, and thereby presents the excess commute and the commuting potential utilized. To apply Monte Carlo Simulation to the context of South Korea, a constrained Monte Carlo Simulation is conducted, where residential and workplace locations used in the simulation are selected based on the actual locations of buildings. The analysis is conducted on 13 metropolitan areas with established metropolitan plans using the 2016 Household Travel Survey data. The commuting indicators calculated through the simulation showed minimal differences compared to the results obtained through conventional methods. The comparison of commuting efficiency among metropolitan areas revealed that even if the degree of spafial balance between residential and workplace locations is similar, the actual commuting patterns can differ significantly. It is suggested that further research considering characteristics such as the area of each metropolitan region will be necessary in the future.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2000.09a
• /
• pp.54-69
• /
• 2000

There are groundwater trouble by high-salinity yield inducing sea-water intrusion in Cheju Island. It is used groundwater-GIS(Well-lnfo) in the maintenance and management of groundwater in Cheju Island to grasp groundwater trouble area and cause of high-salinity yield. For 16 wells certain to yield high-salinity, we logged specific electrical conductivity(EC) and tried to get hold of freshwater and saltwater relationship. As result of distribution of $Cl^-$ by depth, it is showed up groundwater trouble by high-salinity yield in the east coastal area and the partly north coastal area. The reason of high-salinity groundwater yield are low-groundwater level by the structure of geology and low-hydraulic gradient etc. There is necessity for management to development and use of groundwater in the high-salinity area, special management area.

• Geophysics and Geophysical Exploration
• /
• v.10 no.3
• /
• pp.191-202
• /
• 2007

To identify the detailed attenuation structure in the southern Korean Peninsula, a numerical test was conducted for the Q tomography inversion to be applied to the accumulated dataset until 2005. In particular, the stochastic pointsource ground-motion model (STGM model; Boore, 2003) was adopted for the 2D Q tomography inversion for direct application to simulating the strong ground-motion. Simultaneous inversion of the STGM model parameters with a regional single Q model was performed to evaluate the source and site effects which were necessary to generate an artificial dataset for the numerical test. The artificial dataset consists of simulated Fourier spectra that resemble the real data in the magnitude-distance-frequency-error distribution except replacement of the regional single Q model with a checkerboard type of high and low values of laterally varying Q models. The total number of Q blocks used for the checkerboard test was 75 (grid size of $35{\times}44km^2$ for Q blocks); Q functional form of $Q_0f^{\eta}$ ($Q_0$=100 or 500, 0.0 < ${\eta}$ < 1.0) was assigned to each Q block for the checkerboard test. The checkerboard test has been implemented in three steps. At the first step, the initial values of Q-values for 75 blocks were estimated. At the second step, the site amplification function was estimated by using the initial guess of A(f) which is the mean site amplification functions (Yun and Suh, 2007) for the site class. The last step is to invert the tomographic Q-values of 75 blocks based on the results of the first and second steps. As a result of the checkerboard test, it was demonstrated that Q-values could be robustly estimated by using the 2D Q tomography inversion method even in the presence of perturbed source and site effects from the true input model.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.89-97
• /
• 2007

A three-dimensional (3D) magnetotelluric (MT) survey has been carried out to delineate subsurface structures and possible fractures, for development of low-temperature geothermal resources in Pohang, Korea. Quite good quality MT data could be obtained throughout the survey region by locating the remote reference in Kyushu, Japan, which is ${\sim}480\;km$ from the centre of the field site. 3D modelling and inversion are performed taking into account the sea effect in MT measurements near the seashore. The nearby sea in the Pohang area affects MT data at frequencies below $1\;Hz{\sim}0.2\;Hz$, depending on the distance from the seashore. The most severe sea effects were observed in the south-east parts of the survey area, closer to Youngil Bay. 3D inversion with and without the seawater constraint showed very similar results at shallow depths, roughly down to 2 km. At greater depths, however, a strong sea effect seems to form a fictitious conductive structure in ordinary 3D inversion, especially in the south-eastern part of the survey region. Comparison between drilling results and the resistivity profiles from inversions showed that five layered structures can be distinguished the subsurface beneath the target area. They are: (a) semi-consolidated mudstones with resistivity less than $10\;{\Omega}m$, which are ${\sim}300\;m$ thick in the northern part and ${\sim}600\;m$ thick in the southern part of the survey area; (b) occasional occurrence of trachybasalt and lapilli tuff within the mudstone layer has resistivity of a few tens of${\Omega}m$, (c) intrusive rhyolite ${\sim}400\;m$ thick has resistivity of several hundreds of ${\Omega}m$, (d) alternating sandstone and mudstone down to 1.5 km depth shows resistivity of ${\sim}100\;{\Omega}m$, (e) a conductive structure was found at a depth of ${\sim}3\;km$, but more geological and geophysical study should be carried out to identify this structure.

• Progress in Medical Physics
• /
• v.7 no.1
• /
• pp.65-77
• /
• 1996

Using the 2-D and 3-D Hoffman brain phantom, 3-D Jaszczak phantom and Single Photon Emission Computed Tomography, the effects of data acquisition parameter, attenuation, noise, scatter and reconstruction algorithm on image quantitation as well as image quality were studied. For the data acquisition parameters, the images were acquired by changing the increment angle of rotation and the radius. The less increment angle of rotation resulted in superior image quality. Smaller radius from the center of rotation gave better image quality, since the resolution degraded as increasing the distance from detector to object increased. Using the flood data in Jaszczak phantom, the optimal attenuation coefficients were derived as 0.12cm$\^$-1/ for all collimators. Consequently, the all images were corrected for attenuation using the derived attenuation coefficients. It showed concave line profile without attenuation correction and flat line profile with attenuation correction in flood data obtained with jaszczak phantom. And the attenuation correction improved both image qulity and image quantitation. To study the effects of noise, the images were acquired for 1min, 2min, 5min, 10min, and 20min. The 20min image showed much better noise characteristics than 1min image indicating that increasing the counting time reduces the noise characteristics which follow the Poisson distribution. The images were also acquired using dual-energy windows, one for main photopeak and another one for scatter peak. The images were then compared with and without scatter correction. Scatter correction improved image quality so that the cold sphere and bar pattern in Jaszczak phantom were clearly visualized. Scatter correction was also applied to 3-D Hoffman brain phantom and resulted in better image quality. In conclusion, the SPECT images were significantly affected by the factors of data acquisition parameter, attenuation, noise, scatter, and reconstruction algorithm and these factors must be optimized or corrected to obtain the useful SPECT data in clinical applications.